Mixing
PHP code is not being executed, instead code shows on the page
I'm trying to execute some PHP code on a project (using Dreamweaver) but the code isn't being run.
When I check the source code, the PHP code appears as HTML tags (I can see it in the source code). Apache is running properly (I'm working with XAMPP), the PHP pages are being opened properly but the PHP code isn't being executed.
Does someone have a suggestion about what is happening?
Note: The file is already named as filename.php
Edit:
The Code..:
<?
include_once("/code/configs.php");
?>
php apache
edited Mar 22 '17 at 16:16
Taryn♦
190k46289352
asked Feb 25 '11 at 19:06
GuiGui
3,624103451
|
show 7 more comments
I'm trying to execute some PHP code on a project (using Dreamweaver) but the code isn't being run.
When I check the source code, the PHP code appears as HTML tags (I can see it in the source code). Apache is running properly (I'm working with XAMPP), the PHP pages are being opened properly but the PHP code isn't being executed.
Does someone have a suggestion about what is happening?
Note: The file is already named as filename.php
Edit:
The Code..:
<?
include_once("/code/configs.php");
?>
php apache
edited Mar 22 '17 at 16:16
Taryn♦
190k46289352
asked Feb 25 '11 at 19:06
GuiGui
3,624103451
38
Are you using short tags<?instead of<?php?
– Dan Grossman
Feb 25 '11 at 19:09
2
Yes, i'm using <? ...
– Gui
Feb 25 '11 at 19:12
21
Don't EVER use short tags. (<?). They are deprecated, don't really work in a lot of places, and are otherwise completely unneccessary. Saving three keystrokes is not a valid reason to allow potential for your code to fail on probably half of the servers it may run on.
– mopsyd
Feb 11 '15 at 19:53
6
@mopsyd Where does it say that short tags are deprecated? Please note that short tags are not the same as short echo tags, and short echo tags have been supported by default since PHP 5.4, regardless of theshort_open_tagsetting.
– Kyle Anderson
Mar 15 '16 at 19:23
2
I am aware that short tags are not short echo tags, which is why I specified which I was talking about in the comment. At the time of writing, short tags were flagged for deprecation for the php 6 release, though that has apparently changed since. The problem still exists that a lot of servers have them disabled, which makes your code significantly less portable. This does not apply to short echo tags (<?=), which should run fine on php 5.4+ regardless of server settings.
– mopsyd
Mar 18 '16 at 0:44
|
show 7 more comments
I'm trying to execute some PHP code on a project (using Dreamweaver) but the code isn't being run.
When I check the source code, the PHP code appears as HTML tags (I can see it in the source code). Apache is running properly (I'm working with XAMPP), the PHP pages are being opened properly but the PHP code isn't being executed.
Does someone have a suggestion about what is happening?
Note: The file is already named as filename.php
Edit:
The Code..:
<?
include_once("/code/configs.php");
?>
php apache
edited Mar 22 '17 at 16:16
Taryn♦
190k46289352
asked Feb 25 '11 at 19:06
GuiGui
3,624103451
I'm trying to execute some PHP code on a project (using Dreamweaver) but the code isn't being run.
When I check the source code, the PHP code appears as HTML tags (I can see it in the source code). Apache is running properly (I'm working with XAMPP), the PHP pages are being opened properly but the PHP code isn't being executed.
Does someone have a suggestion about what is happening?
Note: The file is already named as filename.php
Edit:
The Code..:
<?
include_once("/code/configs.php");
?>
php apache
php apache
edited Mar 22 '17 at 16:16
Taryn♦
190k46289352
asked Feb 25 '11 at 19:06
GuiGui
3,624103451
edited Mar 22 '17 at 16:16
Taryn♦
190k46289352
asked Feb 25 '11 at 19:06
GuiGui
3,624103451
edited Mar 22 '17 at 16:16
Taryn♦
190k46289352
edited Mar 22 '17 at 16:16
Taryn♦
190k46289352
edited Mar 22 '17 at 16:16
Taryn♦
190k46289352
190k46289352
asked Feb 25 '11 at 19:06
GuiGui
3,624103451
asked Feb 25 '11 at 19:06
GuiGui
3,624103451
asked Feb 25 '11 at 19:06
GuiGui
3,624103451
3,624103451
38
Are you using short tags<?instead of<?php?
– Dan Grossman
Feb 25 '11 at 19:09
2
Yes, i'm using <? ...
– Gui
Feb 25 '11 at 19:12
21
Don't EVER use short tags. (<?). They are deprecated, don't really work in a lot of places, and are otherwise completely unneccessary. Saving three keystrokes is not a valid reason to allow potential for your code to fail on probably half of the servers it may run on.
– mopsyd
Feb 11 '15 at 19:53
6
@mopsyd Where does it say that short tags are deprecated? Please note that short tags are not the same as short echo tags, and short echo tags have been supported by default since PHP 5.4, regardless of theshort_open_tagsetting.
– Kyle Anderson
Mar 15 '16 at 19:23
2
I am aware that short tags are not short echo tags, which is why I specified which I was talking about in the comment. At the time of writing, short tags were flagged for deprecation for the php 6 release, though that has apparently changed since. The problem still exists that a lot of servers have them disabled, which makes your code significantly less portable. This does not apply to short echo tags (<?=), which should run fine on php 5.4+ regardless of server settings.
– mopsyd
Mar 18 '16 at 0:44
|
show 7 more comments
38
Are you using short tags<?instead of<?php?
– Dan Grossman
Feb 25 '11 at 19:09
2
Yes, i'm using <? ...
– Gui
Feb 25 '11 at 19:12
21
Don't EVER use short tags. (<?). They are deprecated, don't really work in a lot of places, and are otherwise completely unneccessary. Saving three keystrokes is not a valid reason to allow potential for your code to fail on probably half of the servers it may run on.
– mopsyd
Feb 11 '15 at 19:53
6
@mopsyd Where does it say that short tags are deprecated? Please note that short tags are not the same as short echo tags, and short echo tags have been supported by default since PHP 5.4, regardless of theshort_open_tagsetting.
– Kyle Anderson
Mar 15 '16 at 19:23
2
I am aware that short tags are not short echo tags, which is why I specified which I was talking about in the comment. At the time of writing, short tags were flagged for deprecation for the php 6 release, though that has apparently changed since. The problem still exists that a lot of servers have them disabled, which makes your code significantly less portable. This does not apply to short echo tags (<?=), which should run fine on php 5.4+ regardless of server settings.
– mopsyd
Mar 18 '16 at 0:44
38
38
Are you using short tags
<? instead of <?php?– Dan Grossman
Feb 25 '11 at 19:09
Are you using short tags
<? instead of <?php?– Dan Grossman
Feb 25 '11 at 19:09
2
2
Yes, i'm using <? ...
– Gui
Feb 25 '11 at 19:12
Yes, i'm using <? ...
– Gui
Feb 25 '11 at 19:12
21
21
Don't EVER use short tags. (
<? ). They are deprecated, don't really work in a lot of places, and are otherwise completely unneccessary. Saving three keystrokes is not a valid reason to allow potential for your code to fail on probably half of the servers it may run on.– mopsyd
Feb 11 '15 at 19:53
Don't EVER use short tags. (
<? ). They are deprecated, don't really work in a lot of places, and are otherwise completely unneccessary. Saving three keystrokes is not a valid reason to allow potential for your code to fail on probably half of the servers it may run on.– mopsyd
Feb 11 '15 at 19:53
6
6
@mopsyd Where does it say that short tags are deprecated? Please note that short tags are not the same as short echo tags, and short echo tags have been supported by default since PHP 5.4, regardless of the
short_open_tag setting.– Kyle Anderson
Mar 15 '16 at 19:23
@mopsyd Where does it say that short tags are deprecated? Please note that short tags are not the same as short echo tags, and short echo tags have been supported by default since PHP 5.4, regardless of the
short_open_tag setting.– Kyle Anderson
Mar 15 '16 at 19:23
2
2
I am aware that short tags are not short echo tags, which is why I specified which I was talking about in the comment. At the time of writing, short tags were flagged for deprecation for the php 6 release, though that has apparently changed since. The problem still exists that a lot of servers have them disabled, which makes your code significantly less portable. This does not apply to short echo tags (
<?=), which should run fine on php 5.4+ regardless of server settings.– mopsyd
Mar 18 '16 at 0:44
I am aware that short tags are not short echo tags, which is why I specified which I was talking about in the comment. At the time of writing, short tags were flagged for deprecation for the php 6 release, though that has apparently changed since. The problem still exists that a lot of servers have them disabled, which makes your code significantly less portable. This does not apply to short echo tags (
<?=), which should run fine on php 5.4+ regardless of server settings.– mopsyd
Mar 18 '16 at 0:44
|
show 7 more comments
24 Answers
24
active
oldest
votes
Sounds like there is something wrong with your configuration, here are a few things you can check:
Make sure that PHP is installed and running correctly. This may sound silly, but you never know. An easy way to check is to run
php -vfrom a command line and see if returns version information or any errors.Make sure that the PHP module is listed and uncommented inside of your Apache's httpd.conf This should be something like
LoadModule php5_module "c:/php/php5apache2_2.dll"in the file. Search forLoadModule php, and make sure that there is no comment (;) in front of it.Make sure that Apache's httpd.conf file has the PHP MIME type in it. This should be something like
AddType application/x-httpd-php .php. This tells Apache to run.phpfiles as PHP. Search for AddType, and then make sure there is an entry for PHP, and that it is uncommented.Make sure your file has the
.phpextension on it, or whichever extension specified in the MIME definition in point #3, otherwise it will not be executed as PHP.Make sure you are not using short tags in the PHP file (
<?), these are not enabled on all servers by default and their use is discouraged. Use<?phpinstead (or enable short tags in your php.ini withshort_open_tag=Onif you have code that relies on them).Make sure you are accessing your file over your webserver using an URL like
http://localhost/file.phpnot via local file accessfile://localhost/www/file.php
And lastly check the PHP manual for further setup tips.
edited Nov 13 '17 at 11:44
Quentin
644k718671037
answered Feb 25 '11 at 19:15
shmeepsshmeeps
5,84922132
12
Don't know why, but installer of PHP 5.3.15 doesn't add the lineAddType application/x-httpd-php .php. Thanks a lot!!
– MatuDuke
Jul 25 '12 at 2:03
7
@shmeeps: Where have you seen that short tags are deprecated? I've done some searching and can only find recommendations against them, nothing about deprecation. Granted for applications which are to be distributed it is better to use <?php in case the hosting server doesn't have them enabled, but for apps where you have full control over the server they're going to be on I don't see any reason not to use them.
– ClarkeyBoy
Oct 28 '13 at 16:35
3
point no 6 worked for me.. local access doesn't use the apache server
– KawaiKx
Jul 6 '14 at 15:24
5
point 2 worked for me the safe way -apt-get purge apache2; apt-get install apache2 libapache-mod-php5
– ulkas
Sep 16 '14 at 20:41
1
@full_prog_full Try uploading a file with a.phpextension with the contents<?php echo("Success"); ?>and see if accessing the file through a web browser results in "Success" being displayed without the associated PHP code.
– shmeeps
Apr 18 '16 at 3:29
|
show 12 more comments
php7 :
sudo a2enmod proxy_fcgi setenvif
sudo a2enconf php7.0-fpm
sudo service apache2 restart
answered Feb 6 '17 at 15:06
sj59sj59
92511120
10
While this code snippet may solve the question, including an explanation of how and why this solves the problem would really help to improve the quality of your post. Remember that you are answering the question for readers in the future, not just the person asking now! Please edit your answer to add explanation, and give an indication of what limitations and assumptions apply.
– Toby Speight
Feb 6 '17 at 18:31
2
This answer is linux related the topicstarter is clearly using windows.
– Raymond Nijland
Apr 24 '17 at 11:53
1
@RaymondNijland true but this is canonical and I found this question and it saved me after over an hour of troubleshooting.
– Goose
May 5 '17 at 20:57
How and Why: This happens when PHP7 doesn't configure the default fast-CGI service in the make script.sudo a2enmod proxy_fcgi setenvifcreates three new mods/mods-available/proxy.conf proxy_fcgi.load proxy.loadLikewise,sudo a2enconf php7.0-fpmcreates a config file/conf-available/php7.0-fpm.confOnce this is done and Apache2 can then run the PHP7 module as a fast-CGI service.
– Talvi Watia
Nov 21 '17 at 12:49
1
worked for linux mint
– zzapper
Jan 20 '18 at 23:41
add a comment |
I'm running Apache on Ubuntu and my issue was that the /etc/apache2/mods-available/php5.conf file was missing this:
<FilesMatch ".+.ph(p[345]?|t|tml)$">
SetHandler application/x-httpd-php
</FilesMatch>
I added it back in and php was parsing php files correctly.
edited Mar 21 '16 at 14:37
Flow
19.1k1179124
answered Mar 19 '13 at 13:34
Matt McDonaldMatt McDonald
41065
add a comment |
note for php 7 users, add this to your httpd.conf file:
# PHP 7 specific configuration
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
answered Aug 15 '16 at 9:32
EdCEdC
75868
Just to help other people with this issue. Thehttpd.conffile is located in/etc/apache2/httpd.confIf you're using Ubuntu, it would beapache2.confin the same directory that needs to be modified for PHP7.
– Ahmed Sagarwala
Aug 14 '18 at 19:07
add a comment |
I found another problem causing this issue and already solved it. I accidentally saved my script in UTF-16 encoding. It seems that PHP5 can't recognize <?php tag in 16 bit encoding by default.
answered Apr 4 '13 at 18:17
ArrviArrvi
389312
add a comment |
I'm posting this answer because my Virtualmin/Webmin admin interface decided it was a good idea to disable my PHP engine.. took me a while to find the solution, so I thought I'd share it with you guys:
Also, be sure to check that none of your website config files related to this specific host or virtualhost have any php_admin_value's in them that turn off PHP, like this:
php_admin_value engine Off
When in doubt, comment it...
# php_admin_value engine Off
And restart your webserver.
answered Oct 15 '13 at 17:58
Henry van MegenHenry van Megen
1,19521530
Where are these config settings exactly?
– cronoklee
Jul 27 '16 at 14:43
2
@cronoklee In vHost settings of httpd.conf. For existing hosts, you need to edit apache config in webmin. For future hosts, go to virtualmin > server template > apache website. Eitherway, this is not as secure as fastcgi - virtualmin's default. So the correct approach should be to troubleshoot why fcgi doesn't work, for example it may be caused by file permissions.
– Sheepy
Sep 9 '16 at 3:43
If you're using a version of Apache that doesn't have httpd.conf, look in/etc/apache2/mods-enabled/php7.conforphp5.conf
– LXXIII
Oct 20 '16 at 22:53
When in doubt about the location of a certain configuration setting, you can always use grep to find what you're looking for by (for example in this case) typing:sudo grep php_admin_value /etc/* -R
– Henry van Megen
May 23 '18 at 11:05
add a comment |
You're just opening your php file into browser. You have to open it using localhost url. if you open a file directly from your directory it will not execute the php code in any case.
use: http://locahost/index.php or http:127.0.0.1/index.php
Enable php short code. In your case, you are using <? which is php short code for <?php. By default php short codes are disabled.
Also use: sudo apt-get install php5 libapache2-mod-php5 php5-mcrypt if you are a ubuntu user.
edited Jan 3 at 16:35
isherwood
36.9k1082111
answered Dec 6 '16 at 13:36
Hasan BaigHasan Baig
350514
1
Why is mcrypt required when i'm just including a file? You should noticed that this question is old and the short tags issue was mentioned 16 times, also in the top comment of my question.
– Gui
Dec 6 '16 at 16:20
1
I just share my solution, I was also facing the same error and after executing this command of mcrypt my issue solved. you may also try.
– Hasan Baig
Dec 7 '16 at 7:43
by default php short codes are enabled. short_open_tag=On (Default Value=ON) in php 5.6
– zond
Jan 26 '17 at 13:38
This was my problem, my virtualmin/apache configuration was for 127.0.0.2 but i was putting my external ip address in the browser, i just updated my v/a config and now its working
– Hayden Thring
Jan 15 at 20:14
add a comment |
I know it should sound silly... but seldom it happens.
Check if you are trying to execute php from
**http://localhost/info.php**
and not from
file:///var/www/info.php
ps> you can notice that if you write from shell
php info.php
it answer with the code (it means php functions)..
answered Jan 31 '14 at 11:15
user3257072user3257072
8111
PHP works fine (checked using command line). but, when I access the file using URL, it shows PHP code.
– muaaz
Jun 17 '15 at 8:08
add a comment |
This just happened to me again, along with the server downloading html files, rather than processing. I had not use the webserver apache for some time on the computer and meanwhile Ubuntu updated like two more versions from originally installed LTS. Now it is
$ cat /etc/issue
Ubuntu 16.04 LTS
So the php worked after like so:
$ sudo apt-get install lamp-server^
$ sudo a2enmod php7.0
$ sudo service apache2 restart
The webserver was now parsing the php. Maybe now got to update some webs since php7.0 now running where as it was before running php5. Oh well.
answered Jun 12 '16 at 11:04
ndasusersndasusers
599412
you just reinstalled entire server..
– RozzA
May 10 '17 at 21:38
add a comment |
I've solved this by uninstalling XAMPP, and installing WAMP.
Thanks for the help.
edited Jun 18 '15 at 12:40
Dummy00001
12.3k22454
answered Feb 25 '11 at 19:38
GuiGui
3,624103451
add a comment |
i had similar problem but in my case solution was different.
my file that held php code was called "somename.html"
changed it to "somename.php" worked fine
answered Mar 20 '16 at 17:59
NetrusNetrus
6110
This also solved it for me. Does anyone know if the sever will execute php in a .html file or does the file ending always have to be changed to .php when there's a line of php to be executed?
– full_prog_full
Nov 10 '16 at 14:42
depends upon the server settings, for most cases php code that existing in anyfile.html will execute. and if it does not, it can be changed, although idk how :P
– Netrus
Dec 4 '16 at 16:49
add a comment |
on my ubuntu 14.04, apache 2.4, php 5.5.9 install, I tried with a sample.php on /var/www/html (default document root) and it worked ok.
So the problem was on my Virtual Servers config.
The solution was to include, on the Directory def containing the .php, this line:
php_admin_flag engine on
answered Mar 28 '16 at 19:16
RogelioRogelio
1,0761812
and where should I add this line in Apache file in httpd.conf of my virtual server? and I am using Webmin
– suresh pareek
Aug 21 '17 at 12:45
add a comment |
This was in my .htaccess
DirectoryIndex index.html index.htm
index.html contained PHP code. By default, PHP won't process files with extentions like htm* as PHP code.
You can override this, by adding the following to .htaccess:
<FilesMatch ".+.html$">
SetHandler application/x-httpd-php
</FilesMatch>
answered Dec 4 '16 at 13:40
JahmicJahmic
6,41574755
add a comment |
For fresh setup of LAMP running php 7
edit the file /etc/httpd/conf/httpd.conf
Note: make sure to make backup for it before changing anything.
Paste this at the very bottom of the file:
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
Then, search for LoadModule and paste the following line:
LoadModule php7_module modules/libphp7.so
This line will simply ask httpd to load the php 7 module
Then restart httpd
answered Jun 16 '17 at 3:03
Eric LibayEric Libay
516
add a comment |
Check all the packages you have installed for php using:
yum list installed | grep remi
Install all relevant php packages, especially php-devel on your machine.
edited Apr 11 '18 at 8:45
Jai Kumar Rajput
2,12612242
answered Dec 4 '13 at 23:34
Chaitanya ShivadeChaitanya Shivade
562411
add a comment |
I faced this issue on php 7.1 that comes with High Sierra (OS X 10.13.5), editing /etc/apache2/httpd.conf with following changes helped:
Uncomment this line
LoadModule php7_module libexec/apache2/libphp7.so
Paste following at the end
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
answered Jun 8 '18 at 16:49
AamirRAamirR
4,00912434
Like same can you pls suggest Wamp 3 version same error. There is no /etc/apache2/httpd.conf folder path in wamp 3. @AamirR
– Gem
Jan 9 at 7:00
Are you using an extension other the.phpfor code file? if so rename it to be .php and check, also check if you code is having short_open_tags<?, if so try changing to<?php
– AamirR
Jan 9 at 8:46
add a comment |
I think the problem that it is showing code instead of the result is that it is not going to local host . recheck what address u r going in. are u going to a local file directory or to the local host.
from the screenshot u sent it is going to ur computer not to the localhost.
"file:/// " it should be "localhost/"
answered May 27 '16 at 1:02
NavNav
419
add a comment |
Reinstalling the mcrypt module worked for me.
$sudo apt-get install php5-mcrypt
$sudo php5enmod mcrypt
answered Oct 17 '16 at 5:46
b.gb.g
1031111
It honestly did, maybe because I hadn't configured the PHP properly on my system.But, since the question I asked regarding the same issue has been marked as a duplicate to this question, I only could answer it here. I wonder why the down vote.
– b.g
Oct 17 '16 at 13:06
This answer is linux related the topicstarter is clearly using windows
– Raymond Nijland
Apr 24 '17 at 11:55
add a comment |
I had a case that I accidentally started untaring my files directory in root. It added the .htaccess file from my files folder that would block all php
# If we know how to do it safely, disable the PHP engine entirely.
<IfModule mod_php5.c>
php_flag engine off
</IfModule>
Bottom line check the .htaccess file on root.
answered Dec 2 '16 at 23:01
albertskialbertski
998827
add a comment |
If you have configuration like this:
<VirtualHost *:80>
ServerName example.com
DocumentRoot "/var/www/example.com"
<FilesMatch ".php$">
SetHandler "proxy:fcgi://127.0.0.1:9000"
</FilesMatch>
</VirtualHost>
Uncomment next lines in your httpd.conf
LoadModule proxy_module lib/httpd/modules/mod_proxy.so
LoadModule proxy_fcgi_module lib/httpd/modules/mod_proxy_fcgi.so
It works for me
answered Feb 27 '18 at 14:21
user3890355user3890355
46579
add a comment |
Add AddType application/x-httpd-php .php to your httpd.conf file if you are using Apache 2.4
answered May 4 '18 at 13:56
AshahmaliAshahmali
837
add a comment |
Make sure the script contains
<?php
before the code that should be executed. There should be no space between <? and php in this.
answered Jun 1 '18 at 4:42
BarmarBarmar
424k35248349
add a comment |
Just spent hours of trying to get PHP 5 to run with Apache 2.4 on Windows 10. Finally for me it was a typo in httpd.conf LoadModule. Drew attention to writing and exact module path through the last answer in this apachelounge thread of denny2018. Thank you!
After two nights I discovered... My directory was written
c:(lower case)
I had LoadModule php5_module "c:/php/php5apache2.dll" but correct for apache 2.4 is:
LoadModule php5_module "C:/php/php5apache2_4.dll"
So I also missed the _4 before (for apache 2.4). The full snippet that worked for me:
# PHP
LoadModule php5_module "C:/php/php5apache2_4.dll"
AddHandler application/x-httpd-php .php
<FilesMatch .php$>
SetHandler application/x-httpd-php
</FilesMatch>
Just tried PHP 7. There the LoadModule line in httpd.conf for Apache 2.4 reads
LoadModule php7_module "C:/php/php7apache2_4.dll"
Currently php manual shows up c:/php/php5apache2.dll which of course needs to be adjusted.
answered Sep 6 '18 at 14:36
bobble bubblebobble bubble
6,30511428
add a comment |
in my case (Apache/2.4.34),
after uncommenting the specific module
"LoadModule php7_module libexec/apache2/libphp7.so"
from
"/etc/apache2/httpd.conf"
my problem was gone.
answered Oct 3 '18 at 4:49
sh6210sh6210
80369
add a comment |
24 Answers
24
active
oldest
votes
24 Answers
24
active
oldest
votes
active
oldest
votes
active
oldest
votes
Sounds like there is something wrong with your configuration, here are a few things you can check:
Make sure that PHP is installed and running correctly. This may sound silly, but you never know. An easy way to check is to run
php -vfrom a command line and see if returns version information or any errors.Make sure that the PHP module is listed and uncommented inside of your Apache's httpd.conf This should be something like
LoadModule php5_module "c:/php/php5apache2_2.dll"in the file. Search forLoadModule php, and make sure that there is no comment (;) in front of it.Make sure that Apache's httpd.conf file has the PHP MIME type in it. This should be something like
AddType application/x-httpd-php .php. This tells Apache to run.phpfiles as PHP. Search for AddType, and then make sure there is an entry for PHP, and that it is uncommented.Make sure your file has the
.phpextension on it, or whichever extension specified in the MIME definition in point #3, otherwise it will not be executed as PHP.Make sure you are not using short tags in the PHP file (
<?), these are not enabled on all servers by default and their use is discouraged. Use<?phpinstead (or enable short tags in your php.ini withshort_open_tag=Onif you have code that relies on them).Make sure you are accessing your file over your webserver using an URL like
http://localhost/file.phpnot via local file accessfile://localhost/www/file.php
And lastly check the PHP manual for further setup tips.
edited Nov 13 '17 at 11:44
Quentin
644k718671037
answered Feb 25 '11 at 19:15
shmeepsshmeeps
5,84922132
12
Don't know why, but installer of PHP 5.3.15 doesn't add the lineAddType application/x-httpd-php .php. Thanks a lot!!
– MatuDuke
Jul 25 '12 at 2:03
7
@shmeeps: Where have you seen that short tags are deprecated? I've done some searching and can only find recommendations against them, nothing about deprecation. Granted for applications which are to be distributed it is better to use <?php in case the hosting server doesn't have them enabled, but for apps where you have full control over the server they're going to be on I don't see any reason not to use them.
– ClarkeyBoy
Oct 28 '13 at 16:35
3
point no 6 worked for me.. local access doesn't use the apache server
– KawaiKx
Jul 6 '14 at 15:24
5
point 2 worked for me the safe way -apt-get purge apache2; apt-get install apache2 libapache-mod-php5
– ulkas
Sep 16 '14 at 20:41
1
@full_prog_full Try uploading a file with a.phpextension with the contents<?php echo("Success"); ?>and see if accessing the file through a web browser results in "Success" being displayed without the associated PHP code.
– shmeeps
Apr 18 '16 at 3:29
|
show 12 more comments
Sounds like there is something wrong with your configuration, here are a few things you can check:
Make sure that PHP is installed and running correctly. This may sound silly, but you never know. An easy way to check is to run
php -vfrom a command line and see if returns version information or any errors.Make sure that the PHP module is listed and uncommented inside of your Apache's httpd.conf This should be something like
LoadModule php5_module "c:/php/php5apache2_2.dll"in the file. Search forLoadModule php, and make sure that there is no comment (;) in front of it.Make sure that Apache's httpd.conf file has the PHP MIME type in it. This should be something like
AddType application/x-httpd-php .php. This tells Apache to run.phpfiles as PHP. Search for AddType, and then make sure there is an entry for PHP, and that it is uncommented.Make sure your file has the
.phpextension on it, or whichever extension specified in the MIME definition in point #3, otherwise it will not be executed as PHP.Make sure you are not using short tags in the PHP file (
<?), these are not enabled on all servers by default and their use is discouraged. Use<?phpinstead (or enable short tags in your php.ini withshort_open_tag=Onif you have code that relies on them).Make sure you are accessing your file over your webserver using an URL like
http://localhost/file.phpnot via local file accessfile://localhost/www/file.php
And lastly check the PHP manual for further setup tips.
edited Nov 13 '17 at 11:44
Quentin
644k718671037
answered Feb 25 '11 at 19:15
shmeepsshmeeps
5,84922132
12
Don't know why, but installer of PHP 5.3.15 doesn't add the lineAddType application/x-httpd-php .php. Thanks a lot!!
– MatuDuke
Jul 25 '12 at 2:03
7
@shmeeps: Where have you seen that short tags are deprecated? I've done some searching and can only find recommendations against them, nothing about deprecation. Granted for applications which are to be distributed it is better to use <?php in case the hosting server doesn't have them enabled, but for apps where you have full control over the server they're going to be on I don't see any reason not to use them.
– ClarkeyBoy
Oct 28 '13 at 16:35
3
point no 6 worked for me.. local access doesn't use the apache server
– KawaiKx
Jul 6 '14 at 15:24
5
point 2 worked for me the safe way -apt-get purge apache2; apt-get install apache2 libapache-mod-php5
– ulkas
Sep 16 '14 at 20:41
1
@full_prog_full Try uploading a file with a.phpextension with the contents<?php echo("Success"); ?>and see if accessing the file through a web browser results in "Success" being displayed without the associated PHP code.
– shmeeps
Apr 18 '16 at 3:29
|
show 12 more comments
Sounds like there is something wrong with your configuration, here are a few things you can check:
Make sure that PHP is installed and running correctly. This may sound silly, but you never know. An easy way to check is to run
php -vfrom a command line and see if returns version information or any errors.Make sure that the PHP module is listed and uncommented inside of your Apache's httpd.conf This should be something like
LoadModule php5_module "c:/php/php5apache2_2.dll"in the file. Search forLoadModule php, and make sure that there is no comment (;) in front of it.Make sure that Apache's httpd.conf file has the PHP MIME type in it. This should be something like
AddType application/x-httpd-php .php. This tells Apache to run.phpfiles as PHP. Search for AddType, and then make sure there is an entry for PHP, and that it is uncommented.Make sure your file has the
.phpextension on it, or whichever extension specified in the MIME definition in point #3, otherwise it will not be executed as PHP.Make sure you are not using short tags in the PHP file (
<?), these are not enabled on all servers by default and their use is discouraged. Use<?phpinstead (or enable short tags in your php.ini withshort_open_tag=Onif you have code that relies on them).Make sure you are accessing your file over your webserver using an URL like
http://localhost/file.phpnot via local file accessfile://localhost/www/file.php
And lastly check the PHP manual for further setup tips.
edited Nov 13 '17 at 11:44
Quentin
644k718671037
answered Feb 25 '11 at 19:15
shmeepsshmeeps
5,84922132
Sounds like there is something wrong with your configuration, here are a few things you can check:
Make sure that PHP is installed and running correctly. This may sound silly, but you never know. An easy way to check is to run
php -vfrom a command line and see if returns version information or any errors.Make sure that the PHP module is listed and uncommented inside of your Apache's httpd.conf This should be something like
LoadModule php5_module "c:/php/php5apache2_2.dll"in the file. Search forLoadModule php, and make sure that there is no comment (;) in front of it.Make sure that Apache's httpd.conf file has the PHP MIME type in it. This should be something like
AddType application/x-httpd-php .php. This tells Apache to run.phpfiles as PHP. Search for AddType, and then make sure there is an entry for PHP, and that it is uncommented.Make sure your file has the
.phpextension on it, or whichever extension specified in the MIME definition in point #3, otherwise it will not be executed as PHP.Make sure you are not using short tags in the PHP file (
<?), these are not enabled on all servers by default and their use is discouraged. Use<?phpinstead (or enable short tags in your php.ini withshort_open_tag=Onif you have code that relies on them).Make sure you are accessing your file over your webserver using an URL like
http://localhost/file.phpnot via local file accessfile://localhost/www/file.php
And lastly check the PHP manual for further setup tips.
edited Nov 13 '17 at 11:44
Quentin
644k718671037
answered Feb 25 '11 at 19:15
shmeepsshmeeps
5,84922132
edited Nov 13 '17 at 11:44
Quentin
644k718671037
edited Nov 13 '17 at 11:44
Quentin
644k718671037
edited Nov 13 '17 at 11:44
Quentin
644k718671037
644k718671037
answered Feb 25 '11 at 19:15
shmeepsshmeeps
5,84922132
answered Feb 25 '11 at 19:15
shmeepsshmeeps
5,84922132
answered Feb 25 '11 at 19:15
shmeepsshmeeps
5,84922132
5,84922132
12
Don't know why, but installer of PHP 5.3.15 doesn't add the lineAddType application/x-httpd-php .php. Thanks a lot!!
– MatuDuke
Jul 25 '12 at 2:03
7
@shmeeps: Where have you seen that short tags are deprecated? I've done some searching and can only find recommendations against them, nothing about deprecation. Granted for applications which are to be distributed it is better to use <?php in case the hosting server doesn't have them enabled, but for apps where you have full control over the server they're going to be on I don't see any reason not to use them.
– ClarkeyBoy
Oct 28 '13 at 16:35
3
point no 6 worked for me.. local access doesn't use the apache server
– KawaiKx
Jul 6 '14 at 15:24
5
point 2 worked for me the safe way -apt-get purge apache2; apt-get install apache2 libapache-mod-php5
– ulkas
Sep 16 '14 at 20:41
1
@full_prog_full Try uploading a file with a.phpextension with the contents<?php echo("Success"); ?>and see if accessing the file through a web browser results in "Success" being displayed without the associated PHP code.
– shmeeps
Apr 18 '16 at 3:29
|
show 12 more comments
12
Don't know why, but installer of PHP 5.3.15 doesn't add the lineAddType application/x-httpd-php .php. Thanks a lot!!
– MatuDuke
Jul 25 '12 at 2:03
7
@shmeeps: Where have you seen that short tags are deprecated? I've done some searching and can only find recommendations against them, nothing about deprecation. Granted for applications which are to be distributed it is better to use <?php in case the hosting server doesn't have them enabled, but for apps where you have full control over the server they're going to be on I don't see any reason not to use them.
– ClarkeyBoy
Oct 28 '13 at 16:35
3
point no 6 worked for me.. local access doesn't use the apache server
– KawaiKx
Jul 6 '14 at 15:24
5
point 2 worked for me the safe way -apt-get purge apache2; apt-get install apache2 libapache-mod-php5
– ulkas
Sep 16 '14 at 20:41
1
@full_prog_full Try uploading a file with a.phpextension with the contents<?php echo("Success"); ?>and see if accessing the file through a web browser results in "Success" being displayed without the associated PHP code.
– shmeeps
Apr 18 '16 at 3:29
12
12
Don't know why, but installer of PHP 5.3.15 doesn't add the line
AddType application/x-httpd-php .php. Thanks a lot!!– MatuDuke
Jul 25 '12 at 2:03
Don't know why, but installer of PHP 5.3.15 doesn't add the line
AddType application/x-httpd-php .php. Thanks a lot!!– MatuDuke
Jul 25 '12 at 2:03
7
7
@shmeeps: Where have you seen that short tags are deprecated? I've done some searching and can only find recommendations against them, nothing about deprecation. Granted for applications which are to be distributed it is better to use <?php in case the hosting server doesn't have them enabled, but for apps where you have full control over the server they're going to be on I don't see any reason not to use them.
– ClarkeyBoy
Oct 28 '13 at 16:35
@shmeeps: Where have you seen that short tags are deprecated? I've done some searching and can only find recommendations against them, nothing about deprecation. Granted for applications which are to be distributed it is better to use <?php in case the hosting server doesn't have them enabled, but for apps where you have full control over the server they're going to be on I don't see any reason not to use them.
– ClarkeyBoy
Oct 28 '13 at 16:35
3
3
point no 6 worked for me.. local access doesn't use the apache server
– KawaiKx
Jul 6 '14 at 15:24
point no 6 worked for me.. local access doesn't use the apache server
– KawaiKx
Jul 6 '14 at 15:24
5
5
point 2 worked for me the safe way -
apt-get purge apache2; apt-get install apache2 libapache-mod-php5– ulkas
Sep 16 '14 at 20:41
point 2 worked for me the safe way -
apt-get purge apache2; apt-get install apache2 libapache-mod-php5– ulkas
Sep 16 '14 at 20:41
1
1
@full_prog_full Try uploading a file with a
.php extension with the contents <?php echo("Success"); ?> and see if accessing the file through a web browser results in "Success" being displayed without the associated PHP code.– shmeeps
Apr 18 '16 at 3:29
@full_prog_full Try uploading a file with a
.php extension with the contents <?php echo("Success"); ?> and see if accessing the file through a web browser results in "Success" being displayed without the associated PHP code.– shmeeps
Apr 18 '16 at 3:29
|
show 12 more comments
php7 :
sudo a2enmod proxy_fcgi setenvif
sudo a2enconf php7.0-fpm
sudo service apache2 restart
answered Feb 6 '17 at 15:06
sj59sj59
92511120
10
While this code snippet may solve the question, including an explanation of how and why this solves the problem would really help to improve the quality of your post. Remember that you are answering the question for readers in the future, not just the person asking now! Please edit your answer to add explanation, and give an indication of what limitations and assumptions apply.
– Toby Speight
Feb 6 '17 at 18:31
2
This answer is linux related the topicstarter is clearly using windows.
– Raymond Nijland
Apr 24 '17 at 11:53
1
@RaymondNijland true but this is canonical and I found this question and it saved me after over an hour of troubleshooting.
– Goose
May 5 '17 at 20:57
How and Why: This happens when PHP7 doesn't configure the default fast-CGI service in the make script.sudo a2enmod proxy_fcgi setenvifcreates three new mods/mods-available/proxy.conf proxy_fcgi.load proxy.loadLikewise,sudo a2enconf php7.0-fpmcreates a config file/conf-available/php7.0-fpm.confOnce this is done and Apache2 can then run the PHP7 module as a fast-CGI service.
– Talvi Watia
Nov 21 '17 at 12:49
1
worked for linux mint
– zzapper
Jan 20 '18 at 23:41
add a comment |
php7 :
sudo a2enmod proxy_fcgi setenvif
sudo a2enconf php7.0-fpm
sudo service apache2 restart
answered Feb 6 '17 at 15:06
sj59sj59
92511120
10
While this code snippet may solve the question, including an explanation of how and why this solves the problem would really help to improve the quality of your post. Remember that you are answering the question for readers in the future, not just the person asking now! Please edit your answer to add explanation, and give an indication of what limitations and assumptions apply.
– Toby Speight
Feb 6 '17 at 18:31
2
This answer is linux related the topicstarter is clearly using windows.
– Raymond Nijland
Apr 24 '17 at 11:53
1
@RaymondNijland true but this is canonical and I found this question and it saved me after over an hour of troubleshooting.
– Goose
May 5 '17 at 20:57
How and Why: This happens when PHP7 doesn't configure the default fast-CGI service in the make script.sudo a2enmod proxy_fcgi setenvifcreates three new mods/mods-available/proxy.conf proxy_fcgi.load proxy.loadLikewise,sudo a2enconf php7.0-fpmcreates a config file/conf-available/php7.0-fpm.confOnce this is done and Apache2 can then run the PHP7 module as a fast-CGI service.
– Talvi Watia
Nov 21 '17 at 12:49
1
worked for linux mint
– zzapper
Jan 20 '18 at 23:41
add a comment |
php7 :
sudo a2enmod proxy_fcgi setenvif
sudo a2enconf php7.0-fpm
sudo service apache2 restart
answered Feb 6 '17 at 15:06
sj59sj59
92511120
php7 :
sudo a2enmod proxy_fcgi setenvif
sudo a2enconf php7.0-fpm
sudo service apache2 restart
answered Feb 6 '17 at 15:06
sj59sj59
92511120
answered Feb 6 '17 at 15:06
sj59sj59
92511120
answered Feb 6 '17 at 15:06
sj59sj59
92511120
answered Feb 6 '17 at 15:06
sj59sj59
92511120
92511120
10
While this code snippet may solve the question, including an explanation of how and why this solves the problem would really help to improve the quality of your post. Remember that you are answering the question for readers in the future, not just the person asking now! Please edit your answer to add explanation, and give an indication of what limitations and assumptions apply.
– Toby Speight
Feb 6 '17 at 18:31
2
This answer is linux related the topicstarter is clearly using windows.
– Raymond Nijland
Apr 24 '17 at 11:53
1
@RaymondNijland true but this is canonical and I found this question and it saved me after over an hour of troubleshooting.
– Goose
May 5 '17 at 20:57
How and Why: This happens when PHP7 doesn't configure the default fast-CGI service in the make script.sudo a2enmod proxy_fcgi setenvifcreates three new mods/mods-available/proxy.conf proxy_fcgi.load proxy.loadLikewise,sudo a2enconf php7.0-fpmcreates a config file/conf-available/php7.0-fpm.confOnce this is done and Apache2 can then run the PHP7 module as a fast-CGI service.
– Talvi Watia
Nov 21 '17 at 12:49
1
worked for linux mint
– zzapper
Jan 20 '18 at 23:41
add a comment |
10
While this code snippet may solve the question, including an explanation of how and why this solves the problem would really help to improve the quality of your post. Remember that you are answering the question for readers in the future, not just the person asking now! Please edit your answer to add explanation, and give an indication of what limitations and assumptions apply.
– Toby Speight
Feb 6 '17 at 18:31
2
This answer is linux related the topicstarter is clearly using windows.
– Raymond Nijland
Apr 24 '17 at 11:53
1
@RaymondNijland true but this is canonical and I found this question and it saved me after over an hour of troubleshooting.
– Goose
May 5 '17 at 20:57
How and Why: This happens when PHP7 doesn't configure the default fast-CGI service in the make script.sudo a2enmod proxy_fcgi setenvifcreates three new mods/mods-available/proxy.conf proxy_fcgi.load proxy.loadLikewise,sudo a2enconf php7.0-fpmcreates a config file/conf-available/php7.0-fpm.confOnce this is done and Apache2 can then run the PHP7 module as a fast-CGI service.
– Talvi Watia
Nov 21 '17 at 12:49
1
worked for linux mint
– zzapper
Jan 20 '18 at 23:41
10
10
While this code snippet may solve the question, including an explanation of how and why this solves the problem would really help to improve the quality of your post. Remember that you are answering the question for readers in the future, not just the person asking now! Please edit your answer to add explanation, and give an indication of what limitations and assumptions apply.
– Toby Speight
Feb 6 '17 at 18:31
While this code snippet may solve the question, including an explanation of how and why this solves the problem would really help to improve the quality of your post. Remember that you are answering the question for readers in the future, not just the person asking now! Please edit your answer to add explanation, and give an indication of what limitations and assumptions apply.
– Toby Speight
Feb 6 '17 at 18:31
2
2
This answer is linux related the topicstarter is clearly using windows.
– Raymond Nijland
Apr 24 '17 at 11:53
This answer is linux related the topicstarter is clearly using windows.
– Raymond Nijland
Apr 24 '17 at 11:53
1
1
@RaymondNijland true but this is canonical and I found this question and it saved me after over an hour of troubleshooting.
– Goose
May 5 '17 at 20:57
@RaymondNijland true but this is canonical and I found this question and it saved me after over an hour of troubleshooting.
– Goose
May 5 '17 at 20:57
How and Why: This happens when PHP7 doesn't configure the default fast-CGI service in the make script.
sudo a2enmod proxy_fcgi setenvif creates three new mods /mods-available/proxy.conf proxy_fcgi.load proxy.load Likewise, sudo a2enconf php7.0-fpm creates a config file /conf-available/php7.0-fpm.conf Once this is done and Apache2 can then run the PHP7 module as a fast-CGI service.– Talvi Watia
Nov 21 '17 at 12:49
How and Why: This happens when PHP7 doesn't configure the default fast-CGI service in the make script.
sudo a2enmod proxy_fcgi setenvif creates three new mods /mods-available/proxy.conf proxy_fcgi.load proxy.load Likewise, sudo a2enconf php7.0-fpm creates a config file /conf-available/php7.0-fpm.conf Once this is done and Apache2 can then run the PHP7 module as a fast-CGI service.– Talvi Watia
Nov 21 '17 at 12:49
1
1
worked for linux mint
– zzapper
Jan 20 '18 at 23:41
worked for linux mint
– zzapper
Jan 20 '18 at 23:41
add a comment |
I'm running Apache on Ubuntu and my issue was that the /etc/apache2/mods-available/php5.conf file was missing this:
<FilesMatch ".+.ph(p[345]?|t|tml)$">
SetHandler application/x-httpd-php
</FilesMatch>
I added it back in and php was parsing php files correctly.
edited Mar 21 '16 at 14:37
Flow
19.1k1179124
answered Mar 19 '13 at 13:34
Matt McDonaldMatt McDonald
41065
add a comment |
I'm running Apache on Ubuntu and my issue was that the /etc/apache2/mods-available/php5.conf file was missing this:
<FilesMatch ".+.ph(p[345]?|t|tml)$">
SetHandler application/x-httpd-php
</FilesMatch>
I added it back in and php was parsing php files correctly.
edited Mar 21 '16 at 14:37
Flow
19.1k1179124
answered Mar 19 '13 at 13:34
Matt McDonaldMatt McDonald
41065
add a comment |
I'm running Apache on Ubuntu and my issue was that the /etc/apache2/mods-available/php5.conf file was missing this:
<FilesMatch ".+.ph(p[345]?|t|tml)$">
SetHandler application/x-httpd-php
</FilesMatch>
I added it back in and php was parsing php files correctly.
edited Mar 21 '16 at 14:37
Flow
19.1k1179124
answered Mar 19 '13 at 13:34
Matt McDonaldMatt McDonald
41065
I'm running Apache on Ubuntu and my issue was that the /etc/apache2/mods-available/php5.conf file was missing this:
<FilesMatch ".+.ph(p[345]?|t|tml)$">
SetHandler application/x-httpd-php
</FilesMatch>
I added it back in and php was parsing php files correctly.
edited Mar 21 '16 at 14:37
Flow
19.1k1179124
answered Mar 19 '13 at 13:34
Matt McDonaldMatt McDonald
41065
edited Mar 21 '16 at 14:37
Flow
19.1k1179124
edited Mar 21 '16 at 14:37
Flow
19.1k1179124
edited Mar 21 '16 at 14:37
Flow
19.1k1179124
19.1k1179124
answered Mar 19 '13 at 13:34
Matt McDonaldMatt McDonald
41065
answered Mar 19 '13 at 13:34
Matt McDonaldMatt McDonald
41065
answered Mar 19 '13 at 13:34
Matt McDonaldMatt McDonald
41065
41065
add a comment |
add a comment |
note for php 7 users, add this to your httpd.conf file:
# PHP 7 specific configuration
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
answered Aug 15 '16 at 9:32
EdCEdC
75868
Just to help other people with this issue. Thehttpd.conffile is located in/etc/apache2/httpd.confIf you're using Ubuntu, it would beapache2.confin the same directory that needs to be modified for PHP7.
– Ahmed Sagarwala
Aug 14 '18 at 19:07
add a comment |
note for php 7 users, add this to your httpd.conf file:
# PHP 7 specific configuration
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
answered Aug 15 '16 at 9:32
EdCEdC
75868
Just to help other people with this issue. Thehttpd.conffile is located in/etc/apache2/httpd.confIf you're using Ubuntu, it would beapache2.confin the same directory that needs to be modified for PHP7.
– Ahmed Sagarwala
Aug 14 '18 at 19:07
add a comment |
note for php 7 users, add this to your httpd.conf file:
# PHP 7 specific configuration
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
answered Aug 15 '16 at 9:32
EdCEdC
75868
note for php 7 users, add this to your httpd.conf file:
# PHP 7 specific configuration
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
answered Aug 15 '16 at 9:32
EdCEdC
75868
answered Aug 15 '16 at 9:32
EdCEdC
75868
answered Aug 15 '16 at 9:32
EdCEdC
75868
answered Aug 15 '16 at 9:32
EdCEdC
75868
75868
Just to help other people with this issue. Thehttpd.conffile is located in/etc/apache2/httpd.confIf you're using Ubuntu, it would beapache2.confin the same directory that needs to be modified for PHP7.
– Ahmed Sagarwala
Aug 14 '18 at 19:07
add a comment |
Just to help other people with this issue. Thehttpd.conffile is located in/etc/apache2/httpd.confIf you're using Ubuntu, it would beapache2.confin the same directory that needs to be modified for PHP7.
– Ahmed Sagarwala
Aug 14 '18 at 19:07
Just to help other people with this issue. The
httpd.conf file is located in /etc/apache2/httpd.conf If you're using Ubuntu, it would be apache2.conf in the same directory that needs to be modified for PHP7.– Ahmed Sagarwala
Aug 14 '18 at 19:07
Just to help other people with this issue. The
httpd.conf file is located in /etc/apache2/httpd.conf If you're using Ubuntu, it would be apache2.conf in the same directory that needs to be modified for PHP7.– Ahmed Sagarwala
Aug 14 '18 at 19:07
add a comment |
I found another problem causing this issue and already solved it. I accidentally saved my script in UTF-16 encoding. It seems that PHP5 can't recognize <?php tag in 16 bit encoding by default.
answered Apr 4 '13 at 18:17
ArrviArrvi
389312
add a comment |
I found another problem causing this issue and already solved it. I accidentally saved my script in UTF-16 encoding. It seems that PHP5 can't recognize <?php tag in 16 bit encoding by default.
answered Apr 4 '13 at 18:17
ArrviArrvi
389312
add a comment |
I found another problem causing this issue and already solved it. I accidentally saved my script in UTF-16 encoding. It seems that PHP5 can't recognize <?php tag in 16 bit encoding by default.
answered Apr 4 '13 at 18:17
ArrviArrvi
389312
I found another problem causing this issue and already solved it. I accidentally saved my script in UTF-16 encoding. It seems that PHP5 can't recognize <?php tag in 16 bit encoding by default.
answered Apr 4 '13 at 18:17
ArrviArrvi
389312
answered Apr 4 '13 at 18:17
ArrviArrvi
389312
answered Apr 4 '13 at 18:17
ArrviArrvi
389312
answered Apr 4 '13 at 18:17
ArrviArrvi
389312
389312
add a comment |
add a comment |
I'm posting this answer because my Virtualmin/Webmin admin interface decided it was a good idea to disable my PHP engine.. took me a while to find the solution, so I thought I'd share it with you guys:
Also, be sure to check that none of your website config files related to this specific host or virtualhost have any php_admin_value's in them that turn off PHP, like this:
php_admin_value engine Off
When in doubt, comment it...
# php_admin_value engine Off
And restart your webserver.
answered Oct 15 '13 at 17:58
Henry van MegenHenry van Megen
1,19521530
Where are these config settings exactly?
– cronoklee
Jul 27 '16 at 14:43
2
@cronoklee In vHost settings of httpd.conf. For existing hosts, you need to edit apache config in webmin. For future hosts, go to virtualmin > server template > apache website. Eitherway, this is not as secure as fastcgi - virtualmin's default. So the correct approach should be to troubleshoot why fcgi doesn't work, for example it may be caused by file permissions.
– Sheepy
Sep 9 '16 at 3:43
If you're using a version of Apache that doesn't have httpd.conf, look in/etc/apache2/mods-enabled/php7.conforphp5.conf
– LXXIII
Oct 20 '16 at 22:53
When in doubt about the location of a certain configuration setting, you can always use grep to find what you're looking for by (for example in this case) typing:sudo grep php_admin_value /etc/* -R
– Henry van Megen
May 23 '18 at 11:05
add a comment |
I'm posting this answer because my Virtualmin/Webmin admin interface decided it was a good idea to disable my PHP engine.. took me a while to find the solution, so I thought I'd share it with you guys:
Also, be sure to check that none of your website config files related to this specific host or virtualhost have any php_admin_value's in them that turn off PHP, like this:
php_admin_value engine Off
When in doubt, comment it...
# php_admin_value engine Off
And restart your webserver.
answered Oct 15 '13 at 17:58
Henry van MegenHenry van Megen
1,19521530
Where are these config settings exactly?
– cronoklee
Jul 27 '16 at 14:43
2
@cronoklee In vHost settings of httpd.conf. For existing hosts, you need to edit apache config in webmin. For future hosts, go to virtualmin > server template > apache website. Eitherway, this is not as secure as fastcgi - virtualmin's default. So the correct approach should be to troubleshoot why fcgi doesn't work, for example it may be caused by file permissions.
– Sheepy
Sep 9 '16 at 3:43
If you're using a version of Apache that doesn't have httpd.conf, look in/etc/apache2/mods-enabled/php7.conforphp5.conf
– LXXIII
Oct 20 '16 at 22:53
When in doubt about the location of a certain configuration setting, you can always use grep to find what you're looking for by (for example in this case) typing:sudo grep php_admin_value /etc/* -R
– Henry van Megen
May 23 '18 at 11:05
add a comment |
I'm posting this answer because my Virtualmin/Webmin admin interface decided it was a good idea to disable my PHP engine.. took me a while to find the solution, so I thought I'd share it with you guys:
Also, be sure to check that none of your website config files related to this specific host or virtualhost have any php_admin_value's in them that turn off PHP, like this:
php_admin_value engine Off
When in doubt, comment it...
# php_admin_value engine Off
And restart your webserver.
answered Oct 15 '13 at 17:58
Henry van MegenHenry van Megen
1,19521530
I'm posting this answer because my Virtualmin/Webmin admin interface decided it was a good idea to disable my PHP engine.. took me a while to find the solution, so I thought I'd share it with you guys:
Also, be sure to check that none of your website config files related to this specific host or virtualhost have any php_admin_value's in them that turn off PHP, like this:
php_admin_value engine Off
When in doubt, comment it...
# php_admin_value engine Off
And restart your webserver.
answered Oct 15 '13 at 17:58
Henry van MegenHenry van Megen
1,19521530
answered Oct 15 '13 at 17:58
Henry van MegenHenry van Megen
1,19521530
answered Oct 15 '13 at 17:58
Henry van MegenHenry van Megen
1,19521530
answered Oct 15 '13 at 17:58
Henry van MegenHenry van Megen
1,19521530
1,19521530
Where are these config settings exactly?
– cronoklee
Jul 27 '16 at 14:43
2
@cronoklee In vHost settings of httpd.conf. For existing hosts, you need to edit apache config in webmin. For future hosts, go to virtualmin > server template > apache website. Eitherway, this is not as secure as fastcgi - virtualmin's default. So the correct approach should be to troubleshoot why fcgi doesn't work, for example it may be caused by file permissions.
– Sheepy
Sep 9 '16 at 3:43
If you're using a version of Apache that doesn't have httpd.conf, look in/etc/apache2/mods-enabled/php7.conforphp5.conf
– LXXIII
Oct 20 '16 at 22:53
When in doubt about the location of a certain configuration setting, you can always use grep to find what you're looking for by (for example in this case) typing:sudo grep php_admin_value /etc/* -R
– Henry van Megen
May 23 '18 at 11:05
add a comment |
Where are these config settings exactly?
– cronoklee
Jul 27 '16 at 14:43
2
@cronoklee In vHost settings of httpd.conf. For existing hosts, you need to edit apache config in webmin. For future hosts, go to virtualmin > server template > apache website. Eitherway, this is not as secure as fastcgi - virtualmin's default. So the correct approach should be to troubleshoot why fcgi doesn't work, for example it may be caused by file permissions.
– Sheepy
Sep 9 '16 at 3:43
If you're using a version of Apache that doesn't have httpd.conf, look in/etc/apache2/mods-enabled/php7.conforphp5.conf
– LXXIII
Oct 20 '16 at 22:53
When in doubt about the location of a certain configuration setting, you can always use grep to find what you're looking for by (for example in this case) typing:sudo grep php_admin_value /etc/* -R
– Henry van Megen
May 23 '18 at 11:05
Where are these config settings exactly?
– cronoklee
Jul 27 '16 at 14:43
Where are these config settings exactly?
– cronoklee
Jul 27 '16 at 14:43
2
2
@cronoklee In vHost settings of httpd.conf. For existing hosts, you need to edit apache config in webmin. For future hosts, go to virtualmin > server template > apache website. Eitherway, this is not as secure as fastcgi - virtualmin's default. So the correct approach should be to troubleshoot why fcgi doesn't work, for example it may be caused by file permissions.
– Sheepy
Sep 9 '16 at 3:43
@cronoklee In vHost settings of httpd.conf. For existing hosts, you need to edit apache config in webmin. For future hosts, go to virtualmin > server template > apache website. Eitherway, this is not as secure as fastcgi - virtualmin's default. So the correct approach should be to troubleshoot why fcgi doesn't work, for example it may be caused by file permissions.
– Sheepy
Sep 9 '16 at 3:43
If you're using a version of Apache that doesn't have httpd.conf, look in
/etc/apache2/mods-enabled/php7.conf or php5.conf– LXXIII
Oct 20 '16 at 22:53
If you're using a version of Apache that doesn't have httpd.conf, look in
/etc/apache2/mods-enabled/php7.conf or php5.conf– LXXIII
Oct 20 '16 at 22:53
When in doubt about the location of a certain configuration setting, you can always use grep to find what you're looking for by (for example in this case) typing:
sudo grep php_admin_value /etc/* -R– Henry van Megen
May 23 '18 at 11:05
When in doubt about the location of a certain configuration setting, you can always use grep to find what you're looking for by (for example in this case) typing:
sudo grep php_admin_value /etc/* -R– Henry van Megen
May 23 '18 at 11:05
add a comment |
You're just opening your php file into browser. You have to open it using localhost url. if you open a file directly from your directory it will not execute the php code in any case.
use: http://locahost/index.php or http:127.0.0.1/index.php
Enable php short code. In your case, you are using <? which is php short code for <?php. By default php short codes are disabled.
Also use: sudo apt-get install php5 libapache2-mod-php5 php5-mcrypt if you are a ubuntu user.
edited Jan 3 at 16:35
isherwood
36.9k1082111
answered Dec 6 '16 at 13:36
Hasan BaigHasan Baig
350514
1
Why is mcrypt required when i'm just including a file? You should noticed that this question is old and the short tags issue was mentioned 16 times, also in the top comment of my question.
– Gui
Dec 6 '16 at 16:20
1
I just share my solution, I was also facing the same error and after executing this command of mcrypt my issue solved. you may also try.
– Hasan Baig
Dec 7 '16 at 7:43
by default php short codes are enabled. short_open_tag=On (Default Value=ON) in php 5.6
– zond
Jan 26 '17 at 13:38
This was my problem, my virtualmin/apache configuration was for 127.0.0.2 but i was putting my external ip address in the browser, i just updated my v/a config and now its working
– Hayden Thring
Jan 15 at 20:14
add a comment |
You're just opening your php file into browser. You have to open it using localhost url. if you open a file directly from your directory it will not execute the php code in any case.
use: http://locahost/index.php or http:127.0.0.1/index.php
Enable php short code. In your case, you are using <? which is php short code for <?php. By default php short codes are disabled.
Also use: sudo apt-get install php5 libapache2-mod-php5 php5-mcrypt if you are a ubuntu user.
edited Jan 3 at 16:35
isherwood
36.9k1082111
answered Dec 6 '16 at 13:36
Hasan BaigHasan Baig
350514
1
Why is mcrypt required when i'm just including a file? You should noticed that this question is old and the short tags issue was mentioned 16 times, also in the top comment of my question.
– Gui
Dec 6 '16 at 16:20
1
I just share my solution, I was also facing the same error and after executing this command of mcrypt my issue solved. you may also try.
– Hasan Baig
Dec 7 '16 at 7:43
by default php short codes are enabled. short_open_tag=On (Default Value=ON) in php 5.6
– zond
Jan 26 '17 at 13:38
This was my problem, my virtualmin/apache configuration was for 127.0.0.2 but i was putting my external ip address in the browser, i just updated my v/a config and now its working
– Hayden Thring
Jan 15 at 20:14
add a comment |
You're just opening your php file into browser. You have to open it using localhost url. if you open a file directly from your directory it will not execute the php code in any case.
use: http://locahost/index.php or http:127.0.0.1/index.php
Enable php short code. In your case, you are using <? which is php short code for <?php. By default php short codes are disabled.
Also use: sudo apt-get install php5 libapache2-mod-php5 php5-mcrypt if you are a ubuntu user.
edited Jan 3 at 16:35
isherwood
36.9k1082111
answered Dec 6 '16 at 13:36
Hasan BaigHasan Baig
350514
You're just opening your php file into browser. You have to open it using localhost url. if you open a file directly from your directory it will not execute the php code in any case.
use: http://locahost/index.php or http:127.0.0.1/index.php
Enable php short code. In your case, you are using <? which is php short code for <?php. By default php short codes are disabled.
Also use: sudo apt-get install php5 libapache2-mod-php5 php5-mcrypt if you are a ubuntu user.
edited Jan 3 at 16:35
isherwood
36.9k1082111
answered Dec 6 '16 at 13:36
Hasan BaigHasan Baig
350514
edited Jan 3 at 16:35
isherwood
36.9k1082111
edited Jan 3 at 16:35
isherwood
36.9k1082111
edited Jan 3 at 16:35
isherwood
36.9k1082111
36.9k1082111
answered Dec 6 '16 at 13:36
Hasan BaigHasan Baig
350514
answered Dec 6 '16 at 13:36
Hasan BaigHasan Baig
350514
answered Dec 6 '16 at 13:36
Hasan BaigHasan Baig
350514
350514
1
Why is mcrypt required when i'm just including a file? You should noticed that this question is old and the short tags issue was mentioned 16 times, also in the top comment of my question.
– Gui
Dec 6 '16 at 16:20
1
I just share my solution, I was also facing the same error and after executing this command of mcrypt my issue solved. you may also try.
– Hasan Baig
Dec 7 '16 at 7:43
by default php short codes are enabled. short_open_tag=On (Default Value=ON) in php 5.6
– zond
Jan 26 '17 at 13:38
This was my problem, my virtualmin/apache configuration was for 127.0.0.2 but i was putting my external ip address in the browser, i just updated my v/a config and now its working
– Hayden Thring
Jan 15 at 20:14
add a comment |
1
Why is mcrypt required when i'm just including a file? You should noticed that this question is old and the short tags issue was mentioned 16 times, also in the top comment of my question.
– Gui
Dec 6 '16 at 16:20
1
I just share my solution, I was also facing the same error and after executing this command of mcrypt my issue solved. you may also try.
– Hasan Baig
Dec 7 '16 at 7:43
by default php short codes are enabled. short_open_tag=On (Default Value=ON) in php 5.6
– zond
Jan 26 '17 at 13:38
This was my problem, my virtualmin/apache configuration was for 127.0.0.2 but i was putting my external ip address in the browser, i just updated my v/a config and now its working
– Hayden Thring
Jan 15 at 20:14
1
1
Why is mcrypt required when i'm just including a file? You should noticed that this question is old and the short tags issue was mentioned 16 times, also in the top comment of my question.
– Gui
Dec 6 '16 at 16:20
Why is mcrypt required when i'm just including a file? You should noticed that this question is old and the short tags issue was mentioned 16 times, also in the top comment of my question.
– Gui
Dec 6 '16 at 16:20
1
1
I just share my solution, I was also facing the same error and after executing this command of mcrypt my issue solved. you may also try.
– Hasan Baig
Dec 7 '16 at 7:43
I just share my solution, I was also facing the same error and after executing this command of mcrypt my issue solved. you may also try.
– Hasan Baig
Dec 7 '16 at 7:43
by default php short codes are enabled. short_open_tag=On (Default Value=ON) in php 5.6
– zond
Jan 26 '17 at 13:38
by default php short codes are enabled. short_open_tag=On (Default Value=ON) in php 5.6
– zond
Jan 26 '17 at 13:38
This was my problem, my virtualmin/apache configuration was for 127.0.0.2 but i was putting my external ip address in the browser, i just updated my v/a config and now its working
– Hayden Thring
Jan 15 at 20:14
This was my problem, my virtualmin/apache configuration was for 127.0.0.2 but i was putting my external ip address in the browser, i just updated my v/a config and now its working
– Hayden Thring
Jan 15 at 20:14
add a comment |
I know it should sound silly... but seldom it happens.
Check if you are trying to execute php from
**http://localhost/info.php**
and not from
file:///var/www/info.php
ps> you can notice that if you write from shell
php info.php
it answer with the code (it means php functions)..
answered Jan 31 '14 at 11:15
user3257072user3257072
8111
PHP works fine (checked using command line). but, when I access the file using URL, it shows PHP code.
– muaaz
Jun 17 '15 at 8:08
add a comment |
I know it should sound silly... but seldom it happens.
Check if you are trying to execute php from
**http://localhost/info.php**
and not from
file:///var/www/info.php
ps> you can notice that if you write from shell
php info.php
it answer with the code (it means php functions)..
answered Jan 31 '14 at 11:15
user3257072user3257072
8111
PHP works fine (checked using command line). but, when I access the file using URL, it shows PHP code.
– muaaz
Jun 17 '15 at 8:08
add a comment |
I know it should sound silly... but seldom it happens.
Check if you are trying to execute php from
**http://localhost/info.php**
and not from
file:///var/www/info.php
ps> you can notice that if you write from shell
php info.php
it answer with the code (it means php functions)..
answered Jan 31 '14 at 11:15
user3257072user3257072
8111
I know it should sound silly... but seldom it happens.
Check if you are trying to execute php from
**http://localhost/info.php**
and not from
file:///var/www/info.php
ps> you can notice that if you write from shell
php info.php
it answer with the code (it means php functions)..
answered Jan 31 '14 at 11:15
user3257072user3257072
8111
answered Jan 31 '14 at 11:15
user3257072user3257072
8111
answered Jan 31 '14 at 11:15
user3257072user3257072
8111
answered Jan 31 '14 at 11:15
user3257072user3257072
8111
8111
PHP works fine (checked using command line). but, when I access the file using URL, it shows PHP code.
– muaaz
Jun 17 '15 at 8:08
add a comment |
PHP works fine (checked using command line). but, when I access the file using URL, it shows PHP code.
– muaaz
Jun 17 '15 at 8:08
PHP works fine (checked using command line). but, when I access the file using URL, it shows PHP code.
– muaaz
Jun 17 '15 at 8:08
PHP works fine (checked using command line). but, when I access the file using URL, it shows PHP code.
– muaaz
Jun 17 '15 at 8:08
add a comment |
This just happened to me again, along with the server downloading html files, rather than processing. I had not use the webserver apache for some time on the computer and meanwhile Ubuntu updated like two more versions from originally installed LTS. Now it is
$ cat /etc/issue
Ubuntu 16.04 LTS
So the php worked after like so:
$ sudo apt-get install lamp-server^
$ sudo a2enmod php7.0
$ sudo service apache2 restart
The webserver was now parsing the php. Maybe now got to update some webs since php7.0 now running where as it was before running php5. Oh well.
answered Jun 12 '16 at 11:04
ndasusersndasusers
599412
you just reinstalled entire server..
– RozzA
May 10 '17 at 21:38
add a comment |
This just happened to me again, along with the server downloading html files, rather than processing. I had not use the webserver apache for some time on the computer and meanwhile Ubuntu updated like two more versions from originally installed LTS. Now it is
$ cat /etc/issue
Ubuntu 16.04 LTS
So the php worked after like so:
$ sudo apt-get install lamp-server^
$ sudo a2enmod php7.0
$ sudo service apache2 restart
The webserver was now parsing the php. Maybe now got to update some webs since php7.0 now running where as it was before running php5. Oh well.
answered Jun 12 '16 at 11:04
ndasusersndasusers
599412
you just reinstalled entire server..
– RozzA
May 10 '17 at 21:38
add a comment |
This just happened to me again, along with the server downloading html files, rather than processing. I had not use the webserver apache for some time on the computer and meanwhile Ubuntu updated like two more versions from originally installed LTS. Now it is
$ cat /etc/issue
Ubuntu 16.04 LTS
So the php worked after like so:
$ sudo apt-get install lamp-server^
$ sudo a2enmod php7.0
$ sudo service apache2 restart
The webserver was now parsing the php. Maybe now got to update some webs since php7.0 now running where as it was before running php5. Oh well.
answered Jun 12 '16 at 11:04
ndasusersndasusers
599412
This just happened to me again, along with the server downloading html files, rather than processing. I had not use the webserver apache for some time on the computer and meanwhile Ubuntu updated like two more versions from originally installed LTS. Now it is
$ cat /etc/issue
Ubuntu 16.04 LTS
So the php worked after like so:
$ sudo apt-get install lamp-server^
$ sudo a2enmod php7.0
$ sudo service apache2 restart
The webserver was now parsing the php. Maybe now got to update some webs since php7.0 now running where as it was before running php5. Oh well.
answered Jun 12 '16 at 11:04
ndasusersndasusers
599412
answered Jun 12 '16 at 11:04
ndasusersndasusers
599412
answered Jun 12 '16 at 11:04
ndasusersndasusers
599412
answered Jun 12 '16 at 11:04
ndasusersndasusers
599412
599412
you just reinstalled entire server..
– RozzA
May 10 '17 at 21:38
add a comment |
you just reinstalled entire server..
– RozzA
May 10 '17 at 21:38
you just reinstalled entire server..
– RozzA
May 10 '17 at 21:38
you just reinstalled entire server..
– RozzA
May 10 '17 at 21:38
add a comment |
I've solved this by uninstalling XAMPP, and installing WAMP.
Thanks for the help.
edited Jun 18 '15 at 12:40
Dummy00001
12.3k22454
answered Feb 25 '11 at 19:38
GuiGui
3,624103451
add a comment |
I've solved this by uninstalling XAMPP, and installing WAMP.
Thanks for the help.
edited Jun 18 '15 at 12:40
Dummy00001
12.3k22454
answered Feb 25 '11 at 19:38
GuiGui
3,624103451
add a comment |
I've solved this by uninstalling XAMPP, and installing WAMP.
Thanks for the help.
edited Jun 18 '15 at 12:40
Dummy00001
12.3k22454
answered Feb 25 '11 at 19:38
GuiGui
3,624103451
I've solved this by uninstalling XAMPP, and installing WAMP.
Thanks for the help.
edited Jun 18 '15 at 12:40
Dummy00001
12.3k22454
answered Feb 25 '11 at 19:38
GuiGui
3,624103451
edited Jun 18 '15 at 12:40
Dummy00001
12.3k22454
edited Jun 18 '15 at 12:40
Dummy00001
12.3k22454
edited Jun 18 '15 at 12:40
Dummy00001
12.3k22454
12.3k22454
answered Feb 25 '11 at 19:38
GuiGui
3,624103451
answered Feb 25 '11 at 19:38
GuiGui
3,624103451
answered Feb 25 '11 at 19:38
GuiGui
3,624103451
3,624103451
add a comment |
add a comment |
i had similar problem but in my case solution was different.
my file that held php code was called "somename.html"
changed it to "somename.php" worked fine
answered Mar 20 '16 at 17:59
NetrusNetrus
6110
This also solved it for me. Does anyone know if the sever will execute php in a .html file or does the file ending always have to be changed to .php when there's a line of php to be executed?
– full_prog_full
Nov 10 '16 at 14:42
depends upon the server settings, for most cases php code that existing in anyfile.html will execute. and if it does not, it can be changed, although idk how :P
– Netrus
Dec 4 '16 at 16:49
add a comment |
i had similar problem but in my case solution was different.
my file that held php code was called "somename.html"
changed it to "somename.php" worked fine
answered Mar 20 '16 at 17:59
NetrusNetrus
6110
This also solved it for me. Does anyone know if the sever will execute php in a .html file or does the file ending always have to be changed to .php when there's a line of php to be executed?
– full_prog_full
Nov 10 '16 at 14:42
depends upon the server settings, for most cases php code that existing in anyfile.html will execute. and if it does not, it can be changed, although idk how :P
– Netrus
Dec 4 '16 at 16:49
add a comment |
i had similar problem but in my case solution was different.
my file that held php code was called "somename.html"
changed it to "somename.php" worked fine
answered Mar 20 '16 at 17:59
NetrusNetrus
6110
i had similar problem but in my case solution was different.
my file that held php code was called "somename.html"
changed it to "somename.php" worked fine
answered Mar 20 '16 at 17:59
NetrusNetrus
6110
answered Mar 20 '16 at 17:59
NetrusNetrus
6110
answered Mar 20 '16 at 17:59
NetrusNetrus
6110
answered Mar 20 '16 at 17:59
NetrusNetrus
6110
6110
This also solved it for me. Does anyone know if the sever will execute php in a .html file or does the file ending always have to be changed to .php when there's a line of php to be executed?
– full_prog_full
Nov 10 '16 at 14:42
depends upon the server settings, for most cases php code that existing in anyfile.html will execute. and if it does not, it can be changed, although idk how :P
– Netrus
Dec 4 '16 at 16:49
add a comment |
This also solved it for me. Does anyone know if the sever will execute php in a .html file or does the file ending always have to be changed to .php when there's a line of php to be executed?
– full_prog_full
Nov 10 '16 at 14:42
depends upon the server settings, for most cases php code that existing in anyfile.html will execute. and if it does not, it can be changed, although idk how :P
– Netrus
Dec 4 '16 at 16:49
This also solved it for me. Does anyone know if the sever will execute php in a .html file or does the file ending always have to be changed to .php when there's a line of php to be executed?
– full_prog_full
Nov 10 '16 at 14:42
This also solved it for me. Does anyone know if the sever will execute php in a .html file or does the file ending always have to be changed to .php when there's a line of php to be executed?
– full_prog_full
Nov 10 '16 at 14:42
depends upon the server settings, for most cases php code that existing in anyfile.html will execute. and if it does not, it can be changed, although idk how :P
– Netrus
Dec 4 '16 at 16:49
depends upon the server settings, for most cases php code that existing in anyfile.html will execute. and if it does not, it can be changed, although idk how :P
– Netrus
Dec 4 '16 at 16:49
add a comment |
on my ubuntu 14.04, apache 2.4, php 5.5.9 install, I tried with a sample.php on /var/www/html (default document root) and it worked ok.
So the problem was on my Virtual Servers config.
The solution was to include, on the Directory def containing the .php, this line:
php_admin_flag engine on
answered Mar 28 '16 at 19:16
RogelioRogelio
1,0761812
and where should I add this line in Apache file in httpd.conf of my virtual server? and I am using Webmin
– suresh pareek
Aug 21 '17 at 12:45
add a comment |
on my ubuntu 14.04, apache 2.4, php 5.5.9 install, I tried with a sample.php on /var/www/html (default document root) and it worked ok.
So the problem was on my Virtual Servers config.
The solution was to include, on the Directory def containing the .php, this line:
php_admin_flag engine on
answered Mar 28 '16 at 19:16
RogelioRogelio
1,0761812
and where should I add this line in Apache file in httpd.conf of my virtual server? and I am using Webmin
– suresh pareek
Aug 21 '17 at 12:45
add a comment |
on my ubuntu 14.04, apache 2.4, php 5.5.9 install, I tried with a sample.php on /var/www/html (default document root) and it worked ok.
So the problem was on my Virtual Servers config.
The solution was to include, on the Directory def containing the .php, this line:
php_admin_flag engine on
answered Mar 28 '16 at 19:16
RogelioRogelio
1,0761812
on my ubuntu 14.04, apache 2.4, php 5.5.9 install, I tried with a sample.php on /var/www/html (default document root) and it worked ok.
So the problem was on my Virtual Servers config.
The solution was to include, on the Directory def containing the .php, this line:
php_admin_flag engine on
answered Mar 28 '16 at 19:16
RogelioRogelio
1,0761812
edited Mar 29 '16 at 15:29
answered Mar 28 '16 at 19:16
RogelioRogelio
1,0761812
answered Mar 28 '16 at 19:16
RogelioRogelio
1,0761812
answered Mar 28 '16 at 19:16
RogelioRogelio
1,0761812
1,0761812
and where should I add this line in Apache file in httpd.conf of my virtual server? and I am using Webmin
– suresh pareek
Aug 21 '17 at 12:45
add a comment |
and where should I add this line in Apache file in httpd.conf of my virtual server? and I am using Webmin
– suresh pareek
Aug 21 '17 at 12:45
and where should I add this line in Apache file in httpd.conf of my virtual server? and I am using Webmin
– suresh pareek
Aug 21 '17 at 12:45
and where should I add this line in Apache file in httpd.conf of my virtual server? and I am using Webmin
– suresh pareek
Aug 21 '17 at 12:45
add a comment |
This was in my .htaccess
DirectoryIndex index.html index.htm
index.html contained PHP code. By default, PHP won't process files with extentions like htm* as PHP code.
You can override this, by adding the following to .htaccess:
<FilesMatch ".+.html$">
SetHandler application/x-httpd-php
</FilesMatch>
answered Dec 4 '16 at 13:40
JahmicJahmic
6,41574755
add a comment |
This was in my .htaccess
DirectoryIndex index.html index.htm
index.html contained PHP code. By default, PHP won't process files with extentions like htm* as PHP code.
You can override this, by adding the following to .htaccess:
<FilesMatch ".+.html$">
SetHandler application/x-httpd-php
</FilesMatch>
answered Dec 4 '16 at 13:40
JahmicJahmic
6,41574755
add a comment |
This was in my .htaccess
DirectoryIndex index.html index.htm
index.html contained PHP code. By default, PHP won't process files with extentions like htm* as PHP code.
You can override this, by adding the following to .htaccess:
<FilesMatch ".+.html$">
SetHandler application/x-httpd-php
</FilesMatch>
answered Dec 4 '16 at 13:40
JahmicJahmic
6,41574755
This was in my .htaccess
DirectoryIndex index.html index.htm
index.html contained PHP code. By default, PHP won't process files with extentions like htm* as PHP code.
You can override this, by adding the following to .htaccess:
<FilesMatch ".+.html$">
SetHandler application/x-httpd-php
</FilesMatch>
answered Dec 4 '16 at 13:40
JahmicJahmic
6,41574755
answered Dec 4 '16 at 13:40
JahmicJahmic
6,41574755
answered Dec 4 '16 at 13:40
JahmicJahmic
6,41574755
answered Dec 4 '16 at 13:40
JahmicJahmic
6,41574755
6,41574755
add a comment |
add a comment |
For fresh setup of LAMP running php 7
edit the file /etc/httpd/conf/httpd.conf
Note: make sure to make backup for it before changing anything.
Paste this at the very bottom of the file:
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
Then, search for LoadModule and paste the following line:
LoadModule php7_module modules/libphp7.so
This line will simply ask httpd to load the php 7 module
Then restart httpd
answered Jun 16 '17 at 3:03
Eric LibayEric Libay
516
add a comment |
For fresh setup of LAMP running php 7
edit the file /etc/httpd/conf/httpd.conf
Note: make sure to make backup for it before changing anything.
Paste this at the very bottom of the file:
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
Then, search for LoadModule and paste the following line:
LoadModule php7_module modules/libphp7.so
This line will simply ask httpd to load the php 7 module
Then restart httpd
answered Jun 16 '17 at 3:03
Eric LibayEric Libay
516
add a comment |
For fresh setup of LAMP running php 7
edit the file /etc/httpd/conf/httpd.conf
Note: make sure to make backup for it before changing anything.
Paste this at the very bottom of the file:
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
Then, search for LoadModule and paste the following line:
LoadModule php7_module modules/libphp7.so
This line will simply ask httpd to load the php 7 module
Then restart httpd
answered Jun 16 '17 at 3:03
Eric LibayEric Libay
516
For fresh setup of LAMP running php 7
edit the file /etc/httpd/conf/httpd.conf
Note: make sure to make backup for it before changing anything.
Paste this at the very bottom of the file:
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
Then, search for LoadModule and paste the following line:
LoadModule php7_module modules/libphp7.so
This line will simply ask httpd to load the php 7 module
Then restart httpd
answered Jun 16 '17 at 3:03
Eric LibayEric Libay
516
answered Jun 16 '17 at 3:03
Eric LibayEric Libay
516
answered Jun 16 '17 at 3:03
Eric LibayEric Libay
516
answered Jun 16 '17 at 3:03
Eric LibayEric Libay
516
516
add a comment |
add a comment |
Check all the packages you have installed for php using:
yum list installed | grep remi
Install all relevant php packages, especially php-devel on your machine.
edited Apr 11 '18 at 8:45
Jai Kumar Rajput
2,12612242
answered Dec 4 '13 at 23:34
Chaitanya ShivadeChaitanya Shivade
562411
add a comment |
Check all the packages you have installed for php using:
yum list installed | grep remi
Install all relevant php packages, especially php-devel on your machine.
edited Apr 11 '18 at 8:45
Jai Kumar Rajput
2,12612242
answered Dec 4 '13 at 23:34
Chaitanya ShivadeChaitanya Shivade
562411
add a comment |
Check all the packages you have installed for php using:
yum list installed | grep remi
Install all relevant php packages, especially php-devel on your machine.
edited Apr 11 '18 at 8:45
Jai Kumar Rajput
2,12612242
answered Dec 4 '13 at 23:34
Chaitanya ShivadeChaitanya Shivade
562411
Check all the packages you have installed for php using:
yum list installed | grep remi
Install all relevant php packages, especially php-devel on your machine.
edited Apr 11 '18 at 8:45
Jai Kumar Rajput
2,12612242
answered Dec 4 '13 at 23:34
Chaitanya ShivadeChaitanya Shivade
562411
edited Apr 11 '18 at 8:45
Jai Kumar Rajput
2,12612242
edited Apr 11 '18 at 8:45
Jai Kumar Rajput
2,12612242
edited Apr 11 '18 at 8:45
Jai Kumar Rajput
2,12612242
2,12612242
answered Dec 4 '13 at 23:34
Chaitanya ShivadeChaitanya Shivade
562411
answered Dec 4 '13 at 23:34
Chaitanya ShivadeChaitanya Shivade
562411
answered Dec 4 '13 at 23:34
Chaitanya ShivadeChaitanya Shivade
562411
562411
add a comment |
add a comment |
I faced this issue on php 7.1 that comes with High Sierra (OS X 10.13.5), editing /etc/apache2/httpd.conf with following changes helped:
Uncomment this line
LoadModule php7_module libexec/apache2/libphp7.so
Paste following at the end
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
answered Jun 8 '18 at 16:49
AamirRAamirR
4,00912434
Like same can you pls suggest Wamp 3 version same error. There is no /etc/apache2/httpd.conf folder path in wamp 3. @AamirR
– Gem
Jan 9 at 7:00
Are you using an extension other the.phpfor code file? if so rename it to be .php and check, also check if you code is having short_open_tags<?, if so try changing to<?php
– AamirR
Jan 9 at 8:46
add a comment |
I faced this issue on php 7.1 that comes with High Sierra (OS X 10.13.5), editing /etc/apache2/httpd.conf with following changes helped:
Uncomment this line
LoadModule php7_module libexec/apache2/libphp7.so
Paste following at the end
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
answered Jun 8 '18 at 16:49
AamirRAamirR
4,00912434
Like same can you pls suggest Wamp 3 version same error. There is no /etc/apache2/httpd.conf folder path in wamp 3. @AamirR
– Gem
Jan 9 at 7:00
Are you using an extension other the.phpfor code file? if so rename it to be .php and check, also check if you code is having short_open_tags<?, if so try changing to<?php
– AamirR
Jan 9 at 8:46
add a comment |
I faced this issue on php 7.1 that comes with High Sierra (OS X 10.13.5), editing /etc/apache2/httpd.conf with following changes helped:
Uncomment this line
LoadModule php7_module libexec/apache2/libphp7.so
Paste following at the end
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
answered Jun 8 '18 at 16:49
AamirRAamirR
4,00912434
I faced this issue on php 7.1 that comes with High Sierra (OS X 10.13.5), editing /etc/apache2/httpd.conf with following changes helped:
Uncomment this line
LoadModule php7_module libexec/apache2/libphp7.so
Paste following at the end
<IfModule php7_module>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
answered Jun 8 '18 at 16:49
AamirRAamirR
4,00912434
answered Jun 8 '18 at 16:49
AamirRAamirR
4,00912434
answered Jun 8 '18 at 16:49
AamirRAamirR
4,00912434
answered Jun 8 '18 at 16:49
AamirRAamirR
4,00912434
4,00912434
Like same can you pls suggest Wamp 3 version same error. There is no /etc/apache2/httpd.conf folder path in wamp 3. @AamirR
– Gem
Jan 9 at 7:00
Are you using an extension other the.phpfor code file? if so rename it to be .php and check, also check if you code is having short_open_tags<?, if so try changing to<?php
– AamirR
Jan 9 at 8:46
add a comment |
Like same can you pls suggest Wamp 3 version same error. There is no /etc/apache2/httpd.conf folder path in wamp 3. @AamirR
– Gem
Jan 9 at 7:00
Are you using an extension other the.phpfor code file? if so rename it to be .php and check, also check if you code is having short_open_tags<?, if so try changing to<?php
– AamirR
Jan 9 at 8:46
Like same can you pls suggest Wamp 3 version same error. There is no /etc/apache2/httpd.conf folder path in wamp 3. @AamirR
– Gem
Jan 9 at 7:00
Like same can you pls suggest Wamp 3 version same error. There is no /etc/apache2/httpd.conf folder path in wamp 3. @AamirR
– Gem
Jan 9 at 7:00
Are you using an extension other the
.php for code file? if so rename it to be .php and check, also check if you code is having short_open_tags <?, if so try changing to <?php– AamirR
Jan 9 at 8:46
Are you using an extension other the
.php for code file? if so rename it to be .php and check, also check if you code is having short_open_tags <?, if so try changing to <?php– AamirR
Jan 9 at 8:46
add a comment |
I think the problem that it is showing code instead of the result is that it is not going to local host . recheck what address u r going in. are u going to a local file directory or to the local host.
from the screenshot u sent it is going to ur computer not to the localhost.
"file:/// " it should be "localhost/"
answered May 27 '16 at 1:02
NavNav
419
add a comment |
I think the problem that it is showing code instead of the result is that it is not going to local host . recheck what address u r going in. are u going to a local file directory or to the local host.
from the screenshot u sent it is going to ur computer not to the localhost.
"file:/// " it should be "localhost/"
answered May 27 '16 at 1:02
NavNav
419
add a comment |
I think the problem that it is showing code instead of the result is that it is not going to local host . recheck what address u r going in. are u going to a local file directory or to the local host.
from the screenshot u sent it is going to ur computer not to the localhost.
"file:/// " it should be "localhost/"
answered May 27 '16 at 1:02
NavNav
419
I think the problem that it is showing code instead of the result is that it is not going to local host . recheck what address u r going in. are u going to a local file directory or to the local host.
from the screenshot u sent it is going to ur computer not to the localhost.
"file:/// " it should be "localhost/"
answered May 27 '16 at 1:02
NavNav
419
answered May 27 '16 at 1:02
NavNav
419
answered May 27 '16 at 1:02
NavNav
419
answered May 27 '16 at 1:02
NavNav
419
419
add a comment |
add a comment |
Reinstalling the mcrypt module worked for me.
$sudo apt-get install php5-mcrypt
$sudo php5enmod mcrypt
answered Oct 17 '16 at 5:46
b.gb.g
1031111
It honestly did, maybe because I hadn't configured the PHP properly on my system.But, since the question I asked regarding the same issue has been marked as a duplicate to this question, I only could answer it here. I wonder why the down vote.
– b.g
Oct 17 '16 at 13:06
This answer is linux related the topicstarter is clearly using windows
– Raymond Nijland
Apr 24 '17 at 11:55
add a comment |
Reinstalling the mcrypt module worked for me.
$sudo apt-get install php5-mcrypt
$sudo php5enmod mcrypt
answered Oct 17 '16 at 5:46
b.gb.g
1031111
It honestly did, maybe because I hadn't configured the PHP properly on my system.But, since the question I asked regarding the same issue has been marked as a duplicate to this question, I only could answer it here. I wonder why the down vote.
– b.g
Oct 17 '16 at 13:06
This answer is linux related the topicstarter is clearly using windows
– Raymond Nijland
Apr 24 '17 at 11:55
add a comment |
Reinstalling the mcrypt module worked for me.
$sudo apt-get install php5-mcrypt
$sudo php5enmod mcrypt
answered Oct 17 '16 at 5:46
b.gb.g
1031111
Reinstalling the mcrypt module worked for me.
$sudo apt-get install php5-mcrypt
$sudo php5enmod mcrypt
answered Oct 17 '16 at 5:46
b.gb.g
1031111
answered Oct 17 '16 at 5:46
b.gb.g
1031111
answered Oct 17 '16 at 5:46
b.gb.g
1031111
answered Oct 17 '16 at 5:46
b.gb.g
1031111
1031111
It honestly did, maybe because I hadn't configured the PHP properly on my system.But, since the question I asked regarding the same issue has been marked as a duplicate to this question, I only could answer it here. I wonder why the down vote.
– b.g
Oct 17 '16 at 13:06
This answer is linux related the topicstarter is clearly using windows
– Raymond Nijland
Apr 24 '17 at 11:55
add a comment |
It honestly did, maybe because I hadn't configured the PHP properly on my system.But, since the question I asked regarding the same issue has been marked as a duplicate to this question, I only could answer it here. I wonder why the down vote.
– b.g
Oct 17 '16 at 13:06
This answer is linux related the topicstarter is clearly using windows
– Raymond Nijland
Apr 24 '17 at 11:55
It honestly did, maybe because I hadn't configured the PHP properly on my system.But, since the question I asked regarding the same issue has been marked as a duplicate to this question, I only could answer it here. I wonder why the down vote.
– b.g
Oct 17 '16 at 13:06
It honestly did, maybe because I hadn't configured the PHP properly on my system.But, since the question I asked regarding the same issue has been marked as a duplicate to this question, I only could answer it here. I wonder why the down vote.
– b.g
Oct 17 '16 at 13:06
This answer is linux related the topicstarter is clearly using windows
– Raymond Nijland
Apr 24 '17 at 11:55
This answer is linux related the topicstarter is clearly using windows
– Raymond Nijland
Apr 24 '17 at 11:55
add a comment |
I had a case that I accidentally started untaring my files directory in root. It added the .htaccess file from my files folder that would block all php
# If we know how to do it safely, disable the PHP engine entirely.
<IfModule mod_php5.c>
php_flag engine off
</IfModule>
Bottom line check the .htaccess file on root.
answered Dec 2 '16 at 23:01
albertskialbertski
998827
add a comment |
I had a case that I accidentally started untaring my files directory in root. It added the .htaccess file from my files folder that would block all php
# If we know how to do it safely, disable the PHP engine entirely.
<IfModule mod_php5.c>
php_flag engine off
</IfModule>
Bottom line check the .htaccess file on root.
answered Dec 2 '16 at 23:01
albertskialbertski
998827
add a comment |
I had a case that I accidentally started untaring my files directory in root. It added the .htaccess file from my files folder that would block all php
# If we know how to do it safely, disable the PHP engine entirely.
<IfModule mod_php5.c>
php_flag engine off
</IfModule>
Bottom line check the .htaccess file on root.
answered Dec 2 '16 at 23:01
albertskialbertski
998827
I had a case that I accidentally started untaring my files directory in root. It added the .htaccess file from my files folder that would block all php
# If we know how to do it safely, disable the PHP engine entirely.
<IfModule mod_php5.c>
php_flag engine off
</IfModule>
Bottom line check the .htaccess file on root.
answered Dec 2 '16 at 23:01
albertskialbertski
998827
answered Dec 2 '16 at 23:01
albertskialbertski
998827
answered Dec 2 '16 at 23:01
albertskialbertski
998827
answered Dec 2 '16 at 23:01
albertskialbertski
998827
998827
add a comment |
add a comment |
If you have configuration like this:
<VirtualHost *:80>
ServerName example.com
DocumentRoot "/var/www/example.com"
<FilesMatch ".php$">
SetHandler "proxy:fcgi://127.0.0.1:9000"
</FilesMatch>
</VirtualHost>
Uncomment next lines in your httpd.conf
LoadModule proxy_module lib/httpd/modules/mod_proxy.so
LoadModule proxy_fcgi_module lib/httpd/modules/mod_proxy_fcgi.so
It works for me
answered Feb 27 '18 at 14:21
user3890355user3890355
46579
add a comment |
If you have configuration like this:
<VirtualHost *:80>
ServerName example.com
DocumentRoot "/var/www/example.com"
<FilesMatch ".php$">
SetHandler "proxy:fcgi://127.0.0.1:9000"
</FilesMatch>
</VirtualHost>
Uncomment next lines in your httpd.conf
LoadModule proxy_module lib/httpd/modules/mod_proxy.so
LoadModule proxy_fcgi_module lib/httpd/modules/mod_proxy_fcgi.so
It works for me
answered Feb 27 '18 at 14:21
user3890355user3890355
46579
add a comment |
If you have configuration like this:
<VirtualHost *:80>
ServerName example.com
DocumentRoot "/var/www/example.com"
<FilesMatch ".php$">
SetHandler "proxy:fcgi://127.0.0.1:9000"
</FilesMatch>
</VirtualHost>
Uncomment next lines in your httpd.conf
LoadModule proxy_module lib/httpd/modules/mod_proxy.so
LoadModule proxy_fcgi_module lib/httpd/modules/mod_proxy_fcgi.so
It works for me
answered Feb 27 '18 at 14:21
user3890355user3890355
46579
If you have configuration like this:
<VirtualHost *:80>
ServerName example.com
DocumentRoot "/var/www/example.com"
<FilesMatch ".php$">
SetHandler "proxy:fcgi://127.0.0.1:9000"
</FilesMatch>
</VirtualHost>
Uncomment next lines in your httpd.conf
LoadModule proxy_module lib/httpd/modules/mod_proxy.so
LoadModule proxy_fcgi_module lib/httpd/modules/mod_proxy_fcgi.so
It works for me
answered Feb 27 '18 at 14:21
user3890355user3890355
46579
answered Feb 27 '18 at 14:21
user3890355user3890355
46579
answered Feb 27 '18 at 14:21
user3890355user3890355
46579
answered Feb 27 '18 at 14:21
user3890355user3890355
46579
46579
add a comment |
add a comment |
Add AddType application/x-httpd-php .php to your httpd.conf file if you are using Apache 2.4
answered May 4 '18 at 13:56
AshahmaliAshahmali
837
add a comment |
Add AddType application/x-httpd-php .php to your httpd.conf file if you are using Apache 2.4
answered May 4 '18 at 13:56
AshahmaliAshahmali
837
add a comment |
Add AddType application/x-httpd-php .php to your httpd.conf file if you are using Apache 2.4
answered May 4 '18 at 13:56
AshahmaliAshahmali
837
Add AddType application/x-httpd-php .php to your httpd.conf file if you are using Apache 2.4
answered May 4 '18 at 13:56
AshahmaliAshahmali
837
answered May 4 '18 at 13:56
AshahmaliAshahmali
837
answered May 4 '18 at 13:56
AshahmaliAshahmali
837
answered May 4 '18 at 13:56
AshahmaliAshahmali
837
837
add a comment |
add a comment |
Make sure the script contains
<?php
before the code that should be executed. There should be no space between <? and php in this.
answered Jun 1 '18 at 4:42
BarmarBarmar
424k35248349
add a comment |
Make sure the script contains
<?php
before the code that should be executed. There should be no space between <? and php in this.
answered Jun 1 '18 at 4:42
BarmarBarmar
424k35248349
add a comment |
Make sure the script contains
<?php
before the code that should be executed. There should be no space between <? and php in this.
answered Jun 1 '18 at 4:42
BarmarBarmar
424k35248349
Make sure the script contains
<?php
before the code that should be executed. There should be no space between <? and php in this.
answered Jun 1 '18 at 4:42
BarmarBarmar
424k35248349
answered Jun 1 '18 at 4:42
BarmarBarmar
424k35248349
answered Jun 1 '18 at 4:42
BarmarBarmar
424k35248349
answered Jun 1 '18 at 4:42
BarmarBarmar
424k35248349
424k35248349
add a comment |
add a comment |
Just spent hours of trying to get PHP 5 to run with Apache 2.4 on Windows 10. Finally for me it was a typo in httpd.conf LoadModule. Drew attention to writing and exact module path through the last answer in this apachelounge thread of denny2018. Thank you!
After two nights I discovered... My directory was written
c:(lower case)
I had LoadModule php5_module "c:/php/php5apache2.dll" but correct for apache 2.4 is:
LoadModule php5_module "C:/php/php5apache2_4.dll"
So I also missed the _4 before (for apache 2.4). The full snippet that worked for me:
# PHP
LoadModule php5_module "C:/php/php5apache2_4.dll"
AddHandler application/x-httpd-php .php
<FilesMatch .php$>
SetHandler application/x-httpd-php
</FilesMatch>
Just tried PHP 7. There the LoadModule line in httpd.conf for Apache 2.4 reads
LoadModule php7_module "C:/php/php7apache2_4.dll"
Currently php manual shows up c:/php/php5apache2.dll which of course needs to be adjusted.
answered Sep 6 '18 at 14:36
bobble bubblebobble bubble
6,30511428
add a comment |
Just spent hours of trying to get PHP 5 to run with Apache 2.4 on Windows 10. Finally for me it was a typo in httpd.conf LoadModule. Drew attention to writing and exact module path through the last answer in this apachelounge thread of denny2018. Thank you!
After two nights I discovered... My directory was written
c:(lower case)
I had LoadModule php5_module "c:/php/php5apache2.dll" but correct for apache 2.4 is:
LoadModule php5_module "C:/php/php5apache2_4.dll"
So I also missed the _4 before (for apache 2.4). The full snippet that worked for me:
# PHP
LoadModule php5_module "C:/php/php5apache2_4.dll"
AddHandler application/x-httpd-php .php
<FilesMatch .php$>
SetHandler application/x-httpd-php
</FilesMatch>
Just tried PHP 7. There the LoadModule line in httpd.conf for Apache 2.4 reads
LoadModule php7_module "C:/php/php7apache2_4.dll"
Currently php manual shows up c:/php/php5apache2.dll which of course needs to be adjusted.
answered Sep 6 '18 at 14:36
bobble bubblebobble bubble
6,30511428
add a comment |
Just spent hours of trying to get PHP 5 to run with Apache 2.4 on Windows 10. Finally for me it was a typo in httpd.conf LoadModule. Drew attention to writing and exact module path through the last answer in this apachelounge thread of denny2018. Thank you!
After two nights I discovered... My directory was written
c:(lower case)
I had LoadModule php5_module "c:/php/php5apache2.dll" but correct for apache 2.4 is:
LoadModule php5_module "C:/php/php5apache2_4.dll"
So I also missed the _4 before (for apache 2.4). The full snippet that worked for me:
# PHP
LoadModule php5_module "C:/php/php5apache2_4.dll"
AddHandler application/x-httpd-php .php
<FilesMatch .php$>
SetHandler application/x-httpd-php
</FilesMatch>
Just tried PHP 7. There the LoadModule line in httpd.conf for Apache 2.4 reads
LoadModule php7_module "C:/php/php7apache2_4.dll"
Currently php manual shows up c:/php/php5apache2.dll which of course needs to be adjusted.
answered Sep 6 '18 at 14:36
bobble bubblebobble bubble
6,30511428
Just spent hours of trying to get PHP 5 to run with Apache 2.4 on Windows 10. Finally for me it was a typo in httpd.conf LoadModule. Drew attention to writing and exact module path through the last answer in this apachelounge thread of denny2018. Thank you!
After two nights I discovered... My directory was written
c:(lower case)
I had LoadModule php5_module "c:/php/php5apache2.dll" but correct for apache 2.4 is:
LoadModule php5_module "C:/php/php5apache2_4.dll"
So I also missed the _4 before (for apache 2.4). The full snippet that worked for me:
# PHP
LoadModule php5_module "C:/php/php5apache2_4.dll"
AddHandler application/x-httpd-php .php
<FilesMatch .php$>
SetHandler application/x-httpd-php
</FilesMatch>
Just tried PHP 7. There the LoadModule line in httpd.conf for Apache 2.4 reads
LoadModule php7_module "C:/php/php7apache2_4.dll"
Currently php manual shows up c:/php/php5apache2.dll which of course needs to be adjusted.
answered Sep 6 '18 at 14:36
bobble bubblebobble bubble
6,30511428
edited Sep 8 '18 at 13:20
answered Sep 6 '18 at 14:36
bobble bubblebobble bubble
6,30511428
answered Sep 6 '18 at 14:36
bobble bubblebobble bubble
6,30511428
answered Sep 6 '18 at 14:36
bobble bubblebobble bubble
6,30511428
6,30511428
add a comment |
add a comment |
in my case (Apache/2.4.34),
after uncommenting the specific module
"LoadModule php7_module libexec/apache2/libphp7.so"
from
"/etc/apache2/httpd.conf"
my problem was gone.
answered Oct 3 '18 at 4:49
sh6210sh6210
80369
add a comment |
in my case (Apache/2.4.34),
after uncommenting the specific module
"LoadModule php7_module libexec/apache2/libphp7.so"
from
"/etc/apache2/httpd.conf"
my problem was gone.
answered Oct 3 '18 at 4:49
sh6210sh6210
80369
add a comment |
in my case (Apache/2.4.34),
after uncommenting the specific module
"LoadModule php7_module libexec/apache2/libphp7.so"
from
"/etc/apache2/httpd.conf"
my problem was gone.
answered Oct 3 '18 at 4:49
sh6210sh6210
80369
in my case (Apache/2.4.34),
after uncommenting the specific module
"LoadModule php7_module libexec/apache2/libphp7.so"
from
"/etc/apache2/httpd.conf"
my problem was gone.
answered Oct 3 '18 at 4:49
sh6210sh6210
80369
answered Oct 3 '18 at 4:49
sh6210sh6210
80369
answered Oct 3 '18 at 4:49
sh6210sh6210
80369
answered Oct 3 '18 at 4:49
sh6210sh6210
80369
80369
add a comment |
add a comment |
38
Are you using short tags
<?instead of<?php?– Dan Grossman
Feb 25 '11 at 19:09
2
Yes, i'm using <? ...
– Gui
Feb 25 '11 at 19:12
21
Don't EVER use short tags. (
<?). They are deprecated, don't really work in a lot of places, and are otherwise completely unneccessary. Saving three keystrokes is not a valid reason to allow potential for your code to fail on probably half of the servers it may run on.– mopsyd
Feb 11 '15 at 19:53
6
@mopsyd Where does it say that short tags are deprecated? Please note that short tags are not the same as short echo tags, and short echo tags have been supported by default since PHP 5.4, regardless of the
short_open_tagsetting.– Kyle Anderson
Mar 15 '16 at 19:23
2
I am aware that short tags are not short echo tags, which is why I specified which I was talking about in the comment. At the time of writing, short tags were flagged for deprecation for the php 6 release, though that has apparently changed since. The problem still exists that a lot of servers have them disabled, which makes your code significantly less portable. This does not apply to short echo tags (
<?=), which should run fine on php 5.4+ regardless of server settings.– mopsyd
Mar 18 '16 at 0:44