Mixing
Is there a name for a 3D shape that looks like a circle when viewed from one axis, a square from another, and...
$begingroup$
The shape can be constructed by taking a cylinder with its height equal to its diameter and cutting a triangle out of it when viewing it from the side with the base of the triangle matching one end of the cylinder and the opposite point of the triangle in the center of where the opposite end of the cylinder was.
Is there a name for this shape?
geometry 3d
asked Sep 30 '16 at 0:32
m_duranm_duran
261
$endgroup$
add a comment |
$begingroup$
The shape can be constructed by taking a cylinder with its height equal to its diameter and cutting a triangle out of it when viewing it from the side with the base of the triangle matching one end of the cylinder and the opposite point of the triangle in the center of where the opposite end of the cylinder was.
Is there a name for this shape?
geometry 3d
asked Sep 30 '16 at 0:32
m_duranm_duran
261
$endgroup$
add a comment |
$begingroup$
The shape can be constructed by taking a cylinder with its height equal to its diameter and cutting a triangle out of it when viewing it from the side with the base of the triangle matching one end of the cylinder and the opposite point of the triangle in the center of where the opposite end of the cylinder was.
Is there a name for this shape?
geometry 3d
asked Sep 30 '16 at 0:32
m_duranm_duran
261
$endgroup$
The shape can be constructed by taking a cylinder with its height equal to its diameter and cutting a triangle out of it when viewing it from the side with the base of the triangle matching one end of the cylinder and the opposite point of the triangle in the center of where the opposite end of the cylinder was.
Is there a name for this shape?
geometry 3d
geometry 3d
asked Sep 30 '16 at 0:32
m_duranm_duran
261
asked Sep 30 '16 at 0:32
m_duranm_duran
261
asked Sep 30 '16 at 0:32
m_duranm_duran
261
asked Sep 30 '16 at 0:32
m_duranm_duran
261
asked Sep 30 '16 at 0:32
m_duranm_duran
261
261
add a comment |
add a comment |
4 Answers
4
active
oldest
votes
$begingroup$
Like this?
It has three Forms depending from which side you look:
answered Sep 30 '16 at 0:45
Julien KlugeJulien Kluge
22417
$endgroup$
$begingroup$
Very nice. Just curious how did you draw this?
$endgroup$
– yoyostein
Sep 30 '16 at 1:49
1
$begingroup$
I used Mathematica's RegionPlot3D and added three constraints for the three planes accordingly. In the end i just increased the plotpoints and voilá
$endgroup$
– Julien Kluge
Sep 30 '16 at 10:22
$begingroup$
Yes exactly like this. Does this have a name?
$endgroup$
– m_duran
Sep 30 '16 at 17:17
add a comment |
$begingroup$
The shape displayed in Julien Kluge's answer may be seen as a special version of a cylindrical segment, which MathWorld describes as the solid cut from a circular cylinder by two (or more) planes.
In any case, it can be made by removing two cylindrical hooves from a cylinder. No idea whether there is a distinctive name for what is left, but the name cylindrical wedge is already reserved for the version with only one slanted cut through the cylinder base, examples of which are the cylindrical hooves mentioned above.
answered Sep 30 '16 at 1:09
ccornccorn
8,25822047
$endgroup$
add a comment |
$begingroup$
It is called a chisel tip. A round chisel. However, not all chisels are round.
answered Sep 30 '16 at 1:35
Sohail SiSohail Si
15617
$endgroup$
add a comment |
$begingroup$
For a circular base it is like a pencil lead sharp chisel line edge cut/ground by sandpaper that way for drawing thin lines. Elliptic arc intersection lines on side view appear together with square border.
answered Oct 23 '16 at 20:16
NarasimhamNarasimham
21.2k62258
$endgroup$
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "69"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmath.stackexchange.com%2fquestions%2f1947363%2fis-there-a-name-for-a-3d-shape-that-looks-like-a-circle-when-viewed-from-one-axi%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
4 Answers
4
active
oldest
votes
4 Answers
4
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Like this?
It has three Forms depending from which side you look:
answered Sep 30 '16 at 0:45
Julien KlugeJulien Kluge
22417
$endgroup$
$begingroup$
Very nice. Just curious how did you draw this?
$endgroup$
– yoyostein
Sep 30 '16 at 1:49
1
$begingroup$
I used Mathematica's RegionPlot3D and added three constraints for the three planes accordingly. In the end i just increased the plotpoints and voilá
$endgroup$
– Julien Kluge
Sep 30 '16 at 10:22
$begingroup$
Yes exactly like this. Does this have a name?
$endgroup$
– m_duran
Sep 30 '16 at 17:17
add a comment |
$begingroup$
Like this?
It has three Forms depending from which side you look:
answered Sep 30 '16 at 0:45
Julien KlugeJulien Kluge
22417
$endgroup$
$begingroup$
Very nice. Just curious how did you draw this?
$endgroup$
– yoyostein
Sep 30 '16 at 1:49
1
$begingroup$
I used Mathematica's RegionPlot3D and added three constraints for the three planes accordingly. In the end i just increased the plotpoints and voilá
$endgroup$
– Julien Kluge
Sep 30 '16 at 10:22
$begingroup$
Yes exactly like this. Does this have a name?
$endgroup$
– m_duran
Sep 30 '16 at 17:17
add a comment |
$begingroup$
Like this?
It has three Forms depending from which side you look:
answered Sep 30 '16 at 0:45
Julien KlugeJulien Kluge
22417
$endgroup$
Like this?
It has three Forms depending from which side you look:
answered Sep 30 '16 at 0:45
Julien KlugeJulien Kluge
22417
answered Sep 30 '16 at 0:45
Julien KlugeJulien Kluge
22417
answered Sep 30 '16 at 0:45
Julien KlugeJulien Kluge
22417
answered Sep 30 '16 at 0:45
Julien KlugeJulien Kluge
22417
22417
$begingroup$
Very nice. Just curious how did you draw this?
$endgroup$
– yoyostein
Sep 30 '16 at 1:49
1
$begingroup$
I used Mathematica's RegionPlot3D and added three constraints for the three planes accordingly. In the end i just increased the plotpoints and voilá
$endgroup$
– Julien Kluge
Sep 30 '16 at 10:22
$begingroup$
Yes exactly like this. Does this have a name?
$endgroup$
– m_duran
Sep 30 '16 at 17:17
add a comment |
$begingroup$
Very nice. Just curious how did you draw this?
$endgroup$
– yoyostein
Sep 30 '16 at 1:49
1
$begingroup$
I used Mathematica's RegionPlot3D and added three constraints for the three planes accordingly. In the end i just increased the plotpoints and voilá
$endgroup$
– Julien Kluge
Sep 30 '16 at 10:22
$begingroup$
Yes exactly like this. Does this have a name?
$endgroup$
– m_duran
Sep 30 '16 at 17:17
$begingroup$
Very nice. Just curious how did you draw this?
$endgroup$
– yoyostein
Sep 30 '16 at 1:49
$begingroup$
Very nice. Just curious how did you draw this?
$endgroup$
– yoyostein
Sep 30 '16 at 1:49
1
1
$begingroup$
I used Mathematica's RegionPlot3D and added three constraints for the three planes accordingly. In the end i just increased the plotpoints and voilá
$endgroup$
– Julien Kluge
Sep 30 '16 at 10:22
$begingroup$
I used Mathematica's RegionPlot3D and added three constraints for the three planes accordingly. In the end i just increased the plotpoints and voilá
$endgroup$
– Julien Kluge
Sep 30 '16 at 10:22
$begingroup$
Yes exactly like this. Does this have a name?
$endgroup$
– m_duran
Sep 30 '16 at 17:17
$begingroup$
Yes exactly like this. Does this have a name?
$endgroup$
– m_duran
Sep 30 '16 at 17:17
add a comment |
$begingroup$
The shape displayed in Julien Kluge's answer may be seen as a special version of a cylindrical segment, which MathWorld describes as the solid cut from a circular cylinder by two (or more) planes.
In any case, it can be made by removing two cylindrical hooves from a cylinder. No idea whether there is a distinctive name for what is left, but the name cylindrical wedge is already reserved for the version with only one slanted cut through the cylinder base, examples of which are the cylindrical hooves mentioned above.
answered Sep 30 '16 at 1:09
ccornccorn
8,25822047
$endgroup$
add a comment |
$begingroup$
The shape displayed in Julien Kluge's answer may be seen as a special version of a cylindrical segment, which MathWorld describes as the solid cut from a circular cylinder by two (or more) planes.
In any case, it can be made by removing two cylindrical hooves from a cylinder. No idea whether there is a distinctive name for what is left, but the name cylindrical wedge is already reserved for the version with only one slanted cut through the cylinder base, examples of which are the cylindrical hooves mentioned above.
answered Sep 30 '16 at 1:09
ccornccorn
8,25822047
$endgroup$
add a comment |
$begingroup$
The shape displayed in Julien Kluge's answer may be seen as a special version of a cylindrical segment, which MathWorld describes as the solid cut from a circular cylinder by two (or more) planes.
In any case, it can be made by removing two cylindrical hooves from a cylinder. No idea whether there is a distinctive name for what is left, but the name cylindrical wedge is already reserved for the version with only one slanted cut through the cylinder base, examples of which are the cylindrical hooves mentioned above.
answered Sep 30 '16 at 1:09
ccornccorn
8,25822047
$endgroup$
The shape displayed in Julien Kluge's answer may be seen as a special version of a cylindrical segment, which MathWorld describes as the solid cut from a circular cylinder by two (or more) planes.
In any case, it can be made by removing two cylindrical hooves from a cylinder. No idea whether there is a distinctive name for what is left, but the name cylindrical wedge is already reserved for the version with only one slanted cut through the cylinder base, examples of which are the cylindrical hooves mentioned above.
answered Sep 30 '16 at 1:09
ccornccorn
8,25822047
edited Sep 30 '16 at 1:50
answered Sep 30 '16 at 1:09
ccornccorn
8,25822047
answered Sep 30 '16 at 1:09
ccornccorn
8,25822047
answered Sep 30 '16 at 1:09
ccornccorn
8,25822047
8,25822047
add a comment |
add a comment |
$begingroup$
It is called a chisel tip. A round chisel. However, not all chisels are round.
answered Sep 30 '16 at 1:35
Sohail SiSohail Si
15617
$endgroup$
add a comment |
$begingroup$
It is called a chisel tip. A round chisel. However, not all chisels are round.
answered Sep 30 '16 at 1:35
Sohail SiSohail Si
15617
$endgroup$
add a comment |
$begingroup$
It is called a chisel tip. A round chisel. However, not all chisels are round.
answered Sep 30 '16 at 1:35
Sohail SiSohail Si
15617
$endgroup$
It is called a chisel tip. A round chisel. However, not all chisels are round.
answered Sep 30 '16 at 1:35
Sohail SiSohail Si
15617
edited Feb 2 at 18:40
answered Sep 30 '16 at 1:35
Sohail SiSohail Si
15617
answered Sep 30 '16 at 1:35
Sohail SiSohail Si
15617
answered Sep 30 '16 at 1:35
Sohail SiSohail Si
15617
15617
add a comment |
add a comment |
$begingroup$
For a circular base it is like a pencil lead sharp chisel line edge cut/ground by sandpaper that way for drawing thin lines. Elliptic arc intersection lines on side view appear together with square border.
answered Oct 23 '16 at 20:16
NarasimhamNarasimham
21.2k62258
$endgroup$
add a comment |
$begingroup$
For a circular base it is like a pencil lead sharp chisel line edge cut/ground by sandpaper that way for drawing thin lines. Elliptic arc intersection lines on side view appear together with square border.
answered Oct 23 '16 at 20:16
NarasimhamNarasimham
21.2k62258
$endgroup$
add a comment |
$begingroup$
For a circular base it is like a pencil lead sharp chisel line edge cut/ground by sandpaper that way for drawing thin lines. Elliptic arc intersection lines on side view appear together with square border.
answered Oct 23 '16 at 20:16
NarasimhamNarasimham
21.2k62258
$endgroup$
For a circular base it is like a pencil lead sharp chisel line edge cut/ground by sandpaper that way for drawing thin lines. Elliptic arc intersection lines on side view appear together with square border.
answered Oct 23 '16 at 20:16
NarasimhamNarasimham
21.2k62258
answered Oct 23 '16 at 20:16
NarasimhamNarasimham
21.2k62258
answered Oct 23 '16 at 20:16
NarasimhamNarasimham
21.2k62258
answered Oct 23 '16 at 20:16
NarasimhamNarasimham
21.2k62258
21.2k62258
add a comment |
add a comment |
Thanks for contributing an answer to Mathematics Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmath.stackexchange.com%2fquestions%2f1947363%2fis-there-a-name-for-a-3d-shape-that-looks-like-a-circle-when-viewed-from-one-axi%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
