Mixing
Oil in the cooling reservoir
I have milky white oil in the cooling reservoir. The vehicle in question is a BMW 318i and was bought 5 days ago.
What would be the most like cause?
engine bmw head-gasket
edited Nov 22 '18 at 9:32
Martin
5,02711130
asked Nov 22 '18 at 3:31
wahedwahed
161
add a comment |
I have milky white oil in the cooling reservoir. The vehicle in question is a BMW 318i and was bought 5 days ago.
What would be the most like cause?
engine bmw head-gasket
edited Nov 22 '18 at 9:32
Martin
5,02711130
asked Nov 22 '18 at 3:31
wahedwahed
161
Hi and welcome to mechanics.stackexchange. Your question needs a little clarification because it is hard to be understood.
– kokobill
Nov 22 '18 at 7:35
What year is it? Other than the head gasket, a common point of failure on BMW motors that can cause oil and coolant to mix is the oil filter housing gasket. Are there any visible signs of oil leaking on the motor? Note, if the engine has been steam cleaned, I'd be suspicious as to why at this point.
– Comintern
Nov 22 '18 at 16:36
add a comment |
I have milky white oil in the cooling reservoir. The vehicle in question is a BMW 318i and was bought 5 days ago.
What would be the most like cause?
engine bmw head-gasket
edited Nov 22 '18 at 9:32
Martin
5,02711130
asked Nov 22 '18 at 3:31
wahedwahed
161
I have milky white oil in the cooling reservoir. The vehicle in question is a BMW 318i and was bought 5 days ago.
What would be the most like cause?
engine bmw head-gasket
engine bmw head-gasket
edited Nov 22 '18 at 9:32
Martin
5,02711130
asked Nov 22 '18 at 3:31
wahedwahed
161
edited Nov 22 '18 at 9:32
Martin
5,02711130
asked Nov 22 '18 at 3:31
wahedwahed
161
edited Nov 22 '18 at 9:32
Martin
5,02711130
edited Nov 22 '18 at 9:32
Martin
5,02711130
edited Nov 22 '18 at 9:32
Martin
5,02711130
5,02711130
asked Nov 22 '18 at 3:31
wahedwahed
161
asked Nov 22 '18 at 3:31
wahedwahed
161
asked Nov 22 '18 at 3:31
wahedwahed
161
161
Hi and welcome to mechanics.stackexchange. Your question needs a little clarification because it is hard to be understood.
– kokobill
Nov 22 '18 at 7:35
What year is it? Other than the head gasket, a common point of failure on BMW motors that can cause oil and coolant to mix is the oil filter housing gasket. Are there any visible signs of oil leaking on the motor? Note, if the engine has been steam cleaned, I'd be suspicious as to why at this point.
– Comintern
Nov 22 '18 at 16:36
add a comment |
Hi and welcome to mechanics.stackexchange. Your question needs a little clarification because it is hard to be understood.
– kokobill
Nov 22 '18 at 7:35
What year is it? Other than the head gasket, a common point of failure on BMW motors that can cause oil and coolant to mix is the oil filter housing gasket. Are there any visible signs of oil leaking on the motor? Note, if the engine has been steam cleaned, I'd be suspicious as to why at this point.
– Comintern
Nov 22 '18 at 16:36
Hi and welcome to mechanics.stackexchange. Your question needs a little clarification because it is hard to be understood.
– kokobill
Nov 22 '18 at 7:35
Hi and welcome to mechanics.stackexchange. Your question needs a little clarification because it is hard to be understood.
– kokobill
Nov 22 '18 at 7:35
What year is it? Other than the head gasket, a common point of failure on BMW motors that can cause oil and coolant to mix is the oil filter housing gasket. Are there any visible signs of oil leaking on the motor? Note, if the engine has been steam cleaned, I'd be suspicious as to why at this point.
– Comintern
Nov 22 '18 at 16:36
What year is it? Other than the head gasket, a common point of failure on BMW motors that can cause oil and coolant to mix is the oil filter housing gasket. Are there any visible signs of oil leaking on the motor? Note, if the engine has been steam cleaned, I'd be suspicious as to why at this point.
– Comintern
Nov 22 '18 at 16:36
add a comment |
2 Answers
2
active
oldest
votes
Welcome to Mechanics SE! A white milky, mayonnaise like substance is indicative of oil and water mixing. This could be down to a failed cylinder head gasket or a failed oil cooler. I'm not sure if your car has an oil cooler but the first thing I'd do would be to have the engine either compression or leak down tested. Either of these tests ought to indicate the condition of your cylinder head gasket.
answered Nov 22 '18 at 9:45
Steve MatthewsSteve Matthews
19.9k22970
add a comment |
Textbook root cause nr. 1 would be a damaged head-gasket,
other possible issues are:
- Cracks in the engine head or, heaven forbid, the engine block.
- Some issues with the oil heat exchanger (if equipped)
- Issues with the transmission cooler (if equipped)
Either way this is something serious, I would try to rollback the purchase (if possible) or let someone fix the issue (costly).
answered Nov 22 '18 at 9:46
MartinMartin
5,02711130
1
You've been sold a car with issues @wahed, get your money back ASAP!
– GdD
Nov 22 '18 at 11:26
@GdD that depends where the OP is located. In some countries, things are sold as is and no returns can be made once the sale is complete. It's up to the buyer to ensure what the buying satisfies their needs.
– BossRoss
Nov 22 '18 at 14:51
He can try @BossRoss.
– GdD
Nov 22 '18 at 14:58
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "224"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmechanics.stackexchange.com%2fquestions%2f61112%2foil-in-the-cooling-reservoir%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Welcome to Mechanics SE! A white milky, mayonnaise like substance is indicative of oil and water mixing. This could be down to a failed cylinder head gasket or a failed oil cooler. I'm not sure if your car has an oil cooler but the first thing I'd do would be to have the engine either compression or leak down tested. Either of these tests ought to indicate the condition of your cylinder head gasket.
answered Nov 22 '18 at 9:45
Steve MatthewsSteve Matthews
19.9k22970
add a comment |
Welcome to Mechanics SE! A white milky, mayonnaise like substance is indicative of oil and water mixing. This could be down to a failed cylinder head gasket or a failed oil cooler. I'm not sure if your car has an oil cooler but the first thing I'd do would be to have the engine either compression or leak down tested. Either of these tests ought to indicate the condition of your cylinder head gasket.
answered Nov 22 '18 at 9:45
Steve MatthewsSteve Matthews
19.9k22970
add a comment |
Welcome to Mechanics SE! A white milky, mayonnaise like substance is indicative of oil and water mixing. This could be down to a failed cylinder head gasket or a failed oil cooler. I'm not sure if your car has an oil cooler but the first thing I'd do would be to have the engine either compression or leak down tested. Either of these tests ought to indicate the condition of your cylinder head gasket.
answered Nov 22 '18 at 9:45
Steve MatthewsSteve Matthews
19.9k22970
Welcome to Mechanics SE! A white milky, mayonnaise like substance is indicative of oil and water mixing. This could be down to a failed cylinder head gasket or a failed oil cooler. I'm not sure if your car has an oil cooler but the first thing I'd do would be to have the engine either compression or leak down tested. Either of these tests ought to indicate the condition of your cylinder head gasket.
answered Nov 22 '18 at 9:45
Steve MatthewsSteve Matthews
19.9k22970
answered Nov 22 '18 at 9:45
Steve MatthewsSteve Matthews
19.9k22970
answered Nov 22 '18 at 9:45
Steve MatthewsSteve Matthews
19.9k22970
answered Nov 22 '18 at 9:45
Steve MatthewsSteve Matthews
19.9k22970
19.9k22970
add a comment |
add a comment |
Textbook root cause nr. 1 would be a damaged head-gasket,
other possible issues are:
- Cracks in the engine head or, heaven forbid, the engine block.
- Some issues with the oil heat exchanger (if equipped)
- Issues with the transmission cooler (if equipped)
Either way this is something serious, I would try to rollback the purchase (if possible) or let someone fix the issue (costly).
answered Nov 22 '18 at 9:46
MartinMartin
5,02711130
1
You've been sold a car with issues @wahed, get your money back ASAP!
– GdD
Nov 22 '18 at 11:26
@GdD that depends where the OP is located. In some countries, things are sold as is and no returns can be made once the sale is complete. It's up to the buyer to ensure what the buying satisfies their needs.
– BossRoss
Nov 22 '18 at 14:51
He can try @BossRoss.
– GdD
Nov 22 '18 at 14:58
add a comment |
Textbook root cause nr. 1 would be a damaged head-gasket,
other possible issues are:
- Cracks in the engine head or, heaven forbid, the engine block.
- Some issues with the oil heat exchanger (if equipped)
- Issues with the transmission cooler (if equipped)
Either way this is something serious, I would try to rollback the purchase (if possible) or let someone fix the issue (costly).
answered Nov 22 '18 at 9:46
MartinMartin
5,02711130
1
You've been sold a car with issues @wahed, get your money back ASAP!
– GdD
Nov 22 '18 at 11:26
@GdD that depends where the OP is located. In some countries, things are sold as is and no returns can be made once the sale is complete. It's up to the buyer to ensure what the buying satisfies their needs.
– BossRoss
Nov 22 '18 at 14:51
He can try @BossRoss.
– GdD
Nov 22 '18 at 14:58
add a comment |
Textbook root cause nr. 1 would be a damaged head-gasket,
other possible issues are:
- Cracks in the engine head or, heaven forbid, the engine block.
- Some issues with the oil heat exchanger (if equipped)
- Issues with the transmission cooler (if equipped)
Either way this is something serious, I would try to rollback the purchase (if possible) or let someone fix the issue (costly).
answered Nov 22 '18 at 9:46
MartinMartin
5,02711130
Textbook root cause nr. 1 would be a damaged head-gasket,
other possible issues are:
- Cracks in the engine head or, heaven forbid, the engine block.
- Some issues with the oil heat exchanger (if equipped)
- Issues with the transmission cooler (if equipped)
Either way this is something serious, I would try to rollback the purchase (if possible) or let someone fix the issue (costly).
answered Nov 22 '18 at 9:46
MartinMartin
5,02711130
answered Nov 22 '18 at 9:46
MartinMartin
5,02711130
answered Nov 22 '18 at 9:46
MartinMartin
5,02711130
answered Nov 22 '18 at 9:46
MartinMartin
5,02711130
5,02711130
1
You've been sold a car with issues @wahed, get your money back ASAP!
– GdD
Nov 22 '18 at 11:26
@GdD that depends where the OP is located. In some countries, things are sold as is and no returns can be made once the sale is complete. It's up to the buyer to ensure what the buying satisfies their needs.
– BossRoss
Nov 22 '18 at 14:51
He can try @BossRoss.
– GdD
Nov 22 '18 at 14:58
add a comment |
1
You've been sold a car with issues @wahed, get your money back ASAP!
– GdD
Nov 22 '18 at 11:26
@GdD that depends where the OP is located. In some countries, things are sold as is and no returns can be made once the sale is complete. It's up to the buyer to ensure what the buying satisfies their needs.
– BossRoss
Nov 22 '18 at 14:51
He can try @BossRoss.
– GdD
Nov 22 '18 at 14:58
1
1
You've been sold a car with issues @wahed, get your money back ASAP!
– GdD
Nov 22 '18 at 11:26
You've been sold a car with issues @wahed, get your money back ASAP!
– GdD
Nov 22 '18 at 11:26
@GdD that depends where the OP is located. In some countries, things are sold as is and no returns can be made once the sale is complete. It's up to the buyer to ensure what the buying satisfies their needs.
– BossRoss
Nov 22 '18 at 14:51
@GdD that depends where the OP is located. In some countries, things are sold as is and no returns can be made once the sale is complete. It's up to the buyer to ensure what the buying satisfies their needs.
– BossRoss
Nov 22 '18 at 14:51
He can try @BossRoss.
– GdD
Nov 22 '18 at 14:58
He can try @BossRoss.
– GdD
Nov 22 '18 at 14:58
add a comment |
Thanks for contributing an answer to Motor Vehicle Maintenance & Repair Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmechanics.stackexchange.com%2fquestions%2f61112%2foil-in-the-cooling-reservoir%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Hi and welcome to mechanics.stackexchange. Your question needs a little clarification because it is hard to be understood.
– kokobill
Nov 22 '18 at 7:35
What year is it? Other than the head gasket, a common point of failure on BMW motors that can cause oil and coolant to mix is the oil filter housing gasket. Are there any visible signs of oil leaking on the motor? Note, if the engine has been steam cleaned, I'd be suspicious as to why at this point.
– Comintern
Nov 22 '18 at 16:36