Mixing
Two questions about nodes at Tikz
up vote
4
down vote
favorite
I saw this question How to change the size of nodes? and I wonder:
- If I want the nodes will be at the same size as
automatanodes, what I need to fill at size? (or the scale). - If I want make it for all the nodes (I assuming I need to write it at the beginning), what I need to write?
Here is an MWE:
% Preview source code
%% LyX 2.3.1-1 created this file. For more info, see http://www.lyx.org/.
%% Do not edit unless you really know what you are doing.
documentclass[a4paper,english,hebrew,numbers=noenddot]{scrartcl}
usepackage{amsmath}
usepackage{amsthm}
usepackage{fontspec}
makeatletter
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% LyX specific LaTeX commands.
pdfpageheightpaperheight
pdfpagewidthpaperwidth
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% User specified LaTeX commands.
usepackage{tikz}
usetikzlibrary{automata}
makeatother
usepackage{polyglossia}
setdefaultlanguage{hebrew}
setotherlanguage{english}
begin{document}
begin{center}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
parend{center}
begin{center}
begin{tikzpicture}
draw (1,1) node[circle,draw] {$1$};
end{tikzpicture}
parend{center}
end{document}
Thank you!
tikz-pgf automata
asked yesterday
heblyx
776818
add a comment |
up vote
4
down vote
favorite
I saw this question How to change the size of nodes? and I wonder:
- If I want the nodes will be at the same size as
automatanodes, what I need to fill at size? (or the scale). - If I want make it for all the nodes (I assuming I need to write it at the beginning), what I need to write?
Here is an MWE:
% Preview source code
%% LyX 2.3.1-1 created this file. For more info, see http://www.lyx.org/.
%% Do not edit unless you really know what you are doing.
documentclass[a4paper,english,hebrew,numbers=noenddot]{scrartcl}
usepackage{amsmath}
usepackage{amsthm}
usepackage{fontspec}
makeatletter
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% LyX specific LaTeX commands.
pdfpageheightpaperheight
pdfpagewidthpaperwidth
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% User specified LaTeX commands.
usepackage{tikz}
usetikzlibrary{automata}
makeatother
usepackage{polyglossia}
setdefaultlanguage{hebrew}
setotherlanguage{english}
begin{document}
begin{center}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
parend{center}
begin{center}
begin{tikzpicture}
draw (1,1) node[circle,draw] {$1$};
end{tikzpicture}
parend{center}
end{document}
Thank you!
tikz-pgf automata
asked yesterday
heblyx
776818
Add a MWE.
– nidhin
yesterday
I added it! Thank you!
– heblyx
yesterday
@heblyx, your code contais a lot of non related commands, including font changing. It is not Minimal (MWE).
– Sigur
yesterday
@Sigur, I edit my MWE, now it's better?
– heblyx
yesterday
add a comment |
up vote
4
down vote
favorite
up vote
4
down vote
favorite
I saw this question How to change the size of nodes? and I wonder:
- If I want the nodes will be at the same size as
automatanodes, what I need to fill at size? (or the scale). - If I want make it for all the nodes (I assuming I need to write it at the beginning), what I need to write?
Here is an MWE:
% Preview source code
%% LyX 2.3.1-1 created this file. For more info, see http://www.lyx.org/.
%% Do not edit unless you really know what you are doing.
documentclass[a4paper,english,hebrew,numbers=noenddot]{scrartcl}
usepackage{amsmath}
usepackage{amsthm}
usepackage{fontspec}
makeatletter
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% LyX specific LaTeX commands.
pdfpageheightpaperheight
pdfpagewidthpaperwidth
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% User specified LaTeX commands.
usepackage{tikz}
usetikzlibrary{automata}
makeatother
usepackage{polyglossia}
setdefaultlanguage{hebrew}
setotherlanguage{english}
begin{document}
begin{center}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
parend{center}
begin{center}
begin{tikzpicture}
draw (1,1) node[circle,draw] {$1$};
end{tikzpicture}
parend{center}
end{document}
Thank you!
tikz-pgf automata
asked yesterday
heblyx
776818
I saw this question How to change the size of nodes? and I wonder:
- If I want the nodes will be at the same size as
automatanodes, what I need to fill at size? (or the scale). - If I want make it for all the nodes (I assuming I need to write it at the beginning), what I need to write?
Here is an MWE:
% Preview source code
%% LyX 2.3.1-1 created this file. For more info, see http://www.lyx.org/.
%% Do not edit unless you really know what you are doing.
documentclass[a4paper,english,hebrew,numbers=noenddot]{scrartcl}
usepackage{amsmath}
usepackage{amsthm}
usepackage{fontspec}
makeatletter
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% LyX specific LaTeX commands.
pdfpageheightpaperheight
pdfpagewidthpaperwidth
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% User specified LaTeX commands.
usepackage{tikz}
usetikzlibrary{automata}
makeatother
usepackage{polyglossia}
setdefaultlanguage{hebrew}
setotherlanguage{english}
begin{document}
begin{center}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
parend{center}
begin{center}
begin{tikzpicture}
draw (1,1) node[circle,draw] {$1$};
end{tikzpicture}
parend{center}
end{document}
Thank you!
tikz-pgf automata
tikz-pgf automata
asked yesterday
heblyx
776818
asked yesterday
heblyx
776818
edited yesterday
asked yesterday
heblyx
776818
asked yesterday
heblyx
776818
asked yesterday
heblyx
776818
776818
Add a MWE.
– nidhin
yesterday
I added it! Thank you!
– heblyx
yesterday
@heblyx, your code contais a lot of non related commands, including font changing. It is not Minimal (MWE).
– Sigur
yesterday
@Sigur, I edit my MWE, now it's better?
– heblyx
yesterday
add a comment |
Add a MWE.
– nidhin
yesterday
I added it! Thank you!
– heblyx
yesterday
@heblyx, your code contais a lot of non related commands, including font changing. It is not Minimal (MWE).
– Sigur
yesterday
@Sigur, I edit my MWE, now it's better?
– heblyx
yesterday
Add a MWE.
– nidhin
yesterday
Add a MWE.
– nidhin
yesterday
I added it! Thank you!
– heblyx
yesterday
I added it! Thank you!
– heblyx
yesterday
@heblyx, your code contais a lot of non related commands, including font changing. It is not Minimal (MWE).
– Sigur
yesterday
@heblyx, your code contais a lot of non related commands, including font changing. It is not Minimal (MWE).
– Sigur
yesterday
@Sigur, I edit my MWE, now it's better?
– heblyx
yesterday
@Sigur, I edit my MWE, now it's better?
– heblyx
yesterday
add a comment |
3 Answers
3
active
oldest
votes
up vote
4
down vote
accepted
I interpret the question slightly different than Phelype. If you want all nodes in that picture to have the same size as the state nodes that come with automata, you only need to say every node/.append style={minimum width=2.5em}.
documentclass[tikz,border=3.14mm]{standalone}
usetikzlibrary{automata}
begin{document}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
begin{tikzpicture}[every node/.append style={minimum width=2.5em}]
draw (1,1) node[circle,draw] {$1$};
end{tikzpicture}
end{document}
answered yesterday
marmot
76.6k487161
Ooh, much simpler certainly :D
– Phelype Oleinik
yesterday
@PhelypeOleinik I don't know who of us gave the "correct" answer, if any. Let's see. ;-)
– marmot
yesterday
Both of you gave me a great answers! Really - so first of all - Thank you for both! :) The reason I accept your answer @marmot it's because it simpler - but both answers were great and answer my questions!
– heblyx
yesterday
add a comment |
up vote
4
down vote
When you draw a node [state], you are drawing a node [circle,draw,minimum size=2.5em,every state].
How to figure this out:
The usetikzlibrary{<library>} command loads a tikzlibrary<library>.code.tex file. Searching for the tikzlibraryautomata.code.tex file in my TeX distribution I found it at /usr/local/texlive/2018/texmf-dist/tex/generic/pgf/frontendlayer/tikz/libraries/.
I opened the file and searched for state and found at the end of the file:
tikzstyle{state}= [state without output]
so state is the same as state without output. Searching for the latter I found:
tikzstyle{state without output}= [circle,draw,minimum size=2.5em,every state]
thus, state is the same as circle,draw,minimum size=2.5em,every state, with every state being empty by default:
tikzstyle{every state}=
MWE:
documentclass{scrartcl}
usepackage{tikz}
usetikzlibrary{automata}
begin{document}
begin{center}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
end{center}
begin{center}
begin{tikzpicture}
draw (1,1) node [circle,draw,minimum size=2.5em,every state] {$1$};
end{tikzpicture}
end{center}
end{document}
Oh, and answering your second question, you can use more or less the same approach as in the package, but change the every node style. To change it globally you can use tikzset:
tikzset{
every node/.style = {
circle,draw,minimum size=2.5em,every state
}
}
or, for a single tikzpicture, you can pass this as an option:
begin{tikzpicture}[
every node/.style = {
circle,draw,minimum size=2.5em,every state
}
]
draw (1,1) node {$1$};
end{tikzpicture}
answered yesterday
Phelype Oleinik
20.4k54277
add a comment |
up vote
2
down vote
Here is a minimum example to set the size of state to known value.
documentclass[border=2mm]{standalone}
usepackage{tikz}
usetikzlibrary{automata}
begin{document}
begin{center}
begin{tikzpicture}[every state/.style={minimum size=2cm},]
node[state] (1) {$1$};
end{tikzpicture}
begin{tikzpicture}
draw (1,1) node[circle,draw,minimum size=2cm] {$1$};
end{tikzpicture}
end{center}
end{document}
answered yesterday
nidhin
1,450820
add a comment |
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
4
down vote
accepted
I interpret the question slightly different than Phelype. If you want all nodes in that picture to have the same size as the state nodes that come with automata, you only need to say every node/.append style={minimum width=2.5em}.
documentclass[tikz,border=3.14mm]{standalone}
usetikzlibrary{automata}
begin{document}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
begin{tikzpicture}[every node/.append style={minimum width=2.5em}]
draw (1,1) node[circle,draw] {$1$};
end{tikzpicture}
end{document}
answered yesterday
marmot
76.6k487161
Ooh, much simpler certainly :D
– Phelype Oleinik
yesterday
@PhelypeOleinik I don't know who of us gave the "correct" answer, if any. Let's see. ;-)
– marmot
yesterday
Both of you gave me a great answers! Really - so first of all - Thank you for both! :) The reason I accept your answer @marmot it's because it simpler - but both answers were great and answer my questions!
– heblyx
yesterday
add a comment |
up vote
4
down vote
accepted
I interpret the question slightly different than Phelype. If you want all nodes in that picture to have the same size as the state nodes that come with automata, you only need to say every node/.append style={minimum width=2.5em}.
documentclass[tikz,border=3.14mm]{standalone}
usetikzlibrary{automata}
begin{document}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
begin{tikzpicture}[every node/.append style={minimum width=2.5em}]
draw (1,1) node[circle,draw] {$1$};
end{tikzpicture}
end{document}
answered yesterday
marmot
76.6k487161
Ooh, much simpler certainly :D
– Phelype Oleinik
yesterday
@PhelypeOleinik I don't know who of us gave the "correct" answer, if any. Let's see. ;-)
– marmot
yesterday
Both of you gave me a great answers! Really - so first of all - Thank you for both! :) The reason I accept your answer @marmot it's because it simpler - but both answers were great and answer my questions!
– heblyx
yesterday
add a comment |
up vote
4
down vote
accepted
up vote
4
down vote
accepted
I interpret the question slightly different than Phelype. If you want all nodes in that picture to have the same size as the state nodes that come with automata, you only need to say every node/.append style={minimum width=2.5em}.
documentclass[tikz,border=3.14mm]{standalone}
usetikzlibrary{automata}
begin{document}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
begin{tikzpicture}[every node/.append style={minimum width=2.5em}]
draw (1,1) node[circle,draw] {$1$};
end{tikzpicture}
end{document}
answered yesterday
marmot
76.6k487161
I interpret the question slightly different than Phelype. If you want all nodes in that picture to have the same size as the state nodes that come with automata, you only need to say every node/.append style={minimum width=2.5em}.
documentclass[tikz,border=3.14mm]{standalone}
usetikzlibrary{automata}
begin{document}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
begin{tikzpicture}[every node/.append style={minimum width=2.5em}]
draw (1,1) node[circle,draw] {$1$};
end{tikzpicture}
end{document}
answered yesterday
marmot
76.6k487161
answered yesterday
marmot
76.6k487161
answered yesterday
marmot
76.6k487161
answered yesterday
marmot
76.6k487161
76.6k487161
Ooh, much simpler certainly :D
– Phelype Oleinik
yesterday
@PhelypeOleinik I don't know who of us gave the "correct" answer, if any. Let's see. ;-)
– marmot
yesterday
Both of you gave me a great answers! Really - so first of all - Thank you for both! :) The reason I accept your answer @marmot it's because it simpler - but both answers were great and answer my questions!
– heblyx
yesterday
add a comment |
Ooh, much simpler certainly :D
– Phelype Oleinik
yesterday
@PhelypeOleinik I don't know who of us gave the "correct" answer, if any. Let's see. ;-)
– marmot
yesterday
Both of you gave me a great answers! Really - so first of all - Thank you for both! :) The reason I accept your answer @marmot it's because it simpler - but both answers were great and answer my questions!
– heblyx
yesterday
Ooh, much simpler certainly :D
– Phelype Oleinik
yesterday
Ooh, much simpler certainly :D
– Phelype Oleinik
yesterday
@PhelypeOleinik I don't know who of us gave the "correct" answer, if any. Let's see. ;-)
– marmot
yesterday
@PhelypeOleinik I don't know who of us gave the "correct" answer, if any. Let's see. ;-)
– marmot
yesterday
Both of you gave me a great answers! Really - so first of all - Thank you for both! :) The reason I accept your answer @marmot it's because it simpler - but both answers were great and answer my questions!
– heblyx
yesterday
Both of you gave me a great answers! Really - so first of all - Thank you for both! :) The reason I accept your answer @marmot it's because it simpler - but both answers were great and answer my questions!
– heblyx
yesterday
add a comment |
up vote
4
down vote
When you draw a node [state], you are drawing a node [circle,draw,minimum size=2.5em,every state].
How to figure this out:
The usetikzlibrary{<library>} command loads a tikzlibrary<library>.code.tex file. Searching for the tikzlibraryautomata.code.tex file in my TeX distribution I found it at /usr/local/texlive/2018/texmf-dist/tex/generic/pgf/frontendlayer/tikz/libraries/.
I opened the file and searched for state and found at the end of the file:
tikzstyle{state}= [state without output]
so state is the same as state without output. Searching for the latter I found:
tikzstyle{state without output}= [circle,draw,minimum size=2.5em,every state]
thus, state is the same as circle,draw,minimum size=2.5em,every state, with every state being empty by default:
tikzstyle{every state}=
MWE:
documentclass{scrartcl}
usepackage{tikz}
usetikzlibrary{automata}
begin{document}
begin{center}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
end{center}
begin{center}
begin{tikzpicture}
draw (1,1) node [circle,draw,minimum size=2.5em,every state] {$1$};
end{tikzpicture}
end{center}
end{document}
Oh, and answering your second question, you can use more or less the same approach as in the package, but change the every node style. To change it globally you can use tikzset:
tikzset{
every node/.style = {
circle,draw,minimum size=2.5em,every state
}
}
or, for a single tikzpicture, you can pass this as an option:
begin{tikzpicture}[
every node/.style = {
circle,draw,minimum size=2.5em,every state
}
]
draw (1,1) node {$1$};
end{tikzpicture}
answered yesterday
Phelype Oleinik
20.4k54277
add a comment |
up vote
4
down vote
When you draw a node [state], you are drawing a node [circle,draw,minimum size=2.5em,every state].
How to figure this out:
The usetikzlibrary{<library>} command loads a tikzlibrary<library>.code.tex file. Searching for the tikzlibraryautomata.code.tex file in my TeX distribution I found it at /usr/local/texlive/2018/texmf-dist/tex/generic/pgf/frontendlayer/tikz/libraries/.
I opened the file and searched for state and found at the end of the file:
tikzstyle{state}= [state without output]
so state is the same as state without output. Searching for the latter I found:
tikzstyle{state without output}= [circle,draw,minimum size=2.5em,every state]
thus, state is the same as circle,draw,minimum size=2.5em,every state, with every state being empty by default:
tikzstyle{every state}=
MWE:
documentclass{scrartcl}
usepackage{tikz}
usetikzlibrary{automata}
begin{document}
begin{center}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
end{center}
begin{center}
begin{tikzpicture}
draw (1,1) node [circle,draw,minimum size=2.5em,every state] {$1$};
end{tikzpicture}
end{center}
end{document}
Oh, and answering your second question, you can use more or less the same approach as in the package, but change the every node style. To change it globally you can use tikzset:
tikzset{
every node/.style = {
circle,draw,minimum size=2.5em,every state
}
}
or, for a single tikzpicture, you can pass this as an option:
begin{tikzpicture}[
every node/.style = {
circle,draw,minimum size=2.5em,every state
}
]
draw (1,1) node {$1$};
end{tikzpicture}
answered yesterday
Phelype Oleinik
20.4k54277
add a comment |
up vote
4
down vote
up vote
4
down vote
When you draw a node [state], you are drawing a node [circle,draw,minimum size=2.5em,every state].
How to figure this out:
The usetikzlibrary{<library>} command loads a tikzlibrary<library>.code.tex file. Searching for the tikzlibraryautomata.code.tex file in my TeX distribution I found it at /usr/local/texlive/2018/texmf-dist/tex/generic/pgf/frontendlayer/tikz/libraries/.
I opened the file and searched for state and found at the end of the file:
tikzstyle{state}= [state without output]
so state is the same as state without output. Searching for the latter I found:
tikzstyle{state without output}= [circle,draw,minimum size=2.5em,every state]
thus, state is the same as circle,draw,minimum size=2.5em,every state, with every state being empty by default:
tikzstyle{every state}=
MWE:
documentclass{scrartcl}
usepackage{tikz}
usetikzlibrary{automata}
begin{document}
begin{center}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
end{center}
begin{center}
begin{tikzpicture}
draw (1,1) node [circle,draw,minimum size=2.5em,every state] {$1$};
end{tikzpicture}
end{center}
end{document}
Oh, and answering your second question, you can use more or less the same approach as in the package, but change the every node style. To change it globally you can use tikzset:
tikzset{
every node/.style = {
circle,draw,minimum size=2.5em,every state
}
}
or, for a single tikzpicture, you can pass this as an option:
begin{tikzpicture}[
every node/.style = {
circle,draw,minimum size=2.5em,every state
}
]
draw (1,1) node {$1$};
end{tikzpicture}
answered yesterday
Phelype Oleinik
20.4k54277
When you draw a node [state], you are drawing a node [circle,draw,minimum size=2.5em,every state].
How to figure this out:
The usetikzlibrary{<library>} command loads a tikzlibrary<library>.code.tex file. Searching for the tikzlibraryautomata.code.tex file in my TeX distribution I found it at /usr/local/texlive/2018/texmf-dist/tex/generic/pgf/frontendlayer/tikz/libraries/.
I opened the file and searched for state and found at the end of the file:
tikzstyle{state}= [state without output]
so state is the same as state without output. Searching for the latter I found:
tikzstyle{state without output}= [circle,draw,minimum size=2.5em,every state]
thus, state is the same as circle,draw,minimum size=2.5em,every state, with every state being empty by default:
tikzstyle{every state}=
MWE:
documentclass{scrartcl}
usepackage{tikz}
usetikzlibrary{automata}
begin{document}
begin{center}
begin{tikzpicture}
node[state] (1) {$1$};
end{tikzpicture}
end{center}
begin{center}
begin{tikzpicture}
draw (1,1) node [circle,draw,minimum size=2.5em,every state] {$1$};
end{tikzpicture}
end{center}
end{document}
Oh, and answering your second question, you can use more or less the same approach as in the package, but change the every node style. To change it globally you can use tikzset:
tikzset{
every node/.style = {
circle,draw,minimum size=2.5em,every state
}
}
or, for a single tikzpicture, you can pass this as an option:
begin{tikzpicture}[
every node/.style = {
circle,draw,minimum size=2.5em,every state
}
]
draw (1,1) node {$1$};
end{tikzpicture}
answered yesterday
Phelype Oleinik
20.4k54277
edited yesterday
answered yesterday
Phelype Oleinik
20.4k54277
answered yesterday
Phelype Oleinik
20.4k54277
answered yesterday
Phelype Oleinik
20.4k54277
20.4k54277
add a comment |
add a comment |
up vote
2
down vote
Here is a minimum example to set the size of state to known value.
documentclass[border=2mm]{standalone}
usepackage{tikz}
usetikzlibrary{automata}
begin{document}
begin{center}
begin{tikzpicture}[every state/.style={minimum size=2cm},]
node[state] (1) {$1$};
end{tikzpicture}
begin{tikzpicture}
draw (1,1) node[circle,draw,minimum size=2cm] {$1$};
end{tikzpicture}
end{center}
end{document}
answered yesterday
nidhin
1,450820
add a comment |
up vote
2
down vote
Here is a minimum example to set the size of state to known value.
documentclass[border=2mm]{standalone}
usepackage{tikz}
usetikzlibrary{automata}
begin{document}
begin{center}
begin{tikzpicture}[every state/.style={minimum size=2cm},]
node[state] (1) {$1$};
end{tikzpicture}
begin{tikzpicture}
draw (1,1) node[circle,draw,minimum size=2cm] {$1$};
end{tikzpicture}
end{center}
end{document}
answered yesterday
nidhin
1,450820
add a comment |
up vote
2
down vote
up vote
2
down vote
Here is a minimum example to set the size of state to known value.
documentclass[border=2mm]{standalone}
usepackage{tikz}
usetikzlibrary{automata}
begin{document}
begin{center}
begin{tikzpicture}[every state/.style={minimum size=2cm},]
node[state] (1) {$1$};
end{tikzpicture}
begin{tikzpicture}
draw (1,1) node[circle,draw,minimum size=2cm] {$1$};
end{tikzpicture}
end{center}
end{document}
answered yesterday
nidhin
1,450820
Here is a minimum example to set the size of state to known value.
documentclass[border=2mm]{standalone}
usepackage{tikz}
usetikzlibrary{automata}
begin{document}
begin{center}
begin{tikzpicture}[every state/.style={minimum size=2cm},]
node[state] (1) {$1$};
end{tikzpicture}
begin{tikzpicture}
draw (1,1) node[circle,draw,minimum size=2cm] {$1$};
end{tikzpicture}
end{center}
end{document}
answered yesterday
nidhin
1,450820
answered yesterday
nidhin
1,450820
answered yesterday
nidhin
1,450820
answered yesterday
nidhin
1,450820
1,450820
add a comment |
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f460730%2ftwo-questions-about-nodes-at-tikz%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Add a MWE.
– nidhin
yesterday
I added it! Thank you!
– heblyx
yesterday
@heblyx, your code contais a lot of non related commands, including font changing. It is not Minimal (MWE).
– Sigur
yesterday
@Sigur, I edit my MWE, now it's better?
– heblyx
yesterday