Mixing
Windows Service - UnauthorizedAccessException Error when Installing Service (C#)
So I am trying to create a service using C# in Visual Studio 2017 and I keep getting an error when I try to install it.
Right now, I don't even have anything in my service, I just want to be able to install the service. I created a new Project in Visual Studio 2017 using the Windows Service (.NET Framework) template under Visual C# > Windows Desktop. I then added the installer via Right Click > Add Installer. For serviceProcessInstaller1, I set the account to LocalSystem. And...that's it!
Now, I try to install it. I open up command prompt (run as administrator) and I do
InstallUtil ServiceTest.exe
Things start off smoothly, but then I get a message:
"An exception occured during the Install phase.
System.UnauthorizedAccessException: Attempted to perform an
unauthorized operation."
What could be generating this message?
I've googled and tried the following things:
- Ensure I run command prompt as administrator.
- Assign Full Control to
the project folder to my admin account. - Configure permissions to Full
Control for admin account in the security log of regedit. - Log into my
computer as an administrator (rather than regular user) and run it
that way.
Despite these things, I keep getting the same error. What else could I be doing wrong? Would really appreciate some advice!
Note: I am trying to install this service locally on my computer.
Edit: Per request, here are the logs. I named my project "FailedService", by the way, since I can't get it to work!
InstallUtil.InstallLog
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe assembly's progress.
The file is located at C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog.
An exception occurred during the Install phase.
System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
The Rollback phase of the installation is beginning.
See the contents of the log file for the C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe assembly's progress.
The file is located at C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
FailedService.InstallLog
Installing assembly 'C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe'.
Affected parameters are:
logtoconsole =
logfile = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog
assemblypath = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe
Installing service Service1...
Creating EventLog source Service1 in log Application...
Rolling back assembly 'C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe'.
Affected parameters are:
logtoconsole =
logfile = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog
assemblypath = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe
Restoring event log to previous state for source Service1.
c# windows service windows-services installutil
asked Nov 21 '18 at 15:37
nightmare637nightmare637
729
|
show 9 more comments
So I am trying to create a service using C# in Visual Studio 2017 and I keep getting an error when I try to install it.
Right now, I don't even have anything in my service, I just want to be able to install the service. I created a new Project in Visual Studio 2017 using the Windows Service (.NET Framework) template under Visual C# > Windows Desktop. I then added the installer via Right Click > Add Installer. For serviceProcessInstaller1, I set the account to LocalSystem. And...that's it!
Now, I try to install it. I open up command prompt (run as administrator) and I do
InstallUtil ServiceTest.exe
Things start off smoothly, but then I get a message:
"An exception occured during the Install phase.
System.UnauthorizedAccessException: Attempted to perform an
unauthorized operation."
What could be generating this message?
I've googled and tried the following things:
- Ensure I run command prompt as administrator.
- Assign Full Control to
the project folder to my admin account. - Configure permissions to Full
Control for admin account in the security log of regedit. - Log into my
computer as an administrator (rather than regular user) and run it
that way.
Despite these things, I keep getting the same error. What else could I be doing wrong? Would really appreciate some advice!
Note: I am trying to install this service locally on my computer.
Edit: Per request, here are the logs. I named my project "FailedService", by the way, since I can't get it to work!
InstallUtil.InstallLog
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe assembly's progress.
The file is located at C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog.
An exception occurred during the Install phase.
System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
The Rollback phase of the installation is beginning.
See the contents of the log file for the C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe assembly's progress.
The file is located at C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
FailedService.InstallLog
Installing assembly 'C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe'.
Affected parameters are:
logtoconsole =
logfile = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog
assemblypath = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe
Installing service Service1...
Creating EventLog source Service1 in log Application...
Rolling back assembly 'C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe'.
Affected parameters are:
logtoconsole =
logfile = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog
assemblypath = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe
Restoring event log to previous state for source Service1.
c# windows service windows-services installutil
asked Nov 21 '18 at 15:37
nightmare637nightmare637
729
could you show the parts of your code where you override the oninstallation method to set the user account to localsystem? try leaving that out at first, does it work then?
– dlatikay
Nov 21 '18 at 15:39
related: stackoverflow.com/a/15502739/1132334, stackoverflow.com/a/2205777/1132334
– dlatikay
Nov 21 '18 at 15:49
I don't think I overrode the oninstallation method... To set the user account to local system, I had ProjectInstaller.cs open in Design View, I left clicked on serviceProcessInstaller1, and in the properties box beneath Misc, I set Account to "LocalSystem". Not sure if it matters, but I tried LocalService and NetworkService and received the same results. Would you still like to see my code - I left everything as default and did not make any modifications other than what I mentioned?
– nightmare637
Nov 21 '18 at 15:52
Not sure, what your service does, simple guessing ... there is a check-box for installed services, that 'Allow service to interact with desktop'. Please read this post, since setting that flag might be a security concern (it can be set programmatically).
– nilsK
Nov 21 '18 at 15:55
nilsK, I have to have the service installed in the first place to be able to check that flag.
– nightmare637
Nov 21 '18 at 16:11
|
show 9 more comments
So I am trying to create a service using C# in Visual Studio 2017 and I keep getting an error when I try to install it.
Right now, I don't even have anything in my service, I just want to be able to install the service. I created a new Project in Visual Studio 2017 using the Windows Service (.NET Framework) template under Visual C# > Windows Desktop. I then added the installer via Right Click > Add Installer. For serviceProcessInstaller1, I set the account to LocalSystem. And...that's it!
Now, I try to install it. I open up command prompt (run as administrator) and I do
InstallUtil ServiceTest.exe
Things start off smoothly, but then I get a message:
"An exception occured during the Install phase.
System.UnauthorizedAccessException: Attempted to perform an
unauthorized operation."
What could be generating this message?
I've googled and tried the following things:
- Ensure I run command prompt as administrator.
- Assign Full Control to
the project folder to my admin account. - Configure permissions to Full
Control for admin account in the security log of regedit. - Log into my
computer as an administrator (rather than regular user) and run it
that way.
Despite these things, I keep getting the same error. What else could I be doing wrong? Would really appreciate some advice!
Note: I am trying to install this service locally on my computer.
Edit: Per request, here are the logs. I named my project "FailedService", by the way, since I can't get it to work!
InstallUtil.InstallLog
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe assembly's progress.
The file is located at C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog.
An exception occurred during the Install phase.
System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
The Rollback phase of the installation is beginning.
See the contents of the log file for the C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe assembly's progress.
The file is located at C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
FailedService.InstallLog
Installing assembly 'C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe'.
Affected parameters are:
logtoconsole =
logfile = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog
assemblypath = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe
Installing service Service1...
Creating EventLog source Service1 in log Application...
Rolling back assembly 'C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe'.
Affected parameters are:
logtoconsole =
logfile = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog
assemblypath = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe
Restoring event log to previous state for source Service1.
c# windows service windows-services installutil
asked Nov 21 '18 at 15:37
nightmare637nightmare637
729
So I am trying to create a service using C# in Visual Studio 2017 and I keep getting an error when I try to install it.
Right now, I don't even have anything in my service, I just want to be able to install the service. I created a new Project in Visual Studio 2017 using the Windows Service (.NET Framework) template under Visual C# > Windows Desktop. I then added the installer via Right Click > Add Installer. For serviceProcessInstaller1, I set the account to LocalSystem. And...that's it!
Now, I try to install it. I open up command prompt (run as administrator) and I do
InstallUtil ServiceTest.exe
Things start off smoothly, but then I get a message:
"An exception occured during the Install phase.
System.UnauthorizedAccessException: Attempted to perform an
unauthorized operation."
What could be generating this message?
I've googled and tried the following things:
- Ensure I run command prompt as administrator.
- Assign Full Control to
the project folder to my admin account. - Configure permissions to Full
Control for admin account in the security log of regedit. - Log into my
computer as an administrator (rather than regular user) and run it
that way.
Despite these things, I keep getting the same error. What else could I be doing wrong? Would really appreciate some advice!
Note: I am trying to install this service locally on my computer.
Edit: Per request, here are the logs. I named my project "FailedService", by the way, since I can't get it to work!
InstallUtil.InstallLog
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe assembly's progress.
The file is located at C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog.
An exception occurred during the Install phase.
System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
The Rollback phase of the installation is beginning.
See the contents of the log file for the C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe assembly's progress.
The file is located at C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
FailedService.InstallLog
Installing assembly 'C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe'.
Affected parameters are:
logtoconsole =
logfile = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog
assemblypath = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe
Installing service Service1...
Creating EventLog source Service1 in log Application...
Rolling back assembly 'C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe'.
Affected parameters are:
logtoconsole =
logfile = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.InstallLog
assemblypath = C:Usersfirst.m.lastsourcereposFailedServiceFailedServicebinDebugFailedService.exe
Restoring event log to previous state for source Service1.
c# windows service windows-services installutil
c# windows service windows-services installutil
asked Nov 21 '18 at 15:37
nightmare637nightmare637
729
asked Nov 21 '18 at 15:37
nightmare637nightmare637
729
edited Nov 21 '18 at 16:35
nightmare637
asked Nov 21 '18 at 15:37
nightmare637nightmare637
729
asked Nov 21 '18 at 15:37
nightmare637nightmare637
729
asked Nov 21 '18 at 15:37
nightmare637nightmare637
729
729
could you show the parts of your code where you override the oninstallation method to set the user account to localsystem? try leaving that out at first, does it work then?
– dlatikay
Nov 21 '18 at 15:39
related: stackoverflow.com/a/15502739/1132334, stackoverflow.com/a/2205777/1132334
– dlatikay
Nov 21 '18 at 15:49
I don't think I overrode the oninstallation method... To set the user account to local system, I had ProjectInstaller.cs open in Design View, I left clicked on serviceProcessInstaller1, and in the properties box beneath Misc, I set Account to "LocalSystem". Not sure if it matters, but I tried LocalService and NetworkService and received the same results. Would you still like to see my code - I left everything as default and did not make any modifications other than what I mentioned?
– nightmare637
Nov 21 '18 at 15:52
Not sure, what your service does, simple guessing ... there is a check-box for installed services, that 'Allow service to interact with desktop'. Please read this post, since setting that flag might be a security concern (it can be set programmatically).
– nilsK
Nov 21 '18 at 15:55
nilsK, I have to have the service installed in the first place to be able to check that flag.
– nightmare637
Nov 21 '18 at 16:11
|
show 9 more comments
could you show the parts of your code where you override the oninstallation method to set the user account to localsystem? try leaving that out at first, does it work then?
– dlatikay
Nov 21 '18 at 15:39
related: stackoverflow.com/a/15502739/1132334, stackoverflow.com/a/2205777/1132334
– dlatikay
Nov 21 '18 at 15:49
I don't think I overrode the oninstallation method... To set the user account to local system, I had ProjectInstaller.cs open in Design View, I left clicked on serviceProcessInstaller1, and in the properties box beneath Misc, I set Account to "LocalSystem". Not sure if it matters, but I tried LocalService and NetworkService and received the same results. Would you still like to see my code - I left everything as default and did not make any modifications other than what I mentioned?
– nightmare637
Nov 21 '18 at 15:52
Not sure, what your service does, simple guessing ... there is a check-box for installed services, that 'Allow service to interact with desktop'. Please read this post, since setting that flag might be a security concern (it can be set programmatically).
– nilsK
Nov 21 '18 at 15:55
nilsK, I have to have the service installed in the first place to be able to check that flag.
– nightmare637
Nov 21 '18 at 16:11
could you show the parts of your code where you override the oninstallation method to set the user account to localsystem? try leaving that out at first, does it work then?
– dlatikay
Nov 21 '18 at 15:39
could you show the parts of your code where you override the oninstallation method to set the user account to localsystem? try leaving that out at first, does it work then?
– dlatikay
Nov 21 '18 at 15:39
related: stackoverflow.com/a/15502739/1132334, stackoverflow.com/a/2205777/1132334
– dlatikay
Nov 21 '18 at 15:49
related: stackoverflow.com/a/15502739/1132334, stackoverflow.com/a/2205777/1132334
– dlatikay
Nov 21 '18 at 15:49
I don't think I overrode the oninstallation method... To set the user account to local system, I had ProjectInstaller.cs open in Design View, I left clicked on serviceProcessInstaller1, and in the properties box beneath Misc, I set Account to "LocalSystem". Not sure if it matters, but I tried LocalService and NetworkService and received the same results. Would you still like to see my code - I left everything as default and did not make any modifications other than what I mentioned?
– nightmare637
Nov 21 '18 at 15:52
I don't think I overrode the oninstallation method... To set the user account to local system, I had ProjectInstaller.cs open in Design View, I left clicked on serviceProcessInstaller1, and in the properties box beneath Misc, I set Account to "LocalSystem". Not sure if it matters, but I tried LocalService and NetworkService and received the same results. Would you still like to see my code - I left everything as default and did not make any modifications other than what I mentioned?
– nightmare637
Nov 21 '18 at 15:52
Not sure, what your service does, simple guessing ... there is a check-box for installed services, that 'Allow service to interact with desktop'. Please read this post, since setting that flag might be a security concern (it can be set programmatically).
– nilsK
Nov 21 '18 at 15:55
Not sure, what your service does, simple guessing ... there is a check-box for installed services, that 'Allow service to interact with desktop'. Please read this post, since setting that flag might be a security concern (it can be set programmatically).
– nilsK
Nov 21 '18 at 15:55
nilsK, I have to have the service installed in the first place to be able to check that flag.
– nightmare637
Nov 21 '18 at 16:11
nilsK, I have to have the service installed in the first place to be able to check that flag.
– nightmare637
Nov 21 '18 at 16:11
|
show 9 more comments
2 Answers
2
active
oldest
votes
Enter the full path to installUtil & your service binary in an elevated prompt, that could do.
answered Nov 21 '18 at 15:41
KianiiKianii
1368
how/why is that different to "I run command prompt as administrator"
– dlatikay
Nov 21 '18 at 15:44
As dlatikay said, I am already running the prompt as administrator. Also, I was running installUtil from the full path to begin with. I was not running the service binary in the full path since I was already working from that directory to begin with. However, I did try running both from the full path and it still did not work.
– nightmare637
Nov 21 '18 at 15:48
The point is not in "as administrator" but in "full path". it's a well known bug that i aslo encountered myself. but anyway, it did not work
– Kianii
Nov 21 '18 at 15:56
No, but thank you so much for your suggestion!
– nightmare637
Nov 21 '18 at 16:08
add a comment |
I was FINALLY able to resolve this issue. I was able to get to the bottom of it by using SysInternal's Process Monitor. I opened up the program and had it take logs for InstallUtil.exe. From there, I began to search for any logs that said "Access Denied". As I sorted through them, I noticed something interesting: it was trying to create a registry key, but it kept failing!
So I went into the registry and created a key named "ServiceTest". After that, I ran the InstallUtil command again, and it worked!
If anyone else is having trouble, the solution is to create a key named after your process name in the following location:
HKLMSystemCurrentControlSetServicesEventLogApplication
answered Jan 8 at 15:14
nightmare637nightmare637
729
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53415545%2fwindows-service-unauthorizedaccessexception-error-when-installing-service-c%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Enter the full path to installUtil & your service binary in an elevated prompt, that could do.
answered Nov 21 '18 at 15:41
KianiiKianii
1368
how/why is that different to "I run command prompt as administrator"
– dlatikay
Nov 21 '18 at 15:44
As dlatikay said, I am already running the prompt as administrator. Also, I was running installUtil from the full path to begin with. I was not running the service binary in the full path since I was already working from that directory to begin with. However, I did try running both from the full path and it still did not work.
– nightmare637
Nov 21 '18 at 15:48
The point is not in "as administrator" but in "full path". it's a well known bug that i aslo encountered myself. but anyway, it did not work
– Kianii
Nov 21 '18 at 15:56
No, but thank you so much for your suggestion!
– nightmare637
Nov 21 '18 at 16:08
add a comment |
Enter the full path to installUtil & your service binary in an elevated prompt, that could do.
answered Nov 21 '18 at 15:41
KianiiKianii
1368
how/why is that different to "I run command prompt as administrator"
– dlatikay
Nov 21 '18 at 15:44
As dlatikay said, I am already running the prompt as administrator. Also, I was running installUtil from the full path to begin with. I was not running the service binary in the full path since I was already working from that directory to begin with. However, I did try running both from the full path and it still did not work.
– nightmare637
Nov 21 '18 at 15:48
The point is not in "as administrator" but in "full path". it's a well known bug that i aslo encountered myself. but anyway, it did not work
– Kianii
Nov 21 '18 at 15:56
No, but thank you so much for your suggestion!
– nightmare637
Nov 21 '18 at 16:08
add a comment |
Enter the full path to installUtil & your service binary in an elevated prompt, that could do.
answered Nov 21 '18 at 15:41
KianiiKianii
1368
Enter the full path to installUtil & your service binary in an elevated prompt, that could do.
answered Nov 21 '18 at 15:41
KianiiKianii
1368
edited Nov 21 '18 at 16:00
answered Nov 21 '18 at 15:41
KianiiKianii
1368
answered Nov 21 '18 at 15:41
KianiiKianii
1368
answered Nov 21 '18 at 15:41
KianiiKianii
1368
1368
how/why is that different to "I run command prompt as administrator"
– dlatikay
Nov 21 '18 at 15:44
As dlatikay said, I am already running the prompt as administrator. Also, I was running installUtil from the full path to begin with. I was not running the service binary in the full path since I was already working from that directory to begin with. However, I did try running both from the full path and it still did not work.
– nightmare637
Nov 21 '18 at 15:48
The point is not in "as administrator" but in "full path". it's a well known bug that i aslo encountered myself. but anyway, it did not work
– Kianii
Nov 21 '18 at 15:56
No, but thank you so much for your suggestion!
– nightmare637
Nov 21 '18 at 16:08
add a comment |
how/why is that different to "I run command prompt as administrator"
– dlatikay
Nov 21 '18 at 15:44
As dlatikay said, I am already running the prompt as administrator. Also, I was running installUtil from the full path to begin with. I was not running the service binary in the full path since I was already working from that directory to begin with. However, I did try running both from the full path and it still did not work.
– nightmare637
Nov 21 '18 at 15:48
The point is not in "as administrator" but in "full path". it's a well known bug that i aslo encountered myself. but anyway, it did not work
– Kianii
Nov 21 '18 at 15:56
No, but thank you so much for your suggestion!
– nightmare637
Nov 21 '18 at 16:08
how/why is that different to "I run command prompt as administrator"
– dlatikay
Nov 21 '18 at 15:44
how/why is that different to "I run command prompt as administrator"
– dlatikay
Nov 21 '18 at 15:44
As dlatikay said, I am already running the prompt as administrator. Also, I was running installUtil from the full path to begin with. I was not running the service binary in the full path since I was already working from that directory to begin with. However, I did try running both from the full path and it still did not work.
– nightmare637
Nov 21 '18 at 15:48
As dlatikay said, I am already running the prompt as administrator. Also, I was running installUtil from the full path to begin with. I was not running the service binary in the full path since I was already working from that directory to begin with. However, I did try running both from the full path and it still did not work.
– nightmare637
Nov 21 '18 at 15:48
The point is not in "as administrator" but in "full path". it's a well known bug that i aslo encountered myself. but anyway, it did not work
– Kianii
Nov 21 '18 at 15:56
The point is not in "as administrator" but in "full path". it's a well known bug that i aslo encountered myself. but anyway, it did not work
– Kianii
Nov 21 '18 at 15:56
No, but thank you so much for your suggestion!
– nightmare637
Nov 21 '18 at 16:08
No, but thank you so much for your suggestion!
– nightmare637
Nov 21 '18 at 16:08
add a comment |
I was FINALLY able to resolve this issue. I was able to get to the bottom of it by using SysInternal's Process Monitor. I opened up the program and had it take logs for InstallUtil.exe. From there, I began to search for any logs that said "Access Denied". As I sorted through them, I noticed something interesting: it was trying to create a registry key, but it kept failing!
So I went into the registry and created a key named "ServiceTest". After that, I ran the InstallUtil command again, and it worked!
If anyone else is having trouble, the solution is to create a key named after your process name in the following location:
HKLMSystemCurrentControlSetServicesEventLogApplication
answered Jan 8 at 15:14
nightmare637nightmare637
729
add a comment |
I was FINALLY able to resolve this issue. I was able to get to the bottom of it by using SysInternal's Process Monitor. I opened up the program and had it take logs for InstallUtil.exe. From there, I began to search for any logs that said "Access Denied". As I sorted through them, I noticed something interesting: it was trying to create a registry key, but it kept failing!
So I went into the registry and created a key named "ServiceTest". After that, I ran the InstallUtil command again, and it worked!
If anyone else is having trouble, the solution is to create a key named after your process name in the following location:
HKLMSystemCurrentControlSetServicesEventLogApplication
answered Jan 8 at 15:14
nightmare637nightmare637
729
add a comment |
I was FINALLY able to resolve this issue. I was able to get to the bottom of it by using SysInternal's Process Monitor. I opened up the program and had it take logs for InstallUtil.exe. From there, I began to search for any logs that said "Access Denied". As I sorted through them, I noticed something interesting: it was trying to create a registry key, but it kept failing!
So I went into the registry and created a key named "ServiceTest". After that, I ran the InstallUtil command again, and it worked!
If anyone else is having trouble, the solution is to create a key named after your process name in the following location:
HKLMSystemCurrentControlSetServicesEventLogApplication
answered Jan 8 at 15:14
nightmare637nightmare637
729
I was FINALLY able to resolve this issue. I was able to get to the bottom of it by using SysInternal's Process Monitor. I opened up the program and had it take logs for InstallUtil.exe. From there, I began to search for any logs that said "Access Denied". As I sorted through them, I noticed something interesting: it was trying to create a registry key, but it kept failing!
So I went into the registry and created a key named "ServiceTest". After that, I ran the InstallUtil command again, and it worked!
If anyone else is having trouble, the solution is to create a key named after your process name in the following location:
HKLMSystemCurrentControlSetServicesEventLogApplication
answered Jan 8 at 15:14
nightmare637nightmare637
729
answered Jan 8 at 15:14
nightmare637nightmare637
729
answered Jan 8 at 15:14
nightmare637nightmare637
729
answered Jan 8 at 15:14
nightmare637nightmare637
729
729
add a comment |
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53415545%2fwindows-service-unauthorizedaccessexception-error-when-installing-service-c%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
could you show the parts of your code where you override the oninstallation method to set the user account to localsystem? try leaving that out at first, does it work then?
– dlatikay
Nov 21 '18 at 15:39
related: stackoverflow.com/a/15502739/1132334, stackoverflow.com/a/2205777/1132334
– dlatikay
Nov 21 '18 at 15:49
I don't think I overrode the oninstallation method... To set the user account to local system, I had ProjectInstaller.cs open in Design View, I left clicked on serviceProcessInstaller1, and in the properties box beneath Misc, I set Account to "LocalSystem". Not sure if it matters, but I tried LocalService and NetworkService and received the same results. Would you still like to see my code - I left everything as default and did not make any modifications other than what I mentioned?
– nightmare637
Nov 21 '18 at 15:52
Not sure, what your service does, simple guessing ... there is a check-box for installed services, that 'Allow service to interact with desktop'. Please read this post, since setting that flag might be a security concern (it can be set programmatically).
– nilsK
Nov 21 '18 at 15:55
nilsK, I have to have the service installed in the first place to be able to check that flag.
– nightmare637
Nov 21 '18 at 16:11