Mixing
How can I successfully bind with CFLDAP?
I'm trying to query AD for groups etc associated with a specified username. I have confirmed with my associates that I should have permissions to query AD. Using the following code in my ColdFusion page:
<cfldap server="my.server.com"
action="query"
name="results"
attributes="dn,cn,sn,givenname,uid"
start="CN=Users,DC=my,DC=server,DC=com"
filter="(&(objectclass=user)(sn=*todd*))"
scope="onelevel"
maxrows=100
>
But I'm getting the error:
"An error has occurred while trying to execute query :[LDAP: error code 1 - 000004DC: LdapErr: DSID-0C09079A, comment: In order to perform this operation a successful bind must be completed on the connection., data 0, v23f0 ]."
Any help/direction is greatly appreciated.
coldfusion active-directory
asked Nov 19 '18 at 17:07
Todd K
338
add a comment |
I'm trying to query AD for groups etc associated with a specified username. I have confirmed with my associates that I should have permissions to query AD. Using the following code in my ColdFusion page:
<cfldap server="my.server.com"
action="query"
name="results"
attributes="dn,cn,sn,givenname,uid"
start="CN=Users,DC=my,DC=server,DC=com"
filter="(&(objectclass=user)(sn=*todd*))"
scope="onelevel"
maxrows=100
>
But I'm getting the error:
"An error has occurred while trying to execute query :[LDAP: error code 1 - 000004DC: LdapErr: DSID-0C09079A, comment: In order to perform this operation a successful bind must be completed on the connection., data 0, v23f0 ]."
Any help/direction is greatly appreciated.
coldfusion active-directory
asked Nov 19 '18 at 17:07
Todd K
338
add a comment |
I'm trying to query AD for groups etc associated with a specified username. I have confirmed with my associates that I should have permissions to query AD. Using the following code in my ColdFusion page:
<cfldap server="my.server.com"
action="query"
name="results"
attributes="dn,cn,sn,givenname,uid"
start="CN=Users,DC=my,DC=server,DC=com"
filter="(&(objectclass=user)(sn=*todd*))"
scope="onelevel"
maxrows=100
>
But I'm getting the error:
"An error has occurred while trying to execute query :[LDAP: error code 1 - 000004DC: LdapErr: DSID-0C09079A, comment: In order to perform this operation a successful bind must be completed on the connection., data 0, v23f0 ]."
Any help/direction is greatly appreciated.
coldfusion active-directory
asked Nov 19 '18 at 17:07
Todd K
338
I'm trying to query AD for groups etc associated with a specified username. I have confirmed with my associates that I should have permissions to query AD. Using the following code in my ColdFusion page:
<cfldap server="my.server.com"
action="query"
name="results"
attributes="dn,cn,sn,givenname,uid"
start="CN=Users,DC=my,DC=server,DC=com"
filter="(&(objectclass=user)(sn=*todd*))"
scope="onelevel"
maxrows=100
>
But I'm getting the error:
"An error has occurred while trying to execute query :[LDAP: error code 1 - 000004DC: LdapErr: DSID-0C09079A, comment: In order to perform this operation a successful bind must be completed on the connection., data 0, v23f0 ]."
Any help/direction is greatly appreciated.
coldfusion active-directory
coldfusion active-directory
asked Nov 19 '18 at 17:07
Todd K
338
asked Nov 19 '18 at 17:07
Todd K
338
asked Nov 19 '18 at 17:07
Todd K
338
asked Nov 19 '18 at 17:07
Todd K
338
asked Nov 19 '18 at 17:07
Todd K
338
338
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Active Directory rarely has anonymous read enabled, so you need to bind before performing any searches. I use a dedicated "system" account for this (you can use yours, but then the whole thing falls over next time you change your password). Below is what I use for a form that handles user authentication. This is LDAPS, which requires that your java instance trusts the signer of the directory cert -- it's often easier to start with clear text LDAP, get everything working, then switch over to SSL.
<!--- If the server has been defined, run the query --->
<CFIF IsDefined("form.server")>
<!--- check to see that there is a name listed --->
<CFIF form.name is not "">
<!--- make the LDAP query --->
<cfldap action="QUERY"
server="my.server.com"
port="636"
username="cn=YOURSYSTEMIDGOESHERE,ou=systemids,dc=my,dc=server,dc=com"
password="YOURPASSWORDGOESHERE"
name="getldap"
start="CN=Users,DC=my,DC=server,DC=com"
attributes="dn"
scope="subtree"
filter="(&(objectclass=user)(sAMAccountName=#form.uid#))"
secure="CFSSL_BASIC"
maxrows="10">
<CFIF getldap.RecordCount GT 1>
<!--- Too many accounts exist in LDP, throw message to call the help desk --->
<CFELSEIF getldap.RecordCount EQ 0>
<!--- User does not exist in directory, fail auth --->
<CFELSE>
<!--- Attempt Authentication using supplied credentials --->
<cfldap action="QUERY"
server="my.server.com"
port="636"
username="#getldap.dn#"
password="#form.password#"
name="attemptauth"
secure="CFSSL_BASIC"
start="CN=Users,DC=my,DC=server,DC=com"
attributes="dn"
>
<!--- Do something here to catch errors, on return code 0, auth is successful --->
<!--- Error code 19, hex 0x13) is a locked out account and fail auth --->
<!--- Error code 49, hex 0x31) is an invalid password error and fail auth --->
<!--- Other errors are system-type problems, throw try again / call help desk type error --->
</CFIF>
</CFIF>
</CFIF>
asdfa
answered Nov 19 '18 at 19:19
LisaJ
665213
I had a service account created, and they tested it to make sure it works in regular LDAP. I tried using it in my cfldap tag and now I'm getting the error: LDAP: error code 49 - 80090308: LdapErr: DSID-0C09042F, comment: AcceptSecurityContext error, data 52e, v2580
– Todd K
Nov 29 '18 at 15:04
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53379523%2fhow-can-i-successfully-bind-with-cfldap%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Active Directory rarely has anonymous read enabled, so you need to bind before performing any searches. I use a dedicated "system" account for this (you can use yours, but then the whole thing falls over next time you change your password). Below is what I use for a form that handles user authentication. This is LDAPS, which requires that your java instance trusts the signer of the directory cert -- it's often easier to start with clear text LDAP, get everything working, then switch over to SSL.
<!--- If the server has been defined, run the query --->
<CFIF IsDefined("form.server")>
<!--- check to see that there is a name listed --->
<CFIF form.name is not "">
<!--- make the LDAP query --->
<cfldap action="QUERY"
server="my.server.com"
port="636"
username="cn=YOURSYSTEMIDGOESHERE,ou=systemids,dc=my,dc=server,dc=com"
password="YOURPASSWORDGOESHERE"
name="getldap"
start="CN=Users,DC=my,DC=server,DC=com"
attributes="dn"
scope="subtree"
filter="(&(objectclass=user)(sAMAccountName=#form.uid#))"
secure="CFSSL_BASIC"
maxrows="10">
<CFIF getldap.RecordCount GT 1>
<!--- Too many accounts exist in LDP, throw message to call the help desk --->
<CFELSEIF getldap.RecordCount EQ 0>
<!--- User does not exist in directory, fail auth --->
<CFELSE>
<!--- Attempt Authentication using supplied credentials --->
<cfldap action="QUERY"
server="my.server.com"
port="636"
username="#getldap.dn#"
password="#form.password#"
name="attemptauth"
secure="CFSSL_BASIC"
start="CN=Users,DC=my,DC=server,DC=com"
attributes="dn"
>
<!--- Do something here to catch errors, on return code 0, auth is successful --->
<!--- Error code 19, hex 0x13) is a locked out account and fail auth --->
<!--- Error code 49, hex 0x31) is an invalid password error and fail auth --->
<!--- Other errors are system-type problems, throw try again / call help desk type error --->
</CFIF>
</CFIF>
</CFIF>
asdfa
answered Nov 19 '18 at 19:19
LisaJ
665213
I had a service account created, and they tested it to make sure it works in regular LDAP. I tried using it in my cfldap tag and now I'm getting the error: LDAP: error code 49 - 80090308: LdapErr: DSID-0C09042F, comment: AcceptSecurityContext error, data 52e, v2580
– Todd K
Nov 29 '18 at 15:04
add a comment |
Active Directory rarely has anonymous read enabled, so you need to bind before performing any searches. I use a dedicated "system" account for this (you can use yours, but then the whole thing falls over next time you change your password). Below is what I use for a form that handles user authentication. This is LDAPS, which requires that your java instance trusts the signer of the directory cert -- it's often easier to start with clear text LDAP, get everything working, then switch over to SSL.
<!--- If the server has been defined, run the query --->
<CFIF IsDefined("form.server")>
<!--- check to see that there is a name listed --->
<CFIF form.name is not "">
<!--- make the LDAP query --->
<cfldap action="QUERY"
server="my.server.com"
port="636"
username="cn=YOURSYSTEMIDGOESHERE,ou=systemids,dc=my,dc=server,dc=com"
password="YOURPASSWORDGOESHERE"
name="getldap"
start="CN=Users,DC=my,DC=server,DC=com"
attributes="dn"
scope="subtree"
filter="(&(objectclass=user)(sAMAccountName=#form.uid#))"
secure="CFSSL_BASIC"
maxrows="10">
<CFIF getldap.RecordCount GT 1>
<!--- Too many accounts exist in LDP, throw message to call the help desk --->
<CFELSEIF getldap.RecordCount EQ 0>
<!--- User does not exist in directory, fail auth --->
<CFELSE>
<!--- Attempt Authentication using supplied credentials --->
<cfldap action="QUERY"
server="my.server.com"
port="636"
username="#getldap.dn#"
password="#form.password#"
name="attemptauth"
secure="CFSSL_BASIC"
start="CN=Users,DC=my,DC=server,DC=com"
attributes="dn"
>
<!--- Do something here to catch errors, on return code 0, auth is successful --->
<!--- Error code 19, hex 0x13) is a locked out account and fail auth --->
<!--- Error code 49, hex 0x31) is an invalid password error and fail auth --->
<!--- Other errors are system-type problems, throw try again / call help desk type error --->
</CFIF>
</CFIF>
</CFIF>
asdfa
answered Nov 19 '18 at 19:19
LisaJ
665213
I had a service account created, and they tested it to make sure it works in regular LDAP. I tried using it in my cfldap tag and now I'm getting the error: LDAP: error code 49 - 80090308: LdapErr: DSID-0C09042F, comment: AcceptSecurityContext error, data 52e, v2580
– Todd K
Nov 29 '18 at 15:04
add a comment |
Active Directory rarely has anonymous read enabled, so you need to bind before performing any searches. I use a dedicated "system" account for this (you can use yours, but then the whole thing falls over next time you change your password). Below is what I use for a form that handles user authentication. This is LDAPS, which requires that your java instance trusts the signer of the directory cert -- it's often easier to start with clear text LDAP, get everything working, then switch over to SSL.
<!--- If the server has been defined, run the query --->
<CFIF IsDefined("form.server")>
<!--- check to see that there is a name listed --->
<CFIF form.name is not "">
<!--- make the LDAP query --->
<cfldap action="QUERY"
server="my.server.com"
port="636"
username="cn=YOURSYSTEMIDGOESHERE,ou=systemids,dc=my,dc=server,dc=com"
password="YOURPASSWORDGOESHERE"
name="getldap"
start="CN=Users,DC=my,DC=server,DC=com"
attributes="dn"
scope="subtree"
filter="(&(objectclass=user)(sAMAccountName=#form.uid#))"
secure="CFSSL_BASIC"
maxrows="10">
<CFIF getldap.RecordCount GT 1>
<!--- Too many accounts exist in LDP, throw message to call the help desk --->
<CFELSEIF getldap.RecordCount EQ 0>
<!--- User does not exist in directory, fail auth --->
<CFELSE>
<!--- Attempt Authentication using supplied credentials --->
<cfldap action="QUERY"
server="my.server.com"
port="636"
username="#getldap.dn#"
password="#form.password#"
name="attemptauth"
secure="CFSSL_BASIC"
start="CN=Users,DC=my,DC=server,DC=com"
attributes="dn"
>
<!--- Do something here to catch errors, on return code 0, auth is successful --->
<!--- Error code 19, hex 0x13) is a locked out account and fail auth --->
<!--- Error code 49, hex 0x31) is an invalid password error and fail auth --->
<!--- Other errors are system-type problems, throw try again / call help desk type error --->
</CFIF>
</CFIF>
</CFIF>
asdfa
answered Nov 19 '18 at 19:19
LisaJ
665213
Active Directory rarely has anonymous read enabled, so you need to bind before performing any searches. I use a dedicated "system" account for this (you can use yours, but then the whole thing falls over next time you change your password). Below is what I use for a form that handles user authentication. This is LDAPS, which requires that your java instance trusts the signer of the directory cert -- it's often easier to start with clear text LDAP, get everything working, then switch over to SSL.
<!--- If the server has been defined, run the query --->
<CFIF IsDefined("form.server")>
<!--- check to see that there is a name listed --->
<CFIF form.name is not "">
<!--- make the LDAP query --->
<cfldap action="QUERY"
server="my.server.com"
port="636"
username="cn=YOURSYSTEMIDGOESHERE,ou=systemids,dc=my,dc=server,dc=com"
password="YOURPASSWORDGOESHERE"
name="getldap"
start="CN=Users,DC=my,DC=server,DC=com"
attributes="dn"
scope="subtree"
filter="(&(objectclass=user)(sAMAccountName=#form.uid#))"
secure="CFSSL_BASIC"
maxrows="10">
<CFIF getldap.RecordCount GT 1>
<!--- Too many accounts exist in LDP, throw message to call the help desk --->
<CFELSEIF getldap.RecordCount EQ 0>
<!--- User does not exist in directory, fail auth --->
<CFELSE>
<!--- Attempt Authentication using supplied credentials --->
<cfldap action="QUERY"
server="my.server.com"
port="636"
username="#getldap.dn#"
password="#form.password#"
name="attemptauth"
secure="CFSSL_BASIC"
start="CN=Users,DC=my,DC=server,DC=com"
attributes="dn"
>
<!--- Do something here to catch errors, on return code 0, auth is successful --->
<!--- Error code 19, hex 0x13) is a locked out account and fail auth --->
<!--- Error code 49, hex 0x31) is an invalid password error and fail auth --->
<!--- Other errors are system-type problems, throw try again / call help desk type error --->
</CFIF>
</CFIF>
</CFIF>
asdfa
answered Nov 19 '18 at 19:19
LisaJ
665213
answered Nov 19 '18 at 19:19
LisaJ
665213
answered Nov 19 '18 at 19:19
LisaJ
665213
answered Nov 19 '18 at 19:19
LisaJ
665213
665213
I had a service account created, and they tested it to make sure it works in regular LDAP. I tried using it in my cfldap tag and now I'm getting the error: LDAP: error code 49 - 80090308: LdapErr: DSID-0C09042F, comment: AcceptSecurityContext error, data 52e, v2580
– Todd K
Nov 29 '18 at 15:04
add a comment |
I had a service account created, and they tested it to make sure it works in regular LDAP. I tried using it in my cfldap tag and now I'm getting the error: LDAP: error code 49 - 80090308: LdapErr: DSID-0C09042F, comment: AcceptSecurityContext error, data 52e, v2580
– Todd K
Nov 29 '18 at 15:04
I had a service account created, and they tested it to make sure it works in regular LDAP. I tried using it in my cfldap tag and now I'm getting the error: LDAP: error code 49 - 80090308: LdapErr: DSID-0C09042F, comment: AcceptSecurityContext error, data 52e, v2580
– Todd K
Nov 29 '18 at 15:04
I had a service account created, and they tested it to make sure it works in regular LDAP. I tried using it in my cfldap tag and now I'm getting the error: LDAP: error code 49 - 80090308: LdapErr: DSID-0C09042F, comment: AcceptSecurityContext error, data 52e, v2580
– Todd K
Nov 29 '18 at 15:04
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53379523%2fhow-can-i-successfully-bind-with-cfldap%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
