Mixing
How do I remove unnecessary fills in an EAGLE polygon?
$begingroup$
There are a lot of resistors and diodes on the board, where the polygon passes like this. How can I get rid of it?
pcb eagle polygon
edited Jan 3 at 18:15
Peter Mortensen
1,60031422
asked Jan 3 at 10:53
Алекс ГарисонАлекс Гарисон
465
$endgroup$
add a comment |
$begingroup$
There are a lot of resistors and diodes on the board, where the polygon passes like this. How can I get rid of it?
pcb eagle polygon
edited Jan 3 at 18:15
Peter Mortensen
1,60031422
asked Jan 3 at 10:53
Алекс ГарисонАлекс Гарисон
465
$endgroup$
$begingroup$
Is there a reason why you want to remove this? Why do you mean that they are "unnecessary"?
$endgroup$
– pipe
Jan 3 at 13:44
add a comment |
$begingroup$
There are a lot of resistors and diodes on the board, where the polygon passes like this. How can I get rid of it?
pcb eagle polygon
edited Jan 3 at 18:15
Peter Mortensen
1,60031422
asked Jan 3 at 10:53
Алекс ГарисонАлекс Гарисон
465
$endgroup$
There are a lot of resistors and diodes on the board, where the polygon passes like this. How can I get rid of it?
pcb eagle polygon
pcb eagle polygon
edited Jan 3 at 18:15
Peter Mortensen
1,60031422
asked Jan 3 at 10:53
Алекс ГарисонАлекс Гарисон
465
edited Jan 3 at 18:15
Peter Mortensen
1,60031422
asked Jan 3 at 10:53
Алекс ГарисонАлекс Гарисон
465
edited Jan 3 at 18:15
Peter Mortensen
1,60031422
edited Jan 3 at 18:15
Peter Mortensen
1,60031422
edited Jan 3 at 18:15
Peter Mortensen
1,60031422
1,60031422
asked Jan 3 at 10:53
Алекс ГарисонАлекс Гарисон
465
asked Jan 3 at 10:53
Алекс ГарисонАлекс Гарисон
465
asked Jan 3 at 10:53
Алекс ГарисонАлекс Гарисон
465
465
$begingroup$
Is there a reason why you want to remove this? Why do you mean that they are "unnecessary"?
$endgroup$
– pipe
Jan 3 at 13:44
add a comment |
$begingroup$
Is there a reason why you want to remove this? Why do you mean that they are "unnecessary"?
$endgroup$
– pipe
Jan 3 at 13:44
$begingroup$
Is there a reason why you want to remove this? Why do you mean that they are "unnecessary"?
$endgroup$
– pipe
Jan 3 at 13:44
$begingroup$
Is there a reason why you want to remove this? Why do you mean that they are "unnecessary"?
$endgroup$
– pipe
Jan 3 at 13:44
add a comment |
2 Answers
2
active
oldest
votes
$begingroup$
You can draw on 41 tRestrict and 42 bRestrict to prevent the pour on those places.
Traces overlapping these layers will cause DRC violations.
The pour will keep the isolate distance in the polygon properties from the restrict layer objects.
Example:
answered Jan 3 at 11:04
Jeroen3Jeroen3
11.3k1748
$endgroup$
$begingroup$
That helped! Thank you!
$endgroup$
– Алекс Гарисон
Jan 3 at 11:16
add a comment |
$begingroup$
They are not redundant, it's really the whole point of a polygon pour: to reduce the impedance of the filled area. That said, a lot of people do it to be lazy (no judgement being made)..! Jereon's method is the scalpel blade approach (and the most correct). The hammer approach is to simply increase the "isolate" value of the polygon until it doesn't fill in between the pads of your components.
answered Jan 3 at 11:17
awjloganawjlogan
3,42611327
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
});
});
}, "mathjax-editing");
StackExchange.ifUsing("editor", function () {
return StackExchange.using("schematics", function () {
StackExchange.schematics.init();
});
}, "cicuitlab");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "135"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f415015%2fhow-do-i-remove-unnecessary-fills-in-an-eagle-polygon%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
You can draw on 41 tRestrict and 42 bRestrict to prevent the pour on those places.
Traces overlapping these layers will cause DRC violations.
The pour will keep the isolate distance in the polygon properties from the restrict layer objects.
Example:
answered Jan 3 at 11:04
Jeroen3Jeroen3
11.3k1748
$endgroup$
$begingroup$
That helped! Thank you!
$endgroup$
– Алекс Гарисон
Jan 3 at 11:16
add a comment |
$begingroup$
You can draw on 41 tRestrict and 42 bRestrict to prevent the pour on those places.
Traces overlapping these layers will cause DRC violations.
The pour will keep the isolate distance in the polygon properties from the restrict layer objects.
Example:
answered Jan 3 at 11:04
Jeroen3Jeroen3
11.3k1748
$endgroup$
$begingroup$
That helped! Thank you!
$endgroup$
– Алекс Гарисон
Jan 3 at 11:16
add a comment |
$begingroup$
You can draw on 41 tRestrict and 42 bRestrict to prevent the pour on those places.
Traces overlapping these layers will cause DRC violations.
The pour will keep the isolate distance in the polygon properties from the restrict layer objects.
Example:
answered Jan 3 at 11:04
Jeroen3Jeroen3
11.3k1748
$endgroup$
You can draw on 41 tRestrict and 42 bRestrict to prevent the pour on those places.
Traces overlapping these layers will cause DRC violations.
The pour will keep the isolate distance in the polygon properties from the restrict layer objects.
Example:
answered Jan 3 at 11:04
Jeroen3Jeroen3
11.3k1748
answered Jan 3 at 11:04
Jeroen3Jeroen3
11.3k1748
answered Jan 3 at 11:04
Jeroen3Jeroen3
11.3k1748
answered Jan 3 at 11:04
Jeroen3Jeroen3
11.3k1748
11.3k1748
$begingroup$
That helped! Thank you!
$endgroup$
– Алекс Гарисон
Jan 3 at 11:16
add a comment |
$begingroup$
That helped! Thank you!
$endgroup$
– Алекс Гарисон
Jan 3 at 11:16
$begingroup$
That helped! Thank you!
$endgroup$
– Алекс Гарисон
Jan 3 at 11:16
$begingroup$
That helped! Thank you!
$endgroup$
– Алекс Гарисон
Jan 3 at 11:16
add a comment |
$begingroup$
They are not redundant, it's really the whole point of a polygon pour: to reduce the impedance of the filled area. That said, a lot of people do it to be lazy (no judgement being made)..! Jereon's method is the scalpel blade approach (and the most correct). The hammer approach is to simply increase the "isolate" value of the polygon until it doesn't fill in between the pads of your components.
answered Jan 3 at 11:17
awjloganawjlogan
3,42611327
$endgroup$
add a comment |
$begingroup$
They are not redundant, it's really the whole point of a polygon pour: to reduce the impedance of the filled area. That said, a lot of people do it to be lazy (no judgement being made)..! Jereon's method is the scalpel blade approach (and the most correct). The hammer approach is to simply increase the "isolate" value of the polygon until it doesn't fill in between the pads of your components.
answered Jan 3 at 11:17
awjloganawjlogan
3,42611327
$endgroup$
add a comment |
$begingroup$
They are not redundant, it's really the whole point of a polygon pour: to reduce the impedance of the filled area. That said, a lot of people do it to be lazy (no judgement being made)..! Jereon's method is the scalpel blade approach (and the most correct). The hammer approach is to simply increase the "isolate" value of the polygon until it doesn't fill in between the pads of your components.
answered Jan 3 at 11:17
awjloganawjlogan
3,42611327
$endgroup$
They are not redundant, it's really the whole point of a polygon pour: to reduce the impedance of the filled area. That said, a lot of people do it to be lazy (no judgement being made)..! Jereon's method is the scalpel blade approach (and the most correct). The hammer approach is to simply increase the "isolate" value of the polygon until it doesn't fill in between the pads of your components.
answered Jan 3 at 11:17
awjloganawjlogan
3,42611327
answered Jan 3 at 11:17
awjloganawjlogan
3,42611327
answered Jan 3 at 11:17
awjloganawjlogan
3,42611327
answered Jan 3 at 11:17
awjloganawjlogan
3,42611327
3,42611327
add a comment |
add a comment |
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f415015%2fhow-do-i-remove-unnecessary-fills-in-an-eagle-polygon%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
Is there a reason why you want to remove this? Why do you mean that they are "unnecessary"?
$endgroup$
– pipe
Jan 3 at 13:44