Mixing
Use of / when using cd
I'm in my home directory on my mac:
$ pwd
/Users/lukas
When I cd around, I do not (and can't) start the path with /:
$ cd Documents/
/Users/lukas/Documents
$ cd /Documents
-bash: cd: /Documents: No such file or directory
Except when I'm in /:
$ pwd
/
$ cd Users
/Users
$ cd /Users
/Users
Why can I use / in front of the path when going from / to /Users but not in any subsequent levels? Is this specific to macOS or is this standard Unix behavior?
linux command-line mac terminal
asked Nov 21 '18 at 4:25
LukasKawerau
17215
|
show 2 more comments
I'm in my home directory on my mac:
$ pwd
/Users/lukas
When I cd around, I do not (and can't) start the path with /:
$ cd Documents/
/Users/lukas/Documents
$ cd /Documents
-bash: cd: /Documents: No such file or directory
Except when I'm in /:
$ pwd
/
$ cd Users
/Users
$ cd /Users
/Users
Why can I use / in front of the path when going from / to /Users but not in any subsequent levels? Is this specific to macOS or is this standard Unix behavior?
linux command-line mac terminal
asked Nov 21 '18 at 4:25
LukasKawerau
17215
11
I think questions about relative and absolute paths have been asked befofre
– adamczi
Nov 21 '18 at 14:20
6
@adamczi It is pretty obvious that OP does not know what a relative path is, or how its syntax is, thus he can't look it up.
– K. Gkinis
Nov 21 '18 at 14:42
12
@K.Gkinis Which is not a reason for not closing as duplicate. It help askers to get good answers (assume answers are good) and answerers to maintain less versions of the same content.
– user202729
Nov 21 '18 at 15:32
9
@K.Gkinis And, in a sense, that is a large part of the point of closing as a duplicate: people will ask questions in lots of different ways, so lots of questions (matching those ways) pointing to a single answer is a Good Thing. In cases like this (where an OP doesn't know the term to search for), closing-as-dupe is not a criticism of them, just the best way of handling the many way people ask questions.
– TripeHound
Nov 21 '18 at 16:27
1
@adamczi They have been asked before (thank you for the links!) but my question and especially the great answers given here are way more detailed and explain the concept better than the answers you linked. Don't know if that matters for closing as duplicate, but might be a consideration.
– LukasKawerau
Nov 22 '18 at 5:16
|
show 2 more comments
I'm in my home directory on my mac:
$ pwd
/Users/lukas
When I cd around, I do not (and can't) start the path with /:
$ cd Documents/
/Users/lukas/Documents
$ cd /Documents
-bash: cd: /Documents: No such file or directory
Except when I'm in /:
$ pwd
/
$ cd Users
/Users
$ cd /Users
/Users
Why can I use / in front of the path when going from / to /Users but not in any subsequent levels? Is this specific to macOS or is this standard Unix behavior?
linux command-line mac terminal
asked Nov 21 '18 at 4:25
LukasKawerau
17215
I'm in my home directory on my mac:
$ pwd
/Users/lukas
When I cd around, I do not (and can't) start the path with /:
$ cd Documents/
/Users/lukas/Documents
$ cd /Documents
-bash: cd: /Documents: No such file or directory
Except when I'm in /:
$ pwd
/
$ cd Users
/Users
$ cd /Users
/Users
Why can I use / in front of the path when going from / to /Users but not in any subsequent levels? Is this specific to macOS or is this standard Unix behavior?
linux command-line mac terminal
linux command-line mac terminal
asked Nov 21 '18 at 4:25
LukasKawerau
17215
asked Nov 21 '18 at 4:25
LukasKawerau
17215
asked Nov 21 '18 at 4:25
LukasKawerau
17215
asked Nov 21 '18 at 4:25
LukasKawerau
17215
asked Nov 21 '18 at 4:25
LukasKawerau
17215
17215
11
I think questions about relative and absolute paths have been asked befofre
– adamczi
Nov 21 '18 at 14:20
6
@adamczi It is pretty obvious that OP does not know what a relative path is, or how its syntax is, thus he can't look it up.
– K. Gkinis
Nov 21 '18 at 14:42
12
@K.Gkinis Which is not a reason for not closing as duplicate. It help askers to get good answers (assume answers are good) and answerers to maintain less versions of the same content.
– user202729
Nov 21 '18 at 15:32
9
@K.Gkinis And, in a sense, that is a large part of the point of closing as a duplicate: people will ask questions in lots of different ways, so lots of questions (matching those ways) pointing to a single answer is a Good Thing. In cases like this (where an OP doesn't know the term to search for), closing-as-dupe is not a criticism of them, just the best way of handling the many way people ask questions.
– TripeHound
Nov 21 '18 at 16:27
1
@adamczi They have been asked before (thank you for the links!) but my question and especially the great answers given here are way more detailed and explain the concept better than the answers you linked. Don't know if that matters for closing as duplicate, but might be a consideration.
– LukasKawerau
Nov 22 '18 at 5:16
|
show 2 more comments
11
I think questions about relative and absolute paths have been asked befofre
– adamczi
Nov 21 '18 at 14:20
6
@adamczi It is pretty obvious that OP does not know what a relative path is, or how its syntax is, thus he can't look it up.
– K. Gkinis
Nov 21 '18 at 14:42
12
@K.Gkinis Which is not a reason for not closing as duplicate. It help askers to get good answers (assume answers are good) and answerers to maintain less versions of the same content.
– user202729
Nov 21 '18 at 15:32
9
@K.Gkinis And, in a sense, that is a large part of the point of closing as a duplicate: people will ask questions in lots of different ways, so lots of questions (matching those ways) pointing to a single answer is a Good Thing. In cases like this (where an OP doesn't know the term to search for), closing-as-dupe is not a criticism of them, just the best way of handling the many way people ask questions.
– TripeHound
Nov 21 '18 at 16:27
1
@adamczi They have been asked before (thank you for the links!) but my question and especially the great answers given here are way more detailed and explain the concept better than the answers you linked. Don't know if that matters for closing as duplicate, but might be a consideration.
– LukasKawerau
Nov 22 '18 at 5:16
11
11
I think questions about relative and absolute paths have been asked befofre
– adamczi
Nov 21 '18 at 14:20
I think questions about relative and absolute paths have been asked befofre
– adamczi
Nov 21 '18 at 14:20
6
6
@adamczi It is pretty obvious that OP does not know what a relative path is, or how its syntax is, thus he can't look it up.
– K. Gkinis
Nov 21 '18 at 14:42
@adamczi It is pretty obvious that OP does not know what a relative path is, or how its syntax is, thus he can't look it up.
– K. Gkinis
Nov 21 '18 at 14:42
12
12
@K.Gkinis Which is not a reason for not closing as duplicate. It help askers to get good answers (assume answers are good) and answerers to maintain less versions of the same content.
– user202729
Nov 21 '18 at 15:32
@K.Gkinis Which is not a reason for not closing as duplicate. It help askers to get good answers (assume answers are good) and answerers to maintain less versions of the same content.
– user202729
Nov 21 '18 at 15:32
9
9
@K.Gkinis And, in a sense, that is a large part of the point of closing as a duplicate: people will ask questions in lots of different ways, so lots of questions (matching those ways) pointing to a single answer is a Good Thing. In cases like this (where an OP doesn't know the term to search for), closing-as-dupe is not a criticism of them, just the best way of handling the many way people ask questions.
– TripeHound
Nov 21 '18 at 16:27
@K.Gkinis And, in a sense, that is a large part of the point of closing as a duplicate: people will ask questions in lots of different ways, so lots of questions (matching those ways) pointing to a single answer is a Good Thing. In cases like this (where an OP doesn't know the term to search for), closing-as-dupe is not a criticism of them, just the best way of handling the many way people ask questions.
– TripeHound
Nov 21 '18 at 16:27
1
1
@adamczi They have been asked before (thank you for the links!) but my question and especially the great answers given here are way more detailed and explain the concept better than the answers you linked. Don't know if that matters for closing as duplicate, but might be a consideration.
– LukasKawerau
Nov 22 '18 at 5:16
@adamczi They have been asked before (thank you for the links!) but my question and especially the great answers given here are way more detailed and explain the concept better than the answers you linked. Don't know if that matters for closing as duplicate, but might be a consideration.
– LukasKawerau
Nov 22 '18 at 5:16
|
show 2 more comments
2 Answers
2
active
oldest
votes
This is standard Unix behaviour.
The / at the beginning of the path represents the root of the disk (or the start/uppermost level of the filesystem tree). As Documents is not off the root, /Documents can't be found.
/Users is off the root directory, so this problem does not occur.
You could use cd /Users/lukas/Documents to change to that path.
Alternatively, you could use relative addressing. Unix based filesystems have 2 special directories:
.which means "this directory",
..which means the parent directory.
If you are in /Users/lukas, cd ./Documents would take you to the correct place.
Let's assume you were in /Users/Lukas/Documents and wanted to go to /Users/Janes/Documents, you could issue a command cd ../../Janes/Documents - using .. would take you back a level - so you would do it twice, before going into the new relative path.
edited Nov 21 '18 at 5:39
Kamil Maciorowski
24.6k155277
answered Nov 21 '18 at 5:03
davidgo
42.7k75289
1
Note: as @davidgo said, when inUsers/lukas,cd Documentscalls for the relative path;cd /Users/Lukas/Documentscalls for the absolute path (which would be working whatever repertory you are in when calling this command).
– Shan-x
Nov 21 '18 at 10:22
1
While the question is about a Mac, which is a Unix system, this is also standard MS-DOS/Windows behavior (replacing/with ``) since DOS borrowed it (through a long, convoluted history) from Unix.
– FreeMan
Nov 21 '18 at 15:26
2
Also depending on the shell you use, cd $HOME/Documents or cd ~/Documents would also work. The shell variable HOME (accessed with $HOME) is the usual storage location for your home directory (~ being a special alias for $HOME).
– pboss3010
Nov 21 '18 at 16:00
add a comment |
/Users/lukas is an "absolute" path. The leading / represents the root directory of your filesystem.
lukas is a "relative" path. As it is not anchored to the root, it means "look for this in the current directory". Unless the current directory is /Users (or some other directory with a lukas in it), this will fail.
So, let's explore your examples, assuming you're in /Users/lukas:
$ cd Documents/
/Users/lukas/Documents
Relative path given => change to the directory "Documents" that's inside /Users/lukas.
$ cd /Documents
-bash: cd: /Documents: No such file or directory
Absolute path given => change to the directory /Documents.
$ pwd
/
This shows that you've now changed the working directory to the root directory, / (though the cd command to do this was not shown).
$ cd Users
/Users
Relative path given => change to the directory "Users" that's inside /.
$ cd /Users
/Users
Absolute path given => change to the directory /Users.
The key each time is that leading /. With it, the path is absolute. Without it, the path is relative. This rule is unambiguous because all absolute paths begin with / (because the root directory is always called /).
Here's some pseudocode loosely describing that algorithm:
MakePathAbsolute(path):
if <path> starts with '/'
return <path>
else
return <current directory>/<path>
The argument you pass to cd goes through this algorithm; the directory you end up changing to is the path that the algorithm returns.
Further reading:
Unix Files and Directories Tutorial
Joseph L. Zachary
"Introduction to Scientific Programming"
answered Nov 21 '18 at 13:36
Lightness Races in Orbit
2,80511427
This is also a great walk-through and really helps in understanding this behavior. Thank you! :)
– LukasKawerau
Nov 22 '18 at 5:08
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1377166%2fuse-of-when-using-cd%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
This is standard Unix behaviour.
The / at the beginning of the path represents the root of the disk (or the start/uppermost level of the filesystem tree). As Documents is not off the root, /Documents can't be found.
/Users is off the root directory, so this problem does not occur.
You could use cd /Users/lukas/Documents to change to that path.
Alternatively, you could use relative addressing. Unix based filesystems have 2 special directories:
.which means "this directory",
..which means the parent directory.
If you are in /Users/lukas, cd ./Documents would take you to the correct place.
Let's assume you were in /Users/Lukas/Documents and wanted to go to /Users/Janes/Documents, you could issue a command cd ../../Janes/Documents - using .. would take you back a level - so you would do it twice, before going into the new relative path.
edited Nov 21 '18 at 5:39
Kamil Maciorowski
24.6k155277
answered Nov 21 '18 at 5:03
davidgo
42.7k75289
1
Note: as @davidgo said, when inUsers/lukas,cd Documentscalls for the relative path;cd /Users/Lukas/Documentscalls for the absolute path (which would be working whatever repertory you are in when calling this command).
– Shan-x
Nov 21 '18 at 10:22
1
While the question is about a Mac, which is a Unix system, this is also standard MS-DOS/Windows behavior (replacing/with ``) since DOS borrowed it (through a long, convoluted history) from Unix.
– FreeMan
Nov 21 '18 at 15:26
2
Also depending on the shell you use, cd $HOME/Documents or cd ~/Documents would also work. The shell variable HOME (accessed with $HOME) is the usual storage location for your home directory (~ being a special alias for $HOME).
– pboss3010
Nov 21 '18 at 16:00
add a comment |
This is standard Unix behaviour.
The / at the beginning of the path represents the root of the disk (or the start/uppermost level of the filesystem tree). As Documents is not off the root, /Documents can't be found.
/Users is off the root directory, so this problem does not occur.
You could use cd /Users/lukas/Documents to change to that path.
Alternatively, you could use relative addressing. Unix based filesystems have 2 special directories:
.which means "this directory",
..which means the parent directory.
If you are in /Users/lukas, cd ./Documents would take you to the correct place.
Let's assume you were in /Users/Lukas/Documents and wanted to go to /Users/Janes/Documents, you could issue a command cd ../../Janes/Documents - using .. would take you back a level - so you would do it twice, before going into the new relative path.
edited Nov 21 '18 at 5:39
Kamil Maciorowski
24.6k155277
answered Nov 21 '18 at 5:03
davidgo
42.7k75289
1
Note: as @davidgo said, when inUsers/lukas,cd Documentscalls for the relative path;cd /Users/Lukas/Documentscalls for the absolute path (which would be working whatever repertory you are in when calling this command).
– Shan-x
Nov 21 '18 at 10:22
1
While the question is about a Mac, which is a Unix system, this is also standard MS-DOS/Windows behavior (replacing/with ``) since DOS borrowed it (through a long, convoluted history) from Unix.
– FreeMan
Nov 21 '18 at 15:26
2
Also depending on the shell you use, cd $HOME/Documents or cd ~/Documents would also work. The shell variable HOME (accessed with $HOME) is the usual storage location for your home directory (~ being a special alias for $HOME).
– pboss3010
Nov 21 '18 at 16:00
add a comment |
This is standard Unix behaviour.
The / at the beginning of the path represents the root of the disk (or the start/uppermost level of the filesystem tree). As Documents is not off the root, /Documents can't be found.
/Users is off the root directory, so this problem does not occur.
You could use cd /Users/lukas/Documents to change to that path.
Alternatively, you could use relative addressing. Unix based filesystems have 2 special directories:
.which means "this directory",
..which means the parent directory.
If you are in /Users/lukas, cd ./Documents would take you to the correct place.
Let's assume you were in /Users/Lukas/Documents and wanted to go to /Users/Janes/Documents, you could issue a command cd ../../Janes/Documents - using .. would take you back a level - so you would do it twice, before going into the new relative path.
edited Nov 21 '18 at 5:39
Kamil Maciorowski
24.6k155277
answered Nov 21 '18 at 5:03
davidgo
42.7k75289
This is standard Unix behaviour.
The / at the beginning of the path represents the root of the disk (or the start/uppermost level of the filesystem tree). As Documents is not off the root, /Documents can't be found.
/Users is off the root directory, so this problem does not occur.
You could use cd /Users/lukas/Documents to change to that path.
Alternatively, you could use relative addressing. Unix based filesystems have 2 special directories:
.which means "this directory",
..which means the parent directory.
If you are in /Users/lukas, cd ./Documents would take you to the correct place.
Let's assume you were in /Users/Lukas/Documents and wanted to go to /Users/Janes/Documents, you could issue a command cd ../../Janes/Documents - using .. would take you back a level - so you would do it twice, before going into the new relative path.
edited Nov 21 '18 at 5:39
Kamil Maciorowski
24.6k155277
answered Nov 21 '18 at 5:03
davidgo
42.7k75289
edited Nov 21 '18 at 5:39
Kamil Maciorowski
24.6k155277
edited Nov 21 '18 at 5:39
Kamil Maciorowski
24.6k155277
edited Nov 21 '18 at 5:39
Kamil Maciorowski
24.6k155277
24.6k155277
answered Nov 21 '18 at 5:03
davidgo
42.7k75289
answered Nov 21 '18 at 5:03
davidgo
42.7k75289
answered Nov 21 '18 at 5:03
davidgo
42.7k75289
42.7k75289
1
Note: as @davidgo said, when inUsers/lukas,cd Documentscalls for the relative path;cd /Users/Lukas/Documentscalls for the absolute path (which would be working whatever repertory you are in when calling this command).
– Shan-x
Nov 21 '18 at 10:22
1
While the question is about a Mac, which is a Unix system, this is also standard MS-DOS/Windows behavior (replacing/with ``) since DOS borrowed it (through a long, convoluted history) from Unix.
– FreeMan
Nov 21 '18 at 15:26
2
Also depending on the shell you use, cd $HOME/Documents or cd ~/Documents would also work. The shell variable HOME (accessed with $HOME) is the usual storage location for your home directory (~ being a special alias for $HOME).
– pboss3010
Nov 21 '18 at 16:00
add a comment |
1
Note: as @davidgo said, when inUsers/lukas,cd Documentscalls for the relative path;cd /Users/Lukas/Documentscalls for the absolute path (which would be working whatever repertory you are in when calling this command).
– Shan-x
Nov 21 '18 at 10:22
1
While the question is about a Mac, which is a Unix system, this is also standard MS-DOS/Windows behavior (replacing/with ``) since DOS borrowed it (through a long, convoluted history) from Unix.
– FreeMan
Nov 21 '18 at 15:26
2
Also depending on the shell you use, cd $HOME/Documents or cd ~/Documents would also work. The shell variable HOME (accessed with $HOME) is the usual storage location for your home directory (~ being a special alias for $HOME).
– pboss3010
Nov 21 '18 at 16:00
1
1
Note: as @davidgo said, when in
Users/lukas, cd Documents calls for the relative path; cd /Users/Lukas/Documents calls for the absolute path (which would be working whatever repertory you are in when calling this command).– Shan-x
Nov 21 '18 at 10:22
Note: as @davidgo said, when in
Users/lukas, cd Documents calls for the relative path; cd /Users/Lukas/Documents calls for the absolute path (which would be working whatever repertory you are in when calling this command).– Shan-x
Nov 21 '18 at 10:22
1
1
While the question is about a Mac, which is a Unix system, this is also standard MS-DOS/Windows behavior (replacing
/ with ``) since DOS borrowed it (through a long, convoluted history) from Unix.– FreeMan
Nov 21 '18 at 15:26
While the question is about a Mac, which is a Unix system, this is also standard MS-DOS/Windows behavior (replacing
/ with ``) since DOS borrowed it (through a long, convoluted history) from Unix.– FreeMan
Nov 21 '18 at 15:26
2
2
Also depending on the shell you use, cd $HOME/Documents or cd ~/Documents would also work. The shell variable HOME (accessed with $HOME) is the usual storage location for your home directory (~ being a special alias for $HOME).
– pboss3010
Nov 21 '18 at 16:00
Also depending on the shell you use, cd $HOME/Documents or cd ~/Documents would also work. The shell variable HOME (accessed with $HOME) is the usual storage location for your home directory (~ being a special alias for $HOME).
– pboss3010
Nov 21 '18 at 16:00
add a comment |
/Users/lukas is an "absolute" path. The leading / represents the root directory of your filesystem.
lukas is a "relative" path. As it is not anchored to the root, it means "look for this in the current directory". Unless the current directory is /Users (or some other directory with a lukas in it), this will fail.
So, let's explore your examples, assuming you're in /Users/lukas:
$ cd Documents/
/Users/lukas/Documents
Relative path given => change to the directory "Documents" that's inside /Users/lukas.
$ cd /Documents
-bash: cd: /Documents: No such file or directory
Absolute path given => change to the directory /Documents.
$ pwd
/
This shows that you've now changed the working directory to the root directory, / (though the cd command to do this was not shown).
$ cd Users
/Users
Relative path given => change to the directory "Users" that's inside /.
$ cd /Users
/Users
Absolute path given => change to the directory /Users.
The key each time is that leading /. With it, the path is absolute. Without it, the path is relative. This rule is unambiguous because all absolute paths begin with / (because the root directory is always called /).
Here's some pseudocode loosely describing that algorithm:
MakePathAbsolute(path):
if <path> starts with '/'
return <path>
else
return <current directory>/<path>
The argument you pass to cd goes through this algorithm; the directory you end up changing to is the path that the algorithm returns.
Further reading:
Unix Files and Directories Tutorial
Joseph L. Zachary
"Introduction to Scientific Programming"
answered Nov 21 '18 at 13:36
Lightness Races in Orbit
2,80511427
This is also a great walk-through and really helps in understanding this behavior. Thank you! :)
– LukasKawerau
Nov 22 '18 at 5:08
add a comment |
/Users/lukas is an "absolute" path. The leading / represents the root directory of your filesystem.
lukas is a "relative" path. As it is not anchored to the root, it means "look for this in the current directory". Unless the current directory is /Users (or some other directory with a lukas in it), this will fail.
So, let's explore your examples, assuming you're in /Users/lukas:
$ cd Documents/
/Users/lukas/Documents
Relative path given => change to the directory "Documents" that's inside /Users/lukas.
$ cd /Documents
-bash: cd: /Documents: No such file or directory
Absolute path given => change to the directory /Documents.
$ pwd
/
This shows that you've now changed the working directory to the root directory, / (though the cd command to do this was not shown).
$ cd Users
/Users
Relative path given => change to the directory "Users" that's inside /.
$ cd /Users
/Users
Absolute path given => change to the directory /Users.
The key each time is that leading /. With it, the path is absolute. Without it, the path is relative. This rule is unambiguous because all absolute paths begin with / (because the root directory is always called /).
Here's some pseudocode loosely describing that algorithm:
MakePathAbsolute(path):
if <path> starts with '/'
return <path>
else
return <current directory>/<path>
The argument you pass to cd goes through this algorithm; the directory you end up changing to is the path that the algorithm returns.
Further reading:
Unix Files and Directories Tutorial
Joseph L. Zachary
"Introduction to Scientific Programming"
answered Nov 21 '18 at 13:36
Lightness Races in Orbit
2,80511427
This is also a great walk-through and really helps in understanding this behavior. Thank you! :)
– LukasKawerau
Nov 22 '18 at 5:08
add a comment |
/Users/lukas is an "absolute" path. The leading / represents the root directory of your filesystem.
lukas is a "relative" path. As it is not anchored to the root, it means "look for this in the current directory". Unless the current directory is /Users (or some other directory with a lukas in it), this will fail.
So, let's explore your examples, assuming you're in /Users/lukas:
$ cd Documents/
/Users/lukas/Documents
Relative path given => change to the directory "Documents" that's inside /Users/lukas.
$ cd /Documents
-bash: cd: /Documents: No such file or directory
Absolute path given => change to the directory /Documents.
$ pwd
/
This shows that you've now changed the working directory to the root directory, / (though the cd command to do this was not shown).
$ cd Users
/Users
Relative path given => change to the directory "Users" that's inside /.
$ cd /Users
/Users
Absolute path given => change to the directory /Users.
The key each time is that leading /. With it, the path is absolute. Without it, the path is relative. This rule is unambiguous because all absolute paths begin with / (because the root directory is always called /).
Here's some pseudocode loosely describing that algorithm:
MakePathAbsolute(path):
if <path> starts with '/'
return <path>
else
return <current directory>/<path>
The argument you pass to cd goes through this algorithm; the directory you end up changing to is the path that the algorithm returns.
Further reading:
Unix Files and Directories Tutorial
Joseph L. Zachary
"Introduction to Scientific Programming"
answered Nov 21 '18 at 13:36
Lightness Races in Orbit
2,80511427
/Users/lukas is an "absolute" path. The leading / represents the root directory of your filesystem.
lukas is a "relative" path. As it is not anchored to the root, it means "look for this in the current directory". Unless the current directory is /Users (or some other directory with a lukas in it), this will fail.
So, let's explore your examples, assuming you're in /Users/lukas:
$ cd Documents/
/Users/lukas/Documents
Relative path given => change to the directory "Documents" that's inside /Users/lukas.
$ cd /Documents
-bash: cd: /Documents: No such file or directory
Absolute path given => change to the directory /Documents.
$ pwd
/
This shows that you've now changed the working directory to the root directory, / (though the cd command to do this was not shown).
$ cd Users
/Users
Relative path given => change to the directory "Users" that's inside /.
$ cd /Users
/Users
Absolute path given => change to the directory /Users.
The key each time is that leading /. With it, the path is absolute. Without it, the path is relative. This rule is unambiguous because all absolute paths begin with / (because the root directory is always called /).
Here's some pseudocode loosely describing that algorithm:
MakePathAbsolute(path):
if <path> starts with '/'
return <path>
else
return <current directory>/<path>
The argument you pass to cd goes through this algorithm; the directory you end up changing to is the path that the algorithm returns.
Further reading:
Unix Files and Directories Tutorial
Joseph L. Zachary
"Introduction to Scientific Programming"
answered Nov 21 '18 at 13:36
Lightness Races in Orbit
2,80511427
answered Nov 21 '18 at 13:36
Lightness Races in Orbit
2,80511427
answered Nov 21 '18 at 13:36
Lightness Races in Orbit
2,80511427
answered Nov 21 '18 at 13:36
Lightness Races in Orbit
2,80511427
2,80511427
This is also a great walk-through and really helps in understanding this behavior. Thank you! :)
– LukasKawerau
Nov 22 '18 at 5:08
add a comment |
This is also a great walk-through and really helps in understanding this behavior. Thank you! :)
– LukasKawerau
Nov 22 '18 at 5:08
This is also a great walk-through and really helps in understanding this behavior. Thank you! :)
– LukasKawerau
Nov 22 '18 at 5:08
This is also a great walk-through and really helps in understanding this behavior. Thank you! :)
– LukasKawerau
Nov 22 '18 at 5:08
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1377166%2fuse-of-when-using-cd%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
11
I think questions about relative and absolute paths have been asked befofre
– adamczi
Nov 21 '18 at 14:20
6
@adamczi It is pretty obvious that OP does not know what a relative path is, or how its syntax is, thus he can't look it up.
– K. Gkinis
Nov 21 '18 at 14:42
12
@K.Gkinis Which is not a reason for not closing as duplicate. It help askers to get good answers (assume answers are good) and answerers to maintain less versions of the same content.
– user202729
Nov 21 '18 at 15:32
9
@K.Gkinis And, in a sense, that is a large part of the point of closing as a duplicate: people will ask questions in lots of different ways, so lots of questions (matching those ways) pointing to a single answer is a Good Thing. In cases like this (where an OP doesn't know the term to search for), closing-as-dupe is not a criticism of them, just the best way of handling the many way people ask questions.
– TripeHound
Nov 21 '18 at 16:27
1
@adamczi They have been asked before (thank you for the links!) but my question and especially the great answers given here are way more detailed and explain the concept better than the answers you linked. Don't know if that matters for closing as duplicate, but might be a consideration.
– LukasKawerau
Nov 22 '18 at 5:16